[PATCH v5 05/21] gpu: host1x: Use HW-equivalent syncpoint expiration check

[Thierry Reding]

On Mon, Jan 11, 2021 at 03:00:03PM +0200, Mikko Perttunen wrote:
> Make syncpoint expiration checks always use the same logic used by
> the hardware. This ensures that there are no race conditions that
> could occur because of the hardware triggering a syncpoint interrupt
> and then the driver disagreeing.
> 
> One situation where this could occur is if a job incremented a
> syncpoint too many times -- then the hardware would trigger an
> interrupt, but the driver would assume that a syncpoint value
> greater than the syncpoint's max value is in the future, and not
> clean up the job.
> 
> Signed-off-by: Mikko Perttunen <mperttunen at nvidia.com>
> ---
>  drivers/gpu/host1x/syncpt.c | 51 ++-----------------------------------
>  1 file changed, 2 insertions(+), 49 deletions(-)
> 
> diff --git a/drivers/gpu/host1x/syncpt.c b/drivers/gpu/host1x/syncpt.c
> index e48b4595cf53..9ccdf7709946 100644
> --- a/drivers/gpu/host1x/syncpt.c
> +++ b/drivers/gpu/host1x/syncpt.c
> @@ -306,59 +306,12 @@ EXPORT_SYMBOL(host1x_syncpt_wait);
>  bool host1x_syncpt_is_expired(struct host1x_syncpt *sp, u32 thresh)
>  {
>  	u32 current_val;
> -	u32 future_val;
>  
>  	smp_rmb();
>  
>  	current_val = (u32)atomic_read(&sp->min_val);
> -	future_val = (u32)atomic_read(&sp->max_val);
> -
> -	/* Note the use of unsigned arithmetic here (mod 1<<32).
> -	 *
> -	 * c = current_val = min_val	= the current value of the syncpoint.
> -	 * t = thresh			= the value we are checking
> -	 * f = future_val  = max_val	= the value c will reach when all
> -	 *				  outstanding increments have completed.
> -	 *
> -	 * Note that c always chases f until it reaches f.
> -	 *
> -	 * Dtf = (f - t)
> -	 * Dtc = (c - t)
> -	 *
> -	 *  Consider all cases:
> -	 *
> -	 *	A) .....c..t..f.....	Dtf < Dtc	need to wait
> -	 *	B) .....c.....f..t..	Dtf > Dtc	expired
> -	 *	C) ..t..c.....f.....	Dtf > Dtc	expired	   (Dct very large)
> -	 *
> -	 *  Any case where f==c: always expired (for any t).	Dtf == Dcf
> -	 *  Any case where t==c: always expired (for any f).	Dtf >= Dtc (because Dtc==0)
> -	 *  Any case where t==f!=c: always wait.		Dtf <  Dtc (because Dtf==0,
> -	 *							Dtc!=0)
> -	 *
> -	 *  Other cases:
> -	 *
> -	 *	A) .....t..f..c.....	Dtf < Dtc	need to wait
> -	 *	A) .....f..c..t.....	Dtf < Dtc	need to wait
> -	 *	A) .....f..t..c.....	Dtf > Dtc	expired
> -	 *
> -	 *   So:
> -	 *	   Dtf >= Dtc implies EXPIRED	(return true)
> -	 *	   Dtf <  Dtc implies WAIT	(return false)
> -	 *
> -	 * Note: If t is expired then we *cannot* wait on it. We would wait
> -	 * forever (hang the system).
> -	 *
> -	 * Note: do NOT get clever and remove the -thresh from both sides. It
> -	 * is NOT the same.
> -	 *
> -	 * If future valueis zero, we have a client managed sync point. In that
> -	 * case we do a direct comparison.
> -	 */
> -	if (!host1x_syncpt_client_managed(sp))
> -		return future_val - thresh >= current_val - thresh;
> -	else
> -		return (s32)(current_val - thresh) >= 0;
> +
> +	return ((current_val - thresh) & 0x80000000U) == 0U;

Heh... now I finally understand what this is supposed to do. =)

Nice one.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20210323/915140a2/attachment-0001.sig>