[PATCH V3 1/2] dt-bindings: drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 bindings

[Rob Herring]

On Wed, May 05, 2021 at 12:02:17PM +0200, Marek Vasut wrote:
> Add DT binding document for TI SN65DSI83 and SN65DSI84 DSI to LVDS bridge.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Douglas Anderson <dianders at chromium.org>
> Cc: Jagan Teki <jagan at amarulasolutions.com>
> Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Cc: Linus Walleij <linus.walleij at linaro.org>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Sam Ravnborg <sam at ravnborg.org>
> Cc: Stephen Boyd <swboyd at chromium.org>
> Cc: devicetree at vger.kernel.org
> To: dri-devel at lists.freedesktop.org
> ---
> V2: Add compatible string for SN65DSI84, since this is now tested on it
> V3: - Add 0x2c as valid i2c address
>     - Switch to schemas/graph.yaml
>     - Constraint data-lanes to <1>, <1 2>, <1 2 3>, <1 2 3 4> only
>     - Indent example by 4 spaces
>     - Handle dual-link LVDS with two ports and describe the second DSI
>       channel-B port as well. Based on the register defaults of DSI83
>       and DSI84, it is likely that the LVDS-channel-B and DSI-channel-B
>       hardware is present in all the chips, so just reuse port at 0 and 2
>       for DSI83, port at 0,2,3 for DSI84 and all of 0,1,2,3 for DSI85 when
>       that is supported
> ---
>  .../bindings/display/bridge/ti,sn65dsi83.yaml | 171 ++++++++++++++++++
>  1 file changed, 171 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
> new file mode 100644
> index 000000000000..4e7df92446a9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
> @@ -0,0 +1,171 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi83.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SN65DSI83 and SN65DSI84 DSI to LVDS bridge chip
> +
> +maintainers:
> +  - Marek Vasut <marex at denx.de>
> +
> +description: |
> +  Texas Instruments SN65DSI83 1x Single-link MIPI DSI
> +  to 1x Single-link LVDS
> +  https://www.ti.com/lit/gpn/sn65dsi83
> +  Texas Instruments SN65DSI84 1x Single-link MIPI DSI
> +  to 1x Dual-link or 2x Single-link LVDS
> +  https://www.ti.com/lit/gpn/sn65dsi84
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: ti,sn65dsi83
> +      - const: ti,sn65dsi84

Use 'enum' instead of oneOf+const.

> +
> +  reg:
> +    oneOf:
> +      - const: 0x2c
> +      - const: 0x2d

Ditto

> +
> +  enable-gpios:
> +    maxItems: 1
> +    description: GPIO specifier for bridge_en pin (active high).
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port at 0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Video port for MIPI DSI Channel-A input
> +
> +        properties:
> +          endpoint:
> +            $ref: /schemas/graph.yaml#/$defs/endpoint-base

This should actually be video-interfaces.yaml since you use one of the 
properties from it.

> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                description: array of physical DSI data lane indexes.
> +                minItems: 1
> +                maxItems: 4
> +                items:
> +                  - const: 1
> +                  - const: 2
> +                  - const: 3
> +                  - const: 4
> +
> +      port at 1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Video port for MIPI DSI Channel-B input
> +
> +        properties:
> +          endpoint:
> +            $ref: /schemas/graph.yaml#/$defs/endpoint-base
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                description: array of physical DSI data lane indexes.
> +                minItems: 1
> +                maxItems: 4
> +                items:
> +                  - const: 1
> +                  - const: 2
> +                  - const: 3
> +                  - const: 4
> +
> +      port at 2:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Video port for LVDS Channel-A output (panel or bridge).
> +
> +        properties:
> +          endpoint:
> +            $ref: /schemas/graph.yaml#/$defs/endpoint-base
> +            description: LVDS Channel-A output endpoint
> +            unevaluatedProperties: false

No need for 'endpoint' unless you have extra properties in it.

> +
> +      port at 3:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Video port for LVDS Channel-A output (panel or bridge).
> +
> +        properties:
> +          endpoint:
> +            $ref: /schemas/graph.yaml#/$defs/endpoint-base
> +            description: LVDS Channel-B output endpoint
> +            unevaluatedProperties: false

Ditto

> +
> +    required:
> +      - port at 0
> +      - port at 2
> +
> +required:
> +  - compatible
> +  - reg
> +  - enable-gpios
> +  - ports
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: ti,sn65dsi83
> +    then:
> +      properties:
> +        ports:
> +          properties:
> +            port at 1: false
> +            port at 3: false
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: ti,sn65dsi84
> +    then:
> +      properties:
> +        ports:
> +          properties:
> +            port at 1: false
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        bridge at 2d {
> +            compatible = "ti,sn65dsi83";
> +            reg = <0x2d>;
> +
> +            enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port at 0 {
> +                    reg = <0>;
> +
> +                    endpoint {
> +                        remote-endpoint = <&dsi0_out>;
> +                        data-lanes = <1 2 3 4>;
> +                    };
> +                };
> +
> +                port at 2 {
> +                    reg = <2>;
> +
> +                    endpoint {
> +                        remote-endpoint = <&panel_in_lvds>;
> +                    };
> +                };
> +            };
> +        };
> +    };
> -- 
> 2.30.2
>