[v1] drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume
Steev Klimaszewski
steev at kali.org
Tue Mar 30 18:34:59 UTC 2021
On 3/22/21 4:17 AM, Kalyan Thota wrote:
> From: Kalyan Thota <kalyant at codeaurora.org>
>
> DPU runtime resume will request for a min vote on the AXI bus as
> it is a necessary step before turning ON the AXI clock.
>
> The change does below
> 1) Move the icc path set before requesting runtime get_sync.
> 2) remove the dependency of hw catalog for min ib vote
> as it is initialized at a later point.
>
> Signed-off-by: Kalyan Thota <kalyan_t at codeaurora.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 12 +++++++-----
> 1 file changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index ed636f1..cab387f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -44,6 +44,8 @@
> #define DPU_DEBUGFS_DIR "msm_dpu"
> #define DPU_DEBUGFS_HWMASKNAME "hw_log_mask"
>
> +#define MIN_IB_BW 400000000ULL /* Min ib vote 400MB */
> +
> static int dpu_kms_hw_init(struct msm_kms *kms);
> static void _dpu_kms_mmu_destroy(struct dpu_kms *dpu_kms);
>
> @@ -932,6 +934,9 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
> DPU_DEBUG("REG_DMA is not defined");
> }
>
> + if (of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss"))
> + dpu_kms_parse_data_bus_icc_path(dpu_kms);
> +
> pm_runtime_get_sync(&dpu_kms->pdev->dev);
>
> dpu_kms->core_rev = readl_relaxed(dpu_kms->mmio + 0x0);
> @@ -1037,9 +1042,6 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
>
> dpu_vbif_init_memtypes(dpu_kms);
>
> - if (of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss"))
> - dpu_kms_parse_data_bus_icc_path(dpu_kms);
> -
> pm_runtime_put_sync(&dpu_kms->pdev->dev);
>
> return 0;
> @@ -1196,10 +1198,10 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev)
>
> ddev = dpu_kms->dev;
>
> + WARN_ON(!(dpu_kms->num_paths));
> /* Min vote of BW is required before turning on AXI clk */
> for (i = 0; i < dpu_kms->num_paths; i++)
> - icc_set_bw(dpu_kms->path[i], 0,
> - dpu_kms->catalog->perf.min_dram_ib);
> + icc_set_bw(dpu_kms->path[i], 0, Bps_to_icc(MIN_IB_BW));
>
> rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true);
> if (rc) {
With this patch now applied to 5.12-rc5, I am seeing the following when
booting the Lenovo Yoga C630 -
Mar 30 13:16:03 c630 kernel: [ 2.038491] ------------[ cut here ]------------
Mar 30 13:16:03 c630 kernel: [ 2.038495] WARNING: CPU: 3 PID: 125 at drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1196 dpu_runtime_resume+0xc0/0xf0 [msm]
Mar 30 13:16:03 c630 kernel: [ 2.038551] Modules linked in: ti_sn65dsi86 i2c_hid_of crct10dif_ce msm rtc_pm8xxx llcc_qcom ocmem drm_kms_helper i2c_qcom_geni phy_qcom_qusb2 ipa(+) qcom_common qcom_glink_smem qmi_helpers mdt_loader panel_simple drm pwm_bl
Mar 30 13:16:03 c630 kernel: [ 2.038599] CPU: 3 PID: 125 Comm: kworker/3:1 Not tainted 5.12.0-rc5 #1
Mar 30 13:16:03 c630 kernel: [ 2.038605] Hardware name: LENOVO 81JL/LNVNB161216, BIOS 9UCN33WW(V2.06) 06/ 4/2019
Mar 30 13:16:03 c630 kernel: [ 2.038610] Workqueue: events deferred_probe_work_func
Mar 30 13:16:03 c630 kernel: [ 2.038621] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
Mar 30 13:16:03 c630 kernel: [ 2.038627] pc : dpu_runtime_resume+0xc0/0xf0 [msm]
Mar 30 13:16:03 c630 kernel: [ 2.038674] lr : pm_generic_runtime_resume+0x30/0x50
Mar 30 13:16:03 c630 kernel: [ 2.038683] sp : ffff800010b9b7e0
Mar 30 13:16:03 c630 kernel: [ 2.038685] x29: ffff800010b9b7e0 x28: 0000000000000000
Mar 30 13:16:03 c630 kernel: [ 2.038692] x27: 0000000000000000 x26: ffff6b42c0c16cf4
Mar 30 13:16:03 c630 kernel: [ 2.038698] x25: 000000007965f7df x24: 0000000000000001
Mar 30 13:16:03 c630 kernel: [ 2.038705] x23: ffff6b42c0a34180 x22: ffffda2e0cc5b3d0
Mar 30 13:16:03 c630 kernel: [ 2.038712] x21: ffffda2e0b3ed6a0 x20: ffff6b42c6845000
Mar 30 13:16:03 c630 kernel: [ 2.038718] x19: ffff6b42c6851080 x18: ffffda2e0cce1220
Mar 30 13:16:03 c630 kernel: [ 2.038725] x17: ffffda2e0cce1238 x16: ffffda2e0b23e5f0
Mar 30 13:16:03 c630 kernel: [ 2.038731] x15: 0000000040000000 x14: 0000000000000000
Mar 30 13:16:03 c630 kernel: [ 2.038738] x13: ffff6b42c5f0b5b0 x12: 0000000000000000
Mar 30 13:16:03 c630 kernel: [ 2.038744] x11: 0000000000000001 x10: 0000000000003fff
Mar 30 13:16:03 c630 kernel: [ 2.038750] x9 : 0000000000000000 x8 : 0000000000000000
Mar 30 13:16:03 c630 kernel: [ 2.038755] x7 : 0000000000000000 x6 : 000000000c473b7e
Mar 30 13:16:03 c630 kernel: [ 2.038761] x5 : 00ffffffffffffff x4 : 00221806fff8f800
Mar 30 13:16:03 c630 kernel: [ 2.038768] x3 : 0000000000000018 x2 : ffffda2dc3d34320
Mar 30 13:16:03 c630 kernel: [ 2.038774] x1 : 0000000000000000 x0 : 0000000000000000
Mar 30 13:16:03 c630 kernel: [ 2.038781] Call trace:
Mar 30 13:16:03 c630 kernel: [ 2.038784] dpu_runtime_resume+0xc0/0xf0 [msm]
Mar 30 13:16:03 c630 kernel: [ 2.038831] pm_generic_runtime_resume+0x30/0x50
Mar 30 13:16:03 c630 kernel: [ 2.038836] __genpd_runtime_resume+0x30/0xb0
Mar 30 13:16:03 c630 kernel: [ 2.038842] genpd_runtime_resume+0x90/0x250
Mar 30 13:16:03 c630 kernel: [ 2.038848] __rpm_callback+0x90/0x160
Mar 30 13:16:03 c630 kernel: [ 2.038854] rpm_callback+0x24/0x84
Mar 30 13:16:03 c630 kernel: [ 2.038859] rpm_resume+0x450/0x6ec
Mar 30 13:16:03 c630 kernel: [ 2.038865] __pm_runtime_resume+0x3c/0x90
Mar 30 13:16:03 c630 kernel: [ 2.038870] dpu_kms_hw_init+0x124/0x5dc [msm]
Mar 30 13:16:03 c630 kernel: [ 2.038918] msm_drm_bind+0x468/0x594 [msm]
Mar 30 13:16:03 c630 kernel: [ 2.038965] try_to_bring_up_master+0x164/0x1d0
Mar 30 13:16:03 c630 kernel: [ 2.038973] component_master_add_with_match+0xb8/0x100
Mar 30 13:16:03 c630 kernel: [ 2.038979] msm_pdev_probe+0x260/0x300 [msm]
Mar 30 13:16:03 c630 kernel: [ 2.039026] platform_probe+0x68/0xe0
Mar 30 13:16:03 c630 kernel: [ 2.039032] really_probe+0xe4/0x4c0
Mar 30 13:16:03 c630 kernel: [ 2.039036] driver_probe_device+0x58/0xc0
Mar 30 13:16:03 c630 kernel: [ 2.039040] __device_attach_driver+0xa8/0x104
Mar 30 13:16:03 c630 kernel: [ 2.039045] bus_for_each_drv+0x78/0xd0
Mar 30 13:16:03 c630 kernel: [ 2.039051] __device_attach+0xd8/0x17c
Mar 30 13:16:03 c630 kernel: [ 2.039055] device_initial_probe+0x14/0x20
Mar 30 13:16:03 c630 kernel: [ 2.039059] bus_probe_device+0x9c/0xa4
Mar 30 13:16:03 c630 kernel: [ 2.039065] deferred_probe_work_func+0x74/0xb0
Mar 30 13:16:03 c630 kernel: [ 2.039069] process_one_work+0x1d0/0x494
Mar 30 13:16:03 c630 kernel: [ 2.039076] worker_thread+0x13c/0x470
Mar 30 13:16:03 c630 kernel: [ 2.039080] kthread+0x158/0x160
Mar 30 13:16:03 c630 kernel: [ 2.039085] ret_from_fork+0x10/0x34
Mar 30 13:16:03 c630 kernel: [ 2.039093] ---[ end trace 65a4c9cc3f59c59a ]---
Mar 30 13:16:03 c630 kernel: [ 2.039124] [drm:dpu_kms_hw_init:943] dpu hardware revision:0x40000000
More information about the dri-devel
mailing list