[PATCH AUTOSEL 5.4 48/57] drm/msm/mdp5: Do not multiply vclk line count by 100

Sasha Levin sashal at kernel.org
Mon May 3 16:39:32 UTC 2021


From: Marijn Suijten <marijn.suijten at somainline.org>

[ Upstream commit 377569f82ea8228c421cef4da33e056a900b58ca ]

Neither vtotal nor drm_mode_vrefresh contain a value that is
premultiplied by 100 making the x100 variable name incorrect and
resulting in vclks_line to become 100 times larger than it is supposed
to be.  The hardware counts 100 clockticks too many before tearcheck,
leading to severe panel issues on at least the Sony Xperia lineup.

This is likely an artifact from the original MDSS DSI panel driver where
the calculation [1] corrected for a premultiplied reference framerate by
100 [2].  It does not appear that the above values were ever
premultiplied in the history of the DRM MDP5 driver.

With this change applied the value written to the SYNC_CONFIG_VSYNC
register is now identical to downstream kernels.

[1]: https://source.codeaurora.org/quic/la/kernel/msm-3.18/tree/drivers/video/msm/mdss/mdss_mdp_intf_cmd.c?h=LA.UM.8.6.c26-02400-89xx.0#n288
[2]: https://source.codeaurora.org/quic/la/kernel/msm-3.18/tree/drivers/video/msm/mdss/mdss_dsi_panel.c?h=LA.UM.8.6.c26-02400-89xx.0#n1648

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten at somainline.org>
Link: https://lore.kernel.org/r/20210406214726.131534-3-marijn.suijten@somainline.org
Signed-off-by: Rob Clark <robdclark at chromium.org>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c
index 288f18cbf62d..0425400f44db 100644
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c
@@ -41,7 +41,7 @@ static int pingpong_tearcheck_setup(struct drm_encoder *encoder,
 {
 	struct mdp5_kms *mdp5_kms = get_kms(encoder);
 	struct device *dev = encoder->dev->dev;
-	u32 total_lines_x100, vclks_line, cfg;
+	u32 total_lines, vclks_line, cfg;
 	long vsync_clk_speed;
 	struct mdp5_hw_mixer *mixer = mdp5_crtc_get_mixer(encoder->crtc);
 	int pp_id = mixer->pp;
@@ -51,8 +51,8 @@ static int pingpong_tearcheck_setup(struct drm_encoder *encoder,
 		return -EINVAL;
 	}
 
-	total_lines_x100 = mode->vtotal * drm_mode_vrefresh(mode);
-	if (!total_lines_x100) {
+	total_lines = mode->vtotal * drm_mode_vrefresh(mode);
+	if (!total_lines) {
 		DRM_DEV_ERROR(dev, "%s: vtotal(%d) or vrefresh(%d) is 0\n",
 			      __func__, mode->vtotal, drm_mode_vrefresh(mode));
 		return -EINVAL;
@@ -64,7 +64,7 @@ static int pingpong_tearcheck_setup(struct drm_encoder *encoder,
 							vsync_clk_speed);
 		return -EINVAL;
 	}
-	vclks_line = vsync_clk_speed * 100 / total_lines_x100;
+	vclks_line = vsync_clk_speed / total_lines;
 
 	cfg = MDP5_PP_SYNC_CONFIG_VSYNC_COUNTER_EN
 		| MDP5_PP_SYNC_CONFIG_VSYNC_IN_EN;
-- 
2.30.2



More information about the dri-devel mailing list