[PATCH v2 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel
Yunus Bas
y.bas at phytec.de
Wed Mar 31 18:07:56 UTC 2021
From: Stefan Riedmueller <s.riedmueller at phytec.de>
This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd panel
to DRM simple panel driver.
Signed-off-by: Stefan Riedmueller <s.riedmueller at phytec.de>
Signed-off-by: Yunus Bas <y.bas at phytec.de>
---
Changes in v2:
- Splitted dt-bindings to separate patch
---
drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 4e2dad314c79..283c17a75376 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1926,6 +1926,32 @@ static const struct panel_desc edt_et057090dhu = {
.connector_type = DRM_MODE_CONNECTOR_DPI,
};
+static const struct drm_display_mode edt_etmv570g2dhu_mode = {
+ .clock = 25175,
+ .hdisplay = 640,
+ .hsync_start = 640,
+ .hsync_end = 640 + 16,
+ .htotal = 640 + 16 + 30 + 114,
+ .vdisplay = 480,
+ .vsync_start = 480 + 10,
+ .vsync_end = 480 + 10 + 3,
+ .vtotal = 480 + 10 + 3 + 35,
+ .flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_PHSYNC,
+};
+
+static const struct panel_desc edt_etmv570g2dhu = {
+ .modes = &edt_etmv570g2dhu_mode,
+ .num_modes = 1,
+ .bpc = 6,
+ .size = {
+ .width = 115,
+ .height = 86,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+ .connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
static const struct drm_display_mode edt_etm0700g0dh6_mode = {
.clock = 33260,
.hdisplay = 800,
@@ -4226,6 +4252,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "edt,et057090dhu",
.data = &edt_et057090dhu,
+ }, {
+ .compatible = "edt,etmv570g2dhu",
+ .data = &edt_etmv570g2dhu,
}, {
.compatible = "edt,et070080dh6",
.data = &edt_etm0700g0dh6,
--
2.30.0
More information about the dri-devel
mailing list