[PATCH] backlight: qcom-wled: Use sink_addr for sync toggle

[kgunda at codeaurora.org]

On 2021-03-15 17:51, Daniel Thompson wrote:
> On Sun, Mar 14, 2021 at 11:11:10AM +0100, Marijn Suijten wrote:
>> From: Obeida Shamoun <oshmoun100 at googlemail.com>
>> 
>> WLED3_SINK_REG_SYNC is, as the name implies, a sink register offset.
>> Therefore, use the sink address as base instead of the ctrl address.
>> 
>> This fixes the sync toggle on wled4, which can be observed by the fact
>> that adjusting brightness now works.
>> 
>> It has no effect on wled3 because sink and ctrl base addresses are the
>> same.  This allows adjusting the brightness without having to disable
>> then reenable the module.
>> 
>> Signed-off-by: Obeida Shamoun <oshmoun100 at googlemail.com>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio at somainline.org>
>> Signed-off-by: Marijn Suijten <marijn.suijten at somainline.org>
> 
> LGTM, although an acked-by from Kiran would be nice to have:
> Reviewed-by: Daniel Thompson <daniel.thompson at linaro.org>
> 
> 
> Daniel.
> 
> 
Acked-by: Kiran Gunda <kgunda at codeaurora.org>

>> ---
>>  drivers/video/backlight/qcom-wled.c | 4 ++--
>>  1 file changed, 2 insertions(+), 2 deletions(-)
>> 
>> diff --git a/drivers/video/backlight/qcom-wled.c 
>> b/drivers/video/backlight/qcom-wled.c
>> index 091f07e7c145..fc8b443d10fd 100644
>> --- a/drivers/video/backlight/qcom-wled.c
>> +++ b/drivers/video/backlight/qcom-wled.c
>> @@ -336,13 +336,13 @@ static int wled3_sync_toggle(struct wled *wled)
>>  	unsigned int mask = GENMASK(wled->max_string_count - 1, 0);
>> 
>>  	rc = regmap_update_bits(wled->regmap,
>> -				wled->ctrl_addr + WLED3_SINK_REG_SYNC,
>> +				wled->sink_addr + WLED3_SINK_REG_SYNC,
>>  				mask, mask);
>>  	if (rc < 0)
>>  		return rc;
>> 
>>  	rc = regmap_update_bits(wled->regmap,
>> -				wled->ctrl_addr + WLED3_SINK_REG_SYNC,
>> +				wled->sink_addr + WLED3_SINK_REG_SYNC,
>>  				mask, WLED3_SINK_REG_SYNC_CLEAR);
>> 
>>  	return rc;
>> --
>> 2.30.2
>>