[PATCH v4 1/4] arm64: dts: qcom: sm8250: fix display nodes

[Dmitry Baryshkov]

From: Jonathan Marek <jonathan at marek.ca>

Apply these fixes to the newly added sm8250 display ndoes
 - Remove "notused" interconnect (which apparently was blindly copied from
   my old patches)
 - Use dispcc node example from dt-bindings, removing clocks which aren't
   documented or used by the driver and fixing the region size.

Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
Signed-off-by: Jonathan Marek <jonathan at marek.ca>
[DB: compatibility changes split into separate patch]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 27 ++++++---------------------
 1 file changed, 6 insertions(+), 21 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 947e1accae3a..32f0d6a82457 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2327,10 +2327,9 @@ mdss: mdss at ae00000 {
 			reg = <0 0x0ae00000 0 0x1000>;
 			reg-names = "mdss";
 
-			interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>,
-					<&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
 					<&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
-			interconnect-names = "notused", "mdp0-mem", "mdp1-mem";
+			interconnect-names = "mdp0-mem", "mdp1-mem";
 
 			power-domains = <&dispcc MDSS_GDSC>;
 
@@ -2580,7 +2579,7 @@ opp-358000000 {
 
 		dispcc: clock-controller at af00000 {
 			compatible = "qcom,sm8250-dispcc";
-			reg = <0 0x0af00000 0 0x20000>;
+			reg = <0 0x0af00000 0 0x10000>;
 			mmcx-supply = <&mmcx_reg>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&dsi0_phy 0>,
@@ -2588,28 +2587,14 @@ dispcc: clock-controller at af00000 {
 				 <&dsi1_phy 0>,
 				 <&dsi1_phy 1>,
 				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <&sleep_clk>;
+				 <0>;
 			clock-names = "bi_tcxo",
 				      "dsi0_phy_pll_out_byteclk",
 				      "dsi0_phy_pll_out_dsiclk",
 				      "dsi1_phy_pll_out_byteclk",
 				      "dsi1_phy_pll_out_dsiclk",
-				      "dp_link_clk_divsel_ten",
-				      "dp_vco_divided_clk_src_mux",
-				      "dptx1_phy_pll_link_clk",
-				      "dptx1_phy_pll_vco_div_clk",
-				      "dptx2_phy_pll_link_clk",
-				      "dptx2_phy_pll_vco_div_clk",
-				      "edp_phy_pll_link_clk",
-				      "edp_phy_pll_vco_div_clk",
-				      "sleep_clk";
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
-- 
2.30.2