[PATCH 20/21] drm/msm/dpu: fix smart dma support
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Wed Mar 24 15:00:23 UTC 2021
Downstream driver uses dpu->caps->smart_dma_rev to update
sspp->cap->features with the bit corresponding to the supported SmartDMA
version. Upstream driver does not do this, resulting in SSPP subdriver
not enbaling setup_multirect callback. Make SSPP subdriver check global
smart_dma_rev to decide if setup_multirect should be enabled.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 8 ++++----
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 16 ++++++++++++----
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c | 9 +++++----
3 files changed, 21 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index f21f630af476..5552f45f818c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -145,7 +145,7 @@ static const struct dpu_caps sdm845_dpu_caps = {
.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
.max_mixer_blendstages = 0xb,
.qseed_type = DPU_SSPP_SCALER_QSEED3,
- .smart_dma_rev = DPU_SSPP_SMART_DMA_V2,
+ .smart_dma_rev = DPU_SMART_DMA_V2,
.ubwc_version = DPU_HW_UBWC_VER_20,
.has_src_split = true,
.has_dim_layer = true,
@@ -161,7 +161,7 @@ static const struct dpu_caps sc7180_dpu_caps = {
.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
.max_mixer_blendstages = 0x9,
.qseed_type = DPU_SSPP_SCALER_QSEED4,
- .smart_dma_rev = DPU_SSPP_SMART_DMA_V2,
+ .smart_dma_rev = DPU_SMART_DMA_V2,
.ubwc_version = DPU_HW_UBWC_VER_20,
.has_dim_layer = true,
.has_idle_pc = true,
@@ -173,7 +173,7 @@ static const struct dpu_caps sm8150_dpu_caps = {
.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
.max_mixer_blendstages = 0xb,
.qseed_type = DPU_SSPP_SCALER_QSEED3,
- .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
+ .smart_dma_rev = DPU_SMART_DMA_V2, /* TODO: v2.5 */
.ubwc_version = DPU_HW_UBWC_VER_30,
.has_src_split = true,
.has_dim_layer = true,
@@ -189,7 +189,7 @@ static const struct dpu_caps sm8250_dpu_caps = {
.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
.max_mixer_blendstages = 0xb,
.qseed_type = DPU_SSPP_SCALER_QSEED3LITE,
- .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
+ .smart_dma_rev = DPU_SMART_DMA_V2, /* TODO: v2.5 */
.ubwc_version = DPU_HW_UBWC_VER_40,
.has_src_split = true,
.has_dim_layer = true,
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 08864f0addc4..1202a82918eb 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -70,6 +70,18 @@ enum {
DPU_HW_UBWC_VER_40 = 0x400,
};
+/**
+ * SmartDMA support
+ * @DPU_SMART_DMA_UNSUPPORTED, SmartDMA not support
+ * @DPU_SMART_DMA_V1, SmartDMA 1.0 support
+ * @DPU_SMART_DMA_V2, SmartDMA 2.0 support
+ */
+enum {
+ DPU_SMART_DMA_UNSUPPORTED,
+ DPU_SMART_DMA_V1,
+ DPU_SMART_DMA_V2,
+};
+
/**
* MDP TOP BLOCK features
* @DPU_MDP_PANIC_PER_PIPE Panic configuration needs to be be done per pipe
@@ -104,8 +116,6 @@ enum {
* @DPU_SSPP_QOS, SSPP support QoS control, danger/safe/creq
* @DPU_SSPP_QOS_8LVL, SSPP support 8-level QoS control
* @DPU_SSPP_EXCL_RECT, SSPP supports exclusion rect
- * @DPU_SSPP_SMART_DMA_V1, SmartDMA 1.0 support
- * @DPU_SSPP_SMART_DMA_V2, SmartDMA 2.0 support
* @DPU_SSPP_TS_PREFILL Supports prefill with traffic shaper
* @DPU_SSPP_TS_PREFILL_REC1 Supports prefill with traffic shaper multirec
* @DPU_SSPP_CDP Supports client driven prefetch
@@ -124,8 +134,6 @@ enum {
DPU_SSPP_QOS,
DPU_SSPP_QOS_8LVL,
DPU_SSPP_EXCL_RECT,
- DPU_SSPP_SMART_DMA_V1,
- DPU_SSPP_SMART_DMA_V2,
DPU_SSPP_TS_PREFILL,
DPU_SSPP_TS_PREFILL_REC1,
DPU_SSPP_CDP,
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
index 8734a47040aa..4165ff2d7a3c 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c
@@ -647,7 +647,8 @@ static void dpu_hw_sspp_setup_cdp(struct dpu_hw_pipe *ctx,
}
static void _setup_layer_ops(struct dpu_hw_pipe *c,
- unsigned long features)
+ unsigned long features,
+ int smart_dma_rev)
{
if (test_bit(DPU_SSPP_SRC, &features)) {
c->ops.setup_format = dpu_hw_sspp_setup_format;
@@ -668,8 +669,8 @@ static void _setup_layer_ops(struct dpu_hw_pipe *c,
test_bit(DPU_SSPP_CSC_10BIT, &features))
c->ops.setup_csc = dpu_hw_sspp_setup_csc;
- if (test_bit(DPU_SSPP_SMART_DMA_V1, &c->cap->features) ||
- test_bit(DPU_SSPP_SMART_DMA_V2, &c->cap->features))
+ if (smart_dma_rev == DPU_SMART_DMA_V1 ||
+ smart_dma_rev == DPU_SMART_DMA_V2)
c->ops.setup_multirect = dpu_hw_sspp_setup_multirect;
if (test_bit(DPU_SSPP_SCALER_QSEED3, &features) ||
@@ -731,7 +732,7 @@ struct dpu_hw_pipe *dpu_hw_sspp_init(enum dpu_sspp idx,
hw_pipe->mdp = &catalog->mdp[0];
hw_pipe->idx = idx;
hw_pipe->cap = cfg;
- _setup_layer_ops(hw_pipe, hw_pipe->cap->features);
+ _setup_layer_ops(hw_pipe, hw_pipe->cap->features, catalog->caps->smart_dma_rev);
dpu_hw_blk_init(&hw_pipe->base, DPU_HW_BLK_SSPP, idx);
--
2.30.2
More information about the dri-devel
mailing list