[PATCH 09/12] arm64: dts: rockchip: rk356x: Add HDMI nodes

[Rob Herring]

On Wed, Nov 17, 2021 at 8:34 AM Sascha Hauer <s.hauer at pengutronix.de> wrote:
>
> Add support for the HDMI port found on RK3568.
>
> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> ---
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 65 ++++++++++++++++++++++++
>  1 file changed, 65 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> index 6ebf7c14e096a..53be61a7ce595 100644
> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> @@ -472,18 +472,36 @@ vp0: port at 0 {
>                                 #address-cells = <1>;
>                                 #size-cells = <0>;
>                                 reg = <0>;
> +
> +                               vp0_out_hdmi: endpoint at 0 {
> +                                       reg = <0>;
> +                                       remote-endpoint = <&hdmi_in_vp0>;
> +                                       status = "disabled";
> +                               };
>                         };
>
>                         vp1: port at 1 {
>                                 #address-cells = <1>;
>                                 #size-cells = <0>;
>                                 reg = <1>;
> +
> +                               vp1_out_hdmi: endpoint at 0 {
> +                                       reg = <0>;
> +                                       remote-endpoint = <&hdmi_in_vp1>;
> +                                       status = "disabled";
> +                               };
>                         };
>
>                         vp2: port at 2 {
>                                 #address-cells = <1>;
>                                 #size-cells = <0>;
>                                 reg = <2>;
> +
> +                               vp2_out_hdmi: endpoint at 0 {
> +                                       reg = <0>;
> +                                       remote-endpoint = <&hdmi_in_vp2>;
> +                                       status = "disabled";
> +                               };
>                         };
>                 };
>         };
> @@ -499,6 +517,53 @@ vop_mmu: iommu at fe043e00 {
>                 status = "disabled";
>         };
>
> +       hdmi: hdmi at fe0a0000 {
> +               compatible = "rockchip,rk3568-dw-hdmi";
> +               reg = <0x0 0xfe0a0000 0x0 0x20000>;
> +               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> +               clocks = <&cru PCLK_HDMI_HOST>,
> +                        <&cru CLK_HDMI_SFR>,
> +                        <&cru CLK_HDMI_CEC>,
> +                        <&cru HCLK_VOP>;
> +               clock-names = "iahb", "isfr", "cec", "hclk";
> +               power-domains = <&power RK3568_PD_VO>;
> +               reg-io-width = <4>;
> +               rockchip,grf = <&grf>;
> +               #sound-dai-cells = <0>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
> +               status = "disabled";
> +
> +               ports {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       hdmi_in: port at 0 {


The schema says there is only 1 'port' node. Please run schema
validation when making DT changes.

However, an HDMI bridge should also define an output port to a
connector node (or another bridge). So the fix is to allow 'port at 0'
and add an output port.

> +                               reg = <0>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               hdmi_in_vp0: endpoint at 0 {
> +                                       reg = <0>;
> +                                       remote-endpoint = <&vp0_out_hdmi>;
> +                                       status = "disabled";
> +                               };
> +
> +                               hdmi_in_vp1: endpoint at 1 {
> +                                       reg = <1>;
> +                                       remote-endpoint = <&vp1_out_hdmi>;
> +                                       status = "disabled";
> +                               };
> +
> +                               hdmi_in_vp2: endpoint at 2 {
> +                                       reg = <2>;
> +                                       remote-endpoint = <&vp2_out_hdmi>;
> +                                       status = "disabled";
> +                               };
> +                       };
> +               };
> +       };
> +
>         qos_gpu: qos at fe128000 {
>                 compatible = "rockchip,rk3568-qos", "syscon";
>                 reg = <0x0 0xfe128000 0x0 0x20>;
> --
> 2.30.2
>