[PATCH v5 4/5] drm/bridge: anx7625: add HDCP support

Xin Ji xji at analogixsemi.com
Fri Mar 19 02:38:33 UTC 2021


Add HDCP feature, enable HDCP function through chip internal key
and downstream's capability.

Signed-off-by: Xin Ji <xji at analogixsemi.com>
---
 drivers/gpu/drm/bridge/analogix/anx7625.c | 147 ++++++++++++++++++++++++++++++
 drivers/gpu/drm/bridge/analogix/anx7625.h |  36 ++++++++
 2 files changed, 183 insertions(+)

diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 5c9b801..5e19170 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -633,6 +633,150 @@ static int anx7625_dpi_config(struct anx7625_data *ctx)
 	return ret;
 }
 
+static int anx7625_aux_dpcd_read(struct anx7625_data *ctx,
+				 u8 addrh, u8 addrm, u8 addrl,
+				 u8 len, u8 *buf)
+{
+	struct device *dev = &ctx->client->dev;
+	int ret;
+	u8 cmd;
+
+	if (len > MAX_DPCD_BUFFER_SIZE) {
+		DRM_DEV_ERROR(dev, "exceed aux buffer len.\n");
+		return -E2BIG;
+	}
+
+	cmd = ((len - 1) << 4) | 0x09;
+
+	/* Set command and length */
+	ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				AP_AUX_COMMAND, cmd);
+
+	/* Set aux access address */
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 AP_AUX_ADDR_7_0, addrl);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 AP_AUX_ADDR_15_8, addrm);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 AP_AUX_ADDR_19_16, addrh);
+
+	/* Enable aux access */
+	ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
+				AP_AUX_CTRL_STATUS, AP_AUX_CTRL_OP_EN);
+
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "cannot access aux related register.\n");
+		return -EIO;
+	}
+
+	usleep_range(2000, 2100);
+
+	ret = wait_aux_op_finish(ctx);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "aux IO error: wait aux op finish.\n");
+		return ret;
+	}
+
+	ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client,
+				     AP_AUX_BUFF_START, len, buf);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "read dpcd register failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int anx7625_read_flash_status(struct anx7625_data *ctx)
+{
+	return anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, R_RAM_CTRL);
+}
+
+static int anx7625_hdcp_key_probe(struct anx7625_data *ctx)
+{
+	int ret, val;
+	struct device *dev = &ctx->client->dev;
+	u8 ident[32];
+
+	ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				FLASH_ADDR_HIGH, 0x91);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 FLASH_ADDR_LOW, 0xA0);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "IO error : set key flash address.\n");
+		return ret;
+	}
+
+	ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				FLASH_LEN_HIGH, (FLASH_BUF_LEN - 1) >> 8);
+	ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				 FLASH_LEN_LOW, (FLASH_BUF_LEN - 1) & 0xFF);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "IO error : set key flash len.\n");
+		return ret;
+	}
+
+	ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
+				R_FLASH_RW_CTRL, FLASH_READ);
+	ret |= readx_poll_timeout(anx7625_read_flash_status,
+				  ctx, val,
+				  ((val & FLASH_DONE) || (val < 0)),
+				  2000,
+				  2000 * 150);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "flash read access fail!\n");
+		return -EIO;
+	}
+
+	ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client,
+				     FLASH_BUF_BASE_ADDR,
+				     FLASH_BUF_LEN, ident);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "read flash data fail!\n");
+		return -EIO;
+	}
+
+	if (ident[29] == 0xFF && ident[30] == 0xFF && ident[31] == 0xFF)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int anx7625_hdcp_setting(struct anx7625_data *ctx)
+{
+	u8 bcap;
+	int ret;
+	struct device *dev = &ctx->client->dev;
+
+	ret = anx7625_hdcp_key_probe(ctx);
+	if (ret) {
+		DRM_DEV_DEBUG_DRIVER(dev, "disable HDCP by config\n");
+		return anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
+					 0xee, 0x9f);
+	}
+
+	anx7625_aux_dpcd_read(ctx, 0x06, 0x80, 0x28, 1, &bcap);
+	if (!(bcap & 0x01)) {
+		DRM_DEV_DEBUG_DRIVER(dev, "bcap(0x%x) not support HDCP 1.4.\n",
+				     bcap);
+		return anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
+					 0xee, 0x9f);
+	}
+
+	DRM_DEV_DEBUG_DRIVER(dev, "enable HDCP 1.4\n");
+
+	ret = anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xee, 0x20);
+
+	/* Try auth flag */
+	ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xec, 0x10);
+	/* Interrupt for DRM */
+	ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xff, 0x01);
+	if (ret < 0)
+		DRM_DEV_ERROR(dev, "fail to enable HDCP\n");
+
+	return ret;
+}
+
 static void anx7625_dp_start(struct anx7625_data *ctx)
 {
 	int ret;
@@ -643,6 +787,9 @@ static void anx7625_dp_start(struct anx7625_data *ctx)
 		return;
 	}
 
+	/* HDCP config */
+	anx7625_hdcp_setting(ctx);
+
 	if (ctx->pdata.is_dpi)
 		ret = anx7625_dpi_config(ctx);
 	else
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
index beee95d..c6f93e4 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.h
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
@@ -154,9 +154,45 @@
 
 #define  I2C_ADDR_7E_FLASH_CONTROLLER  0x7E
 
+#define FLASH_SRAM_SEL          0x00
+#define SRAM_ADDR_HIGH          0x01
+#define SRAM_ADDR_LOW           0x02
+#define SRAM_LEN_HIGH           0x03
+#define SRAM_LEN_LOW            0x04
 #define FLASH_LOAD_STA          0x05
 #define FLASH_LOAD_STA_CHK	BIT(7)
 
+#define R_RAM_CTRL              0x05
+/* bit positions */
+#define FLASH_DONE              BIT(7)
+#define BOOT_LOAD_DONE          BIT(6)
+#define CRC_OK                  BIT(5)
+#define LOAD_DONE               BIT(4)
+#define O_RW_DONE               BIT(3)
+#define FUSE_BUSY               BIT(2)
+#define DECRYPT_EN              BIT(1)
+#define LOAD_START              BIT(0)
+
+#define FLASH_ADDR_HIGH         0x0F
+#define FLASH_ADDR_LOW          0x10
+#define FLASH_LEN_HIGH          0x31
+#define FLASH_LEN_LOW           0x32
+
+#define R_FLASH_RW_CTRL         0x33
+/* bit positions */
+#define READ_DELAY_SELECT       BIT(7)
+#define GENERAL_INSTRUCTION_EN  BIT(6)
+#define FLASH_ERASE_EN          BIT(5)
+#define RDID_READ_EN            BIT(4)
+#define REMS_READ_EN            BIT(3)
+#define WRITE_STATUS_EN         BIT(2)
+#define FLASH_READ              BIT(1)
+#define FLASH_WRITE             BIT(0)
+
+#define FLASH_BUF_BASE_ADDR     0x60
+#define FLASH_BUF_LEN           0x20
+#define FLASH_KEY_OFFSET        0x8000
+
 #define  XTAL_FRQ_SEL    0x3F
 /* bit field positions */
 #define  XTAL_FRQ_SEL_POS    5
-- 
2.7.4



More information about the dri-devel mailing list