[PATCH v4 14/24] drm/msm/dsi: drop vco_delay setting from 7nm, 10nm, 14nm drivers

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Wed Mar 31 10:57:25 UTC 2021


These drivers do not use vco_delay variable, so drop it from all of
them.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk at codeaurora.org>
Tested-by: Stephen Boyd <swboyd at chromium.org> # on sc7180 lazor
---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 3 ---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 4 ----
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c  | 3 ---
 3 files changed, 10 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
index d81cea661f5c..91ae0f8dbd88 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
@@ -99,7 +99,6 @@ struct dsi_pll_10nm {
 	/* protects REG_DSI_10nm_PHY_CMN_CLK_CFG0 register */
 	spinlock_t postdiv_lock;
 
-	int vco_delay;
 	struct dsi_pll_config pll_configuration;
 	struct dsi_pll_regs reg_setup;
 
@@ -771,8 +770,6 @@ static int dsi_pll_10nm_init(struct msm_dsi_phy *phy)
 	pll = &pll_10nm->base;
 	pll->cfg = phy->cfg;
 
-	pll_10nm->vco_delay = 1;
-
 	ret = pll_10nm_register(pll_10nm, phy->provided_clocks->hws);
 	if (ret) {
 		DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
index 7fe7c8348b42..434d02ffa7fe 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
@@ -122,8 +122,6 @@ struct dsi_pll_14nm {
 	void __iomem *phy_cmn_mmio;
 	void __iomem *mmio;
 
-	int vco_delay;
-
 	struct dsi_pll_input in;
 	struct dsi_pll_output out;
 
@@ -1012,8 +1010,6 @@ static int dsi_pll_14nm_init(struct msm_dsi_phy *phy)
 	pll = &pll_14nm->base;
 	pll->cfg = phy->cfg;
 
-	pll_14nm->vco_delay = 1;
-
 	ret = pll_14nm_register(pll_14nm, phy->provided_clocks->hws);
 	if (ret) {
 		DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index d725ceb0b90c..321d23b3ed18 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -99,7 +99,6 @@ struct dsi_pll_7nm {
 	/* protects REG_DSI_7nm_PHY_CMN_CLK_CFG0 register */
 	spinlock_t postdiv_lock;
 
-	int vco_delay;
 	struct dsi_pll_config pll_configuration;
 	struct dsi_pll_regs reg_setup;
 
@@ -796,8 +795,6 @@ static int dsi_pll_7nm_init(struct msm_dsi_phy *phy)
 	pll = &pll_7nm->base;
 	pll->cfg = phy->cfg;
 
-	pll_7nm->vco_delay = 1;
-
 	ret = pll_7nm_register(pll_7nm, phy->provided_clocks->hws);
 	if (ret) {
 		DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
-- 
2.30.2



More information about the dri-devel mailing list