[PATCH 5/7] dma-buf: Add an API for exporting sync files (v11)
Christian König
christian.koenig at amd.com
Wed May 26 11:02:12 UTC 2021
Am 25.05.21 um 23:17 schrieb Jason Ekstrand:
> Modern userspace APIs like Vulkan are built on an explicit
> synchronization model. This doesn't always play nicely with the
> implicit synchronization used in the kernel and assumed by X11 and
> Wayland. The client -> compositor half of the synchronization isn't too
> bad, at least on intel, because we can control whether or not i915
> synchronizes on the buffer and whether or not it's considered written.
>
> The harder part is the compositor -> client synchronization when we get
> the buffer back from the compositor. We're required to be able to
> provide the client with a VkSemaphore and VkFence representing the point
> in time where the window system (compositor and/or display) finished
> using the buffer. With current APIs, it's very hard to do this in such
> a way that we don't get confused by the Vulkan driver's access of the
> buffer. In particular, once we tell the kernel that we're rendering to
> the buffer again, any CPU waits on the buffer or GPU dependencies will
> wait on some of the client rendering and not just the compositor.
>
> This new IOCTL solves this problem by allowing us to get a snapshot of
> the implicit synchronization state of a given dma-buf in the form of a
> sync file. It's effectively the same as a poll() or I915_GEM_WAIT only,
> instead of CPU waiting directly, it encapsulates the wait operation, at
> the current moment in time, in a sync_file so we can check/wait on it
> later. As long as the Vulkan driver does the sync_file export from the
> dma-buf before we re-introduce it for rendering, it will only contain
> fences from the compositor or display. This allows to accurately turn
> it into a VkFence or VkSemaphore without any over- synchronization.
Regarding that, why do we actually use a syncfile and not a drm_syncobj
here?
The later should be much closer to a Vulkan timeline semaphore.
Christian.
>
> v2 (Jason Ekstrand):
> - Use a wrapper dma_fence_array of all fences including the new one
> when importing an exclusive fence.
>
> v3 (Jason Ekstrand):
> - Lock around setting shared fences as well as exclusive
> - Mark SIGNAL_SYNC_FILE as a read-write ioctl.
> - Initialize ret to 0 in dma_buf_wait_sync_file
>
> v4 (Jason Ekstrand):
> - Use the new dma_resv_get_singleton helper
>
> v5 (Jason Ekstrand):
> - Rename the IOCTLs to import/export rather than wait/signal
> - Drop the WRITE flag and always get/set the exclusive fence
>
> v6 (Jason Ekstrand):
> - Drop the sync_file import as it was all-around sketchy and not nearly
> as useful as import.
> - Re-introduce READ/WRITE flag support for export
> - Rework the commit message
>
> v7 (Jason Ekstrand):
> - Require at least one sync flag
> - Fix a refcounting bug: dma_resv_get_excl() doesn't take a reference
> - Use _rcu helpers since we're accessing the dma_resv read-only
>
> v8 (Jason Ekstrand):
> - Return -ENOMEM if the sync_file_create fails
> - Predicate support on IS_ENABLED(CONFIG_SYNC_FILE)
>
> v9 (Jason Ekstrand):
> - Add documentation for the new ioctl
>
> v10 (Jason Ekstrand):
> - Go back to dma_buf_sync_file as the ioctl struct name
>
> v11 (Daniel Vetter):
> - Go back to dma_buf_export_sync_file as the ioctl struct name
> - Better kerneldoc describing what the read/write flags do
>
> Signed-off-by: Jason Ekstrand <jason at jlekstrand.net>
> Acked-by: Simon Ser <contact at emersion.fr>
> Acked-by: Christian König <christian.koenig at amd.com>
> Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
> Cc: Sumit Semwal <sumit.semwal at linaro.org>
> Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> ---
> drivers/dma-buf/dma-buf.c | 67 ++++++++++++++++++++++++++++++++++++
> include/uapi/linux/dma-buf.h | 35 +++++++++++++++++++
> 2 files changed, 102 insertions(+)
>
> diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c
> index ed6451d55d663..65a9574ee04ed 100644
> --- a/drivers/dma-buf/dma-buf.c
> +++ b/drivers/dma-buf/dma-buf.c
> @@ -20,6 +20,7 @@
> #include <linux/debugfs.h>
> #include <linux/module.h>
> #include <linux/seq_file.h>
> +#include <linux/sync_file.h>
> #include <linux/poll.h>
> #include <linux/dma-resv.h>
> #include <linux/mm.h>
> @@ -191,6 +192,9 @@ static loff_t dma_buf_llseek(struct file *file, loff_t offset, int whence)
> * Note that this only signals the completion of the respective fences, i.e. the
> * DMA transfers are complete. Cache flushing and any other necessary
> * preparations before CPU access can begin still need to happen.
> + *
> + * As an alternative to poll(), the set of fences on DMA buffer can be
> + * exported as a &sync_file using &dma_buf_sync_file_export.
> */
>
> static void dma_buf_poll_cb(struct dma_fence *fence, struct dma_fence_cb *cb)
> @@ -362,6 +366,64 @@ static long dma_buf_set_name(struct dma_buf *dmabuf, const char __user *buf)
> return ret;
> }
>
> +#if IS_ENABLED(CONFIG_SYNC_FILE)
> +static long dma_buf_export_sync_file(struct dma_buf *dmabuf,
> + void __user *user_data)
> +{
> + struct dma_buf_export_sync_file arg;
> + struct dma_fence *fence = NULL;
> + struct sync_file *sync_file;
> + int fd, ret;
> +
> + if (copy_from_user(&arg, user_data, sizeof(arg)))
> + return -EFAULT;
> +
> + if (arg.flags & ~DMA_BUF_SYNC_RW)
> + return -EINVAL;
> +
> + if ((arg.flags & DMA_BUF_SYNC_RW) == 0)
> + return -EINVAL;
> +
> + fd = get_unused_fd_flags(O_CLOEXEC);
> + if (fd < 0)
> + return fd;
> +
> + if (arg.flags & DMA_BUF_SYNC_WRITE) {
> + fence = dma_resv_get_singleton_unlocked(dmabuf->resv);
> + if (IS_ERR(fence)) {
> + ret = PTR_ERR(fence);
> + goto err_put_fd;
> + }
> + } else if (arg.flags & DMA_BUF_SYNC_READ) {
> + fence = dma_resv_get_excl_unlocked(dmabuf->resv);
> + }
> +
> + if (!fence)
> + fence = dma_fence_get_stub();
> +
> + sync_file = sync_file_create(fence);
> +
> + dma_fence_put(fence);
> +
> + if (!sync_file) {
> + ret = -ENOMEM;
> + goto err_put_fd;
> + }
> +
> + fd_install(fd, sync_file->file);
> +
> + arg.fd = fd;
> + if (copy_to_user(user_data, &arg, sizeof(arg)))
> + return -EFAULT;
> +
> + return 0;
> +
> +err_put_fd:
> + put_unused_fd(fd);
> + return ret;
> +}
> +#endif
> +
> static long dma_buf_ioctl(struct file *file,
> unsigned int cmd, unsigned long arg)
> {
> @@ -405,6 +467,11 @@ static long dma_buf_ioctl(struct file *file,
> case DMA_BUF_SET_NAME_B:
> return dma_buf_set_name(dmabuf, (const char __user *)arg);
>
> +#if IS_ENABLED(CONFIG_SYNC_FILE)
> + case DMA_BUF_IOCTL_EXPORT_SYNC_FILE:
> + return dma_buf_export_sync_file(dmabuf, (void __user *)arg);
> +#endif
> +
> default:
> return -ENOTTY;
> }
> diff --git a/include/uapi/linux/dma-buf.h b/include/uapi/linux/dma-buf.h
> index 1f67ced853b14..aeba45180b028 100644
> --- a/include/uapi/linux/dma-buf.h
> +++ b/include/uapi/linux/dma-buf.h
> @@ -67,6 +67,40 @@ struct dma_buf_sync {
>
> #define DMA_BUF_NAME_LEN 32
>
> +/**
> + * struct dma_buf_export_sync_file - Get a sync_file from a dma-buf
> + *
> + * Userspace can perform a DMA_BUF_IOCTL_EXPORT_SYNC_FILE to retrieve the
> + * current set of fences on a dma-buf file descriptor as a sync_file. CPU
> + * waits via poll() or other driver-specific mechanisms typically wait on
> + * whatever fences are on the dma-buf at the time the wait begins. This
> + * is similar except that it takes a snapshot of the current fences on the
> + * dma-buf for waiting later instead of waiting immediately. This is
> + * useful for modern graphics APIs such as Vulkan which assume an explicit
> + * synchronization model but still need to inter-operate with dma-buf.
> + */
> +struct dma_buf_export_sync_file {
> + /**
> + * @flags: Read/write flags
> + *
> + * Must be DMA_BUF_SYNC_READ, DMA_BUF_SYNC_WRITE, or both.
> + *
> + * If DMA_BUF_SYNC_READ is set and DMA_BUF_SYNC_WRITE is not set,
> + * the returned sync file waits on any writers of the dma-buf to
> + * complete. Waiting on the returned sync file is equivalent to
> + * poll() with POLLIN.
> + *
> + * If DMA_BUF_SYNC_WRITE is set, the returned sync file waits on
> + * any users of the dma-buf (read or write) to complete. Waiting
> + * on the returned sync file is equivalent to poll() with POLLOUT.
> + * If both DMA_BUF_SYNC_WRITE and DMA_BUF_SYNC_READ are set, this
> + * is equivalent to just DMA_BUF_SYNC_WRITE.
> + */
> + __u32 flags;
> + /** @fd: Returned sync file descriptor */
> + __s32 fd;
> +};
> +
> #define DMA_BUF_BASE 'b'
> #define DMA_BUF_IOCTL_SYNC _IOW(DMA_BUF_BASE, 0, struct dma_buf_sync)
>
> @@ -76,5 +110,6 @@ struct dma_buf_sync {
> #define DMA_BUF_SET_NAME _IOW(DMA_BUF_BASE, 1, const char *)
> #define DMA_BUF_SET_NAME_A _IOW(DMA_BUF_BASE, 1, u32)
> #define DMA_BUF_SET_NAME_B _IOW(DMA_BUF_BASE, 1, u64)
> +#define DMA_BUF_IOCTL_EXPORT_SYNC_FILE _IOWR(DMA_BUF_BASE, 2, struct dma_buf_export_sync_file)
>
> #endif
More information about the dri-devel
mailing list