[PATCH v6 1/5] dt-bindings:drm/bridge:anx7625:add vendor define flags

[Laurent Pinchart]

Hi Xin,

Thank you for the patch.

On Fri, Mar 19, 2021 at 02:32:39PM +0800, Xin Ji wrote:
> Add 'bus-type' and 'data-lanes' define for port0. Define DP tx lane0,
> lane1 swing register array define, and audio enable flag.
> 
> Signed-off-by: Xin Ji <xji at analogixsemi.com>
> ---
>  .../display/bridge/analogix,anx7625.yaml      | 58 ++++++++++++++++++-
>  1 file changed, 57 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> index c789784efe30..3f54d5876982 100644
> --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> @@ -34,6 +34,26 @@ properties:
>      description: used for reset chip control, RESET_N pin B7.
>      maxItems: 1
>  
> +  analogix,lane0-swing:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    minItems: 1
> +    maxItems: 20
> +    description:
> +      an array of swing register setting for DP tx lane0 PHY, please don't
> +      add this property, or contact vendor.

DT properties need to be documented. Contacting the vendor doesn't count
as documentation I'm afraid.

> +
> +  analogix,lane1-swing:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    minItems: 1
> +    maxItems: 20
> +    description:
> +      an array of swing register setting for DP tx lane1 PHY, please don't
> +      add this property, or contact vendor.
> +
> +  analogix,audio-enable:
> +    type: boolean
> +    description: let the driver enable audio HDMI codec function or not.
> +
>    ports:
>      $ref: /schemas/graph.yaml#/properties/ports
>  
> @@ -41,13 +61,43 @@ properties:
>        port at 0:
>          $ref: /schemas/graph.yaml#/properties/port
>          description:
> -          Video port for MIPI DSI input.
> +          MIPI DSI/DPI input.
> +
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#
> +            type: object
> +            additionalProperties: false
> +
> +            properties:
> +              remote-endpoint: true
> +              bus-type: true
> +              data-lanes: true
> +
> +            required:
> +              - remote-endpoint
> +
> +        required:
> +          - endpoint
> +
>  
>        port at 1:
>          $ref: /schemas/graph.yaml#/properties/port
>          description:
>            Video port for panel or connector.
>  
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#
> +            type: object
> +            additionalProperties: false
> +
> +            properties:
> +              remote-endpoint: true
> +
> +            required:
> +              - remote-endpoint
> +
>      required:
>        - port at 0
>        - port at 1
> @@ -73,6 +123,10 @@ examples:
>              enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
>              reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
>  
> +            analogix,audio-enable;
> +            analogix,lane0-swing = <0x14 0x54 0x64 0x74 0x29 0x7b 0x77 0x5b>;
> +            analogix,lane1-swing = <0x14 0x54 0x64 0x74 0x29 0x7b 0x77 0x5b>;
> +
>              ports {
>                  #address-cells = <1>;
>                  #size-cells = <0>;
> @@ -81,6 +135,8 @@ examples:
>                      reg = <0>;
>                      anx7625_in: endpoint {
>                          remote-endpoint = <&mipi_dsi>;
> +                        bus-type = <5>;
> +                        data-lanes = <0 1 2 3>;
>                      };
>                  };
>  

-- 
Regards,

Laurent Pinchart