[PATCH v3 2/2] drm: bridge: Add TI SN65DSI83/84/85 DSI to LVDS bridge

[Claudius Heine]

Hi Jagan,

On 2021-02-14 18:44, Jagan Teki wrote:
[...]
> +static void sn65dsi_enable(struct drm_bridge *bridge)
> +{
> +	struct sn65dsi *sn = bridge_to_sn65dsi(bridge);
> +	struct drm_display_mode *mode = bridge_to_mode(bridge);
> +	int bpp = mipi_dsi_pixel_format_to_bpp(sn->dsi->format);
> +	unsigned int lanes = sn->dsi->lanes;
> +	unsigned int pixel_clk = mode->clock * 1000;
> +	unsigned int dsi_clk = pixel_clk * bpp / (lanes * 2);
> +	unsigned int val;
> +
> +	/* reset SOFT_RESET bit */
> +	regmap_write(sn->regmap, SN65DSI_SOFT_RESET, 0x0);
> +
> +	msleep(10);
> +
> +	/* reset PLL_EN bit */
> +	regmap_write(sn->regmap, SN65DSI_CLK_PLL, 0x0);
> +
> +	msleep(10);
> +
> +	/* setup lvds clock */
> +	val = sn65dsi_get_clk_range(0, 5, pixel_clk, 25000000, 25000000);
> +	if (val < 0) {

val is unsigned int, so it can never be negative so this condition is 
always false. Same error further down in that function as well.

regards,
Claudius