[Freedreno] [PATCH 4/4] drm/msm/dp: Add support for SC8180x eDP

[Bjorn Andersson]

On Fri 28 May 18:40 CDT 2021, abhinavk at codeaurora.org wrote:

> On 2021-05-10 21:20, Bjorn Andersson wrote:
> > The eDP controller found in SC8180x is at large compatible with the
> > current implementation, but has its register blocks at slightly
> > different offsets.
> > 
> > Add the compatible and the new register layout.
> > 
> I am not able to completely recall the history of why in the DP bindings
> we added DP register base as a big hunk and let catalog handle the submodule
> offsets.
> 
> I guess earlier that made sense because DP sub-block offsets were fixed.
> But if we plan to re-use the DP driver for eDP as well like this series,
> then maybe it might be
> better if this comes from device tree like the earlier version was planning
> to
> 
> https://patchwork.kernel.org/project/dri-devel/patch/0101016ec6ddf446-e87ab1ce-5cbf-40a0-a0bb-cd0151cd577a-000000@us-west-2.amazonses.com/
> 
> 
> +- reg:                  Base address and length of DP hardware's memory
> mapped regions.
> +- cell-index:           Specifies the controller instance.
> +- reg-names:            A list of strings that name the list of regs.
> +			"dp_ahb" - DP controller memory region.
> +			"dp_aux" - DP AUX memory region.
> +			"dp_link" - DP link layer memory region.
> +			"dp_p0" - DP pixel clock domain memory region.
> +			"dp_phy" - DP PHY memory region.
> +			"dp_ln_tx0" - USB3 DP PHY combo TX-0 lane memory region.
> +			"dp_ln_tx1" - USB3 DP PHY combo TX-1 lane memory region.
> 
> Now there is more reason to separate the sub-module offsets like
> ahb/aux/link/p0

I like it, will rewrite the patch accordingly.

Regards,
Bjorn

> > Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
> > ---
> >  drivers/gpu/drm/msm/dp/dp_display.c |  1 +
> >  drivers/gpu/drm/msm/dp/dp_parser.c  | 28 ++++++++++++++++++++--------
> >  2 files changed, 21 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/msm/dp/dp_display.c
> > b/drivers/gpu/drm/msm/dp/dp_display.c
> > index d1319b58e901..0be03bdc882c 100644
> > --- a/drivers/gpu/drm/msm/dp/dp_display.c
> > +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> > @@ -121,6 +121,7 @@ struct dp_display_private {
> > 
> >  static const struct of_device_id dp_dt_match[] = {
> >  	{.compatible = "qcom,sc7180-dp"},
> > +	{ .compatible = "qcom,sc8180x-edp" },
> >  	{}
> >  };
> > 
> > diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c
> > b/drivers/gpu/drm/msm/dp/dp_parser.c
> > index 51ec85b4803b..47cf18bba4b2 100644
> > --- a/drivers/gpu/drm/msm/dp/dp_parser.c
> > +++ b/drivers/gpu/drm/msm/dp/dp_parser.c
> > @@ -251,6 +251,7 @@ static int dp_parser_clock(struct dp_parser *parser)
> >  static int dp_parser_parse(struct dp_parser *parser)
> >  {
> >  	struct dss_io_data *io = &parser->io.dp_controller;
> > +	struct device *dev = &parser->pdev->dev;
> >  	int rc = 0;
> > 
> >  	if (!parser) {
> > @@ -276,14 +277,25 @@ static int dp_parser_parse(struct dp_parser
> > *parser)
> >  	 */
> >  	parser->regulator_cfg = &sdm845_dp_reg_cfg;
> > 
> > -	io->ahb = io->base + 0x0;
> > -	io->ahb_len = 0x200;
> > -	io->aux = io->base + 0x200;
> > -	io->aux_len = 0x200;
> > -	io->link = io->base + 0x400;
> > -	io->link_len = 0x600;
> > -	io->p0 = io->base + 0x1000;
> > -	io->p0_len = 0x400;
> > +	if (of_device_is_compatible(dev->of_node, "qcom,sc8180x-edp")) {
> > +		io->ahb = io->base + 0x0;
> > +		io->ahb_len = 0x200;
> > +		io->aux = io->base + 0x200;
> > +		io->aux_len = 0x200;
> > +		io->link = io->base + 0x400;
> > +		io->link_len = 0x600;
> > +		io->p0 = io->base + 0xa00;
> > +		io->p0_len = 0x400;
> > +	} else {
> > +		io->ahb = io->base + 0x0;
> > +		io->ahb_len = 0x200;
> > +		io->aux = io->base + 0x200;
> > +		io->aux_len = 0x200;
> > +		io->link = io->base + 0x400;
> > +		io->link_len = 0x600;
> > +		io->p0 = io->base + 0x1000;
> > +		io->p0_len = 0x400;
> > +	}
> > 
> >  	return 0;
> >  }