[PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel

[Stefan Riedmüller]

Hi,

gentle ping for this small series.

Regards,
Stefan

On Thu, 2021-04-15 at 11:16 +0200, Stefan Riedmueller wrote:
> The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG.
> Add the corresponding connector type and 8 bpc as default bus_format.
> 
> Signed-off-by: Stefan Riedmueller <s.riedmueller at phytec.de>
> ---
>  drivers/gpu/drm/panel/panel-simple.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c
> b/drivers/gpu/drm/panel/panel-simple.c
> index 4e2dad314c79..44583d0ed902 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -1098,6 +1098,8 @@ static const struct panel_desc auo_g104sn02 = {
>  		.width = 211,
>  		.height = 158,
>  	},
> +	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
> +	.connector_type = DRM_MODE_CONNECTOR_LVDS,
>  };
>  
>  static const struct drm_display_mode auo_g121ean01_mode = {