[PATCH] dt-bindings: display: convert faraday,tve200 to YAML

[Rob Herring]

On Tue, May 11, 2021 at 04:54:48PM +0000, Corentin Labbe wrote:
> Converts display/faraday,tve200.txt to yaml.
> 
> Signed-off-by: Corentin Labbe <clabbe at baylibre.com>
> ---
>  .../bindings/display/faraday,tve200.txt       | 54 -----------
>  .../bindings/display/faraday,tve200.yaml      | 92 +++++++++++++++++++
>  2 files changed, 92 insertions(+), 54 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/faraday,tve200.txt
>  create mode 100644 Documentation/devicetree/bindings/display/faraday,tve200.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.txt b/Documentation/devicetree/bindings/display/faraday,tve200.txt
> deleted file mode 100644
> index 82e3bc0b7485..000000000000
> --- a/Documentation/devicetree/bindings/display/faraday,tve200.txt
> +++ /dev/null
> @@ -1,54 +0,0 @@
> -* Faraday TV Encoder TVE200
> -
> -Required properties:
> -
> -- compatible: must be one of:
> -	"faraday,tve200"
> -	"cortina,gemini-tvc", "faraday,tve200"
> -
> -- reg: base address and size of the control registers block
> -
> -- interrupts: contains an interrupt specifier for the interrupt
> -	line from the TVE200
> -
> -- clock-names: should contain "PCLK" for the clock line clocking the
> -	silicon and "TVE" for the 27MHz clock to the video driver
> -
> -- clocks: contains phandle and clock specifier pairs for the entries
> -	in the clock-names property. See
> -	Documentation/devicetree/bindings/clock/clock-bindings.txt
> -
> -Optional properties:
> -
> -- resets: contains the reset line phandle for the block
> -
> -Required sub-nodes:
> -
> -- port: describes LCD panel signals, following the common binding
> -	for video transmitter interfaces; see
> -	Documentation/devicetree/bindings/media/video-interfaces.txt
> -	This port should have the properties:
> -	reg = <0>;
> -	It should have one endpoint connected to a remote endpoint where
> -	the display is connected.
> -
> -Example:
> -
> -display-controller at 6a000000 {
> -	#address-cells = <1>;
> -	#size-cells = <0>;
> -	compatible = "faraday,tve200";
> -	reg = <0x6a000000 0x1000>;
> -	interrupts = <13 IRQ_TYPE_EDGE_RISING>;
> -	resets = <&syscon GEMINI_RESET_TVC>;
> -	clocks = <&syscon GEMINI_CLK_GATE_TVC>,
> -		 <&syscon GEMINI_CLK_TVC>;
> -	clock-names = "PCLK", "TVE";
> -
> -	port at 0 {
> -		reg = <0>;
> -		display_out: endpoint {
> -			remote-endpoint = <&panel_in>;
> -		};
> -	};
> -};
> diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.yaml b/Documentation/devicetree/bindings/display/faraday,tve200.yaml
> new file mode 100644
> index 000000000000..3ab51e7e72af
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/faraday,tve200.yaml
> @@ -0,0 +1,92 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/faraday,tve200.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Faraday TV Encoder TVE200
> +
> +maintainers:
> +  - Linus Walleij <linus.walleij at linaro.org>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: faraday,tve200
> +      - items:
> +          - const: cortina,gemini-tvc
> +          - const: faraday,tve200
> +
> +  reg:
> +    minItems: 1

maxItems: 1

They evaluate the same, but maxItems seems a bit more logical. 

> +
> +  interrupts:
> +    minItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: PCLK
> +      - const: TVE
> +
> +  clocks:
> +    minItems: 2
> +
> +  resets:
> +    minItems: 1
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +patternProperties:
> +  "^port@[0-9]+$":

Should be just 'port' or 'port at 0', but really the former is preferred 
when only 1. 

Use the graph binding:

$ref: /schemas/graph.yaml#/properties/port

> +    type: object
> +    description: describes LCD panel signals, following the common binding

But this is not an LCD panel...

> +      for video transmitter interfaces; see
> +      Documentation/devicetree/bindings/media/video-interfaces.txt

Drop this reference. It's now a schema, but this isn't using anything 
from it.

> +      It should have one endpoint connected to a remote endpoint where
> +      the display is connected.
> +
> +    properties:
> +      reg:
> +        const: 0
> +
> +    required:
> +      - reg
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clock-names
> +  - clocks
> +  - "#address-cells"
> +  - "#size-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/cortina,gemini-clock.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/reset/cortina,gemini-reset.h>
> +    display-controller at 6a000000 {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      compatible = "faraday,tve200";
> +      reg = <0x6a000000 0x1000>;
> +      interrupts = <13 IRQ_TYPE_EDGE_RISING>;
> +      resets = <&syscon GEMINI_RESET_TVC>;
> +      clocks = <&syscon GEMINI_CLK_GATE_TVC>,
> +               <&syscon GEMINI_CLK_TVC>;
> +      clock-names = "PCLK", "TVE";
> +
> +      port at 0 {
> +        reg = <0>;
> +        display_out: endpoint {
> +          remote-endpoint = <&panel_in>;
> +        };
> +      };
> +    };
> -- 
> 2.26.3
>