[PATCH v2 3/3] drm/mediatek: in struct mtk_hdmi, replace conn field with curr_conn ptr

Laurent Pinchart laurent.pinchart at ideasonboard.com
Tue Mar 30 00:10:19 UTC 2021


Hi Dafna,

Thank you for the patch.

On Mon, Mar 29, 2021 at 05:36:32PM +0200, Dafna Hirschfeld wrote:
> The mtk_hdmi does not support creating a bridge with a connector.
> Therefore the field 'conn' should be removed from the mtk_hdmi struct.
> It is replaced with a pointer curr_conn that points to the current
> connector which can be access through the global state.
> 
> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld at collabora.com>

The patch looks good to me, but I'd squash it with 2/3 otherwise I think
you'll break bisection. On the other hand, given that the HDMI support
is already broken... :-)

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

But you need to make sure this patch will get backported to stable along
2/3, probably by adding a fixes tag. Or squashing it with 2/3, up to
you.

> ---
>  drivers/gpu/drm/mediatek/mtk_hdmi.c | 19 ++++++++++++++-----
>  1 file changed, 14 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
> index 1eeb211b1536..0d95d2cfe3de 100644
> --- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
> @@ -153,7 +153,7 @@ struct mtk_hdmi_conf {
>  struct mtk_hdmi {
>  	struct drm_bridge bridge;
>  	struct drm_bridge *next_bridge;
> -	struct drm_connector conn;
> +	struct drm_connector *curr_conn;/* current connector (only valid when 'enabled') */
>  	struct device *dev;
>  	const struct mtk_hdmi_conf *conf;
>  	struct phy *phy;
> @@ -969,7 +969,7 @@ static int mtk_hdmi_setup_avi_infoframe(struct mtk_hdmi *hdmi,
>  	ssize_t err;
>  
>  	err = drm_hdmi_avi_infoframe_from_display_mode(&frame,
> -						       &hdmi->conn, mode);
> +						       hdmi->curr_conn, mode);
>  	if (err < 0) {
>  		dev_err(hdmi->dev,
>  			"Failed to get AVI infoframe from mode: %zd\n", err);
> @@ -1049,7 +1049,7 @@ static int mtk_hdmi_setup_vendor_specific_infoframe(struct mtk_hdmi *hdmi,
>  	ssize_t err;
>  
>  	err = drm_hdmi_vendor_infoframe_from_display_mode(&frame,
> -							  &hdmi->conn, mode);
> +							  hdmi->curr_conn, mode);
>  	if (err) {
>  		dev_err(hdmi->dev,
>  			"Failed to get vendor infoframe from mode: %zd\n", err);
> @@ -1322,6 +1322,8 @@ static void mtk_hdmi_bridge_atomic_disable(struct drm_bridge *bridge,
>  	clk_disable_unprepare(hdmi->clk[MTK_HDMI_CLK_HDMI_PIXEL]);
>  	clk_disable_unprepare(hdmi->clk[MTK_HDMI_CLK_HDMI_PLL]);
>  
> +	hdmi->curr_conn = NULL;
> +
>  	hdmi->enabled = false;
>  }
>  
> @@ -1385,8 +1387,13 @@ static void mtk_hdmi_send_infoframe(struct mtk_hdmi *hdmi,
>  static void mtk_hdmi_bridge_atomic_enable(struct drm_bridge *bridge,
>  					  struct drm_bridge_state *old_state)
>  {
> +	struct drm_atomic_state *state = old_state->base.state;
>  	struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge);
>  
> +	/* Retrieve the connector through the atomic state. */
> +	hdmi->curr_conn = drm_atomic_get_new_connector_for_encoder(state,
> +								   bridge->encoder);
> +
>  	mtk_hdmi_output_set_display_mode(hdmi, &hdmi->mode);
>  	clk_prepare_enable(hdmi->clk[MTK_HDMI_CLK_HDMI_PLL]);
>  	clk_prepare_enable(hdmi->clk[MTK_HDMI_CLK_HDMI_PIXEL]);
> @@ -1625,8 +1632,10 @@ static int mtk_hdmi_audio_get_eld(struct device *dev, void *data, uint8_t *buf,
>  {
>  	struct mtk_hdmi *hdmi = dev_get_drvdata(dev);
>  
> -	memcpy(buf, hdmi->conn.eld, min(sizeof(hdmi->conn.eld), len));
> -
> +	if (hdmi->enabled)
> +		memcpy(buf, hdmi->curr_conn->eld, min(sizeof(hdmi->curr_conn->eld), len));
> +	else
> +		memset(buf, 0, len);
>  	return 0;
>  }
>  

-- 
Regards,

Laurent Pinchart


More information about the dri-devel mailing list