[PATCH v7 2/8] drm/ingenic: Add support for JZ4780 and HDMI output
H. Nikolaus Schaller
hns at goldelico.com
Tue Nov 23 18:13:53 UTC 2021
> Am 23.11.2021 um 19:06 schrieb Paul Cercueil <paul at crapouillou.net>:
>
> Hi Nikolaus,
>
> Le mar., nov. 23 2021 at 18:46:17 +0100, H. Nikolaus Schaller <hns at goldelico.com> a écrit :
>> From: Paul Boddie <paul at boddie.org.uk>
>> Add support for the LCD controller present on JZ4780 SoCs.
>> This SoC uses 8-byte descriptors which extend the current
>> 4-byte descriptors used for other Ingenic SoCs.
>> Tested on MIPS Creator CI20 board.
>> Signed-off-by: Paul Boddie <paul at boddie.org.uk>
>> Signed-off-by: Ezequiel Garcia <ezequiel at collabora.com>
>> Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
>> ---
>> drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 55 ++++++++++++++++++++++-
>> drivers/gpu/drm/ingenic/ingenic-drm.h | 38 ++++++++++++++++
>> 2 files changed, 92 insertions(+), 1 deletion(-)
>> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> index 0bb590c3910d9..5ff97a4bbcfe5 100644
>> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> @@ -6,6 +6,7 @@
>> #include "ingenic-drm.h"
>> +#include <linux/bitfield.h>
>> #include <linux/component.h>
>> #include <linux/clk.h>
>> #include <linux/dma-mapping.h>
>> @@ -49,6 +50,11 @@ struct ingenic_dma_hwdesc {
>> u32 addr;
>> u32 id;
>> u32 cmd;
>> + /* extended hw descriptor for jz4780 */
>> + u32 offsize;
>> + u32 pagewidth;
>> + u32 cpos;
>> + u32 dessize;
>> } __aligned(16);
>> struct ingenic_dma_hwdescs {
>> @@ -60,6 +66,7 @@ struct jz_soc_info {
>> bool needs_dev_clk;
>> bool has_osd;
>> bool map_noncoherent;
>> + bool use_extended_hwdesc;
>> unsigned int max_width, max_height;
>> const u32 *formats_f0, *formats_f1;
>> unsigned int num_formats_f0, num_formats_f1;
>> @@ -446,6 +453,9 @@ static int ingenic_drm_plane_atomic_check(struct drm_plane *plane,
>> if (!crtc)
>> return 0;
>> + if (plane == &priv->f0)
>> + return -EINVAL;
>> +
>> crtc_state = drm_atomic_get_existing_crtc_state(state,
>> crtc);
>> if (WARN_ON(!crtc_state))
>> @@ -662,6 +672,33 @@ static void ingenic_drm_plane_atomic_update(struct drm_plane *plane,
>> hwdesc->cmd = JZ_LCD_CMD_EOF_IRQ | (width * height * cpp / 4);
>> hwdesc->next = dma_hwdesc_addr(priv, next_id);
>> + if (priv->soc_info->use_extended_hwdesc) {
>> + hwdesc->cmd |= JZ_LCD_CMD_FRM_ENABLE;
>> +
>> + /* Extended 8-byte descriptor */
>> + hwdesc->cpos = 0;
>> + hwdesc->offsize = 0;
>> + hwdesc->pagewidth = 0;
>> +
>> + switch (newstate->fb->format->format) {
>> + case DRM_FORMAT_XRGB1555:
>> + hwdesc->cpos |= JZ_LCD_CPOS_RGB555;
>> + fallthrough;
>> + case DRM_FORMAT_RGB565:
>> + hwdesc->cpos |= JZ_LCD_CPOS_BPP_15_16;
>> + break;
>> + case DRM_FORMAT_XRGB8888:
>> + hwdesc->cpos |= JZ_LCD_CPOS_BPP_18_24;
>> + break;
>> + }
>> + hwdesc->cpos |= (JZ_LCD_CPOS_COEFFICIENT_1 <<
>> + JZ_LCD_CPOS_COEFFICIENT_OFFSET);
>> + hwdesc->dessize =
>> + (0xff << JZ_LCD_DESSIZE_ALPHA_OFFSET) |
>> + FIELD_PREP(JZ_LCD_DESSIZE_HEIGHT_MASK, height - 1) |
>> + FIELD_PREP(JZ_LCD_DESSIZE_WIDTH_MASK, width - 1);
>> + }
>> +
>> if (drm_atomic_crtc_needs_modeset(crtc_state)) {
>> fourcc = newstate->fb->format->format;
>> @@ -693,6 +730,9 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
>> | JZ_LCD_CFG_SPL_DISABLE | JZ_LCD_CFG_REV_DISABLE;
>> }
>> + if (priv->soc_info->use_extended_hwdesc)
>> + cfg |= JZ_LCD_CFG_DESCRIPTOR_8;
>> +
>> if (mode->flags & DRM_MODE_FLAG_NHSYNC)
>> cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW;
>> if (mode->flags & DRM_MODE_FLAG_NVSYNC)
>> @@ -1064,7 +1104,7 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
>> }
>> regmap_config = ingenic_drm_regmap_config;
>> - regmap_config.max_register = res->end - res->start;
>> + regmap_config.max_register = res->end - res->start - 4;
>
> I think this is wrong :)
Oops, that is a side-effect of my patch series editing tool.
It sometimes reverts changes of a previous commit if both
affect the same file. Sorry for that and I should fix it...
I'll send v8.
BR and thanks,
Nikolaus
>
> Cheers,
> -Paul
>
>> priv->map = devm_regmap_init_mmio(dev, base,
>> ®map_config);
>> if (IS_ERR(priv->map)) {
>> @@ -1468,10 +1508,23 @@ static const struct jz_soc_info jz4770_soc_info = {
>> .num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
>> };
>> +static const struct jz_soc_info jz4780_soc_info = {
>> + .needs_dev_clk = true,
>> + .has_osd = true,
>> + .use_extended_hwdesc = true,
>> + .max_width = 4096,
>> + .max_height = 2048,
>> + .formats_f1 = jz4770_formats_f1,
>> + .num_formats_f1 = ARRAY_SIZE(jz4770_formats_f1),
>> + .formats_f0 = jz4770_formats_f0,
>> + .num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
>> +};
>> +
>> static const struct of_device_id ingenic_drm_of_match[] = {
>> { .compatible = "ingenic,jz4740-lcd", .data = &jz4740_soc_info },
>> { .compatible = "ingenic,jz4725b-lcd", .data = &jz4725b_soc_info },
>> { .compatible = "ingenic,jz4770-lcd", .data = &jz4770_soc_info },
>> + { .compatible = "ingenic,jz4780-lcd", .data = &jz4780_soc_info },
>> { /* sentinel */ },
>> };
>> MODULE_DEVICE_TABLE(of, ingenic_drm_of_match);
>> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.h b/drivers/gpu/drm/ingenic/ingenic-drm.h
>> index 22654ac1dde1c..cb1d09b625881 100644
>> --- a/drivers/gpu/drm/ingenic/ingenic-drm.h
>> +++ b/drivers/gpu/drm/ingenic/ingenic-drm.h
>> @@ -44,8 +44,11 @@
>> #define JZ_REG_LCD_XYP1 0x124
>> #define JZ_REG_LCD_SIZE0 0x128
>> #define JZ_REG_LCD_SIZE1 0x12c
>> +#define JZ_REG_LCD_PCFG 0x2c0
>> #define JZ_LCD_CFG_SLCD BIT(31)
>> +#define JZ_LCD_CFG_DESCRIPTOR_8 BIT(28)
>> +#define JZ_LCD_CFG_RECOVER_FIFO_UNDERRUN BIT(25)
>> #define JZ_LCD_CFG_PS_DISABLE BIT(23)
>> #define JZ_LCD_CFG_CLS_DISABLE BIT(22)
>> #define JZ_LCD_CFG_SPL_DISABLE BIT(21)
>> @@ -63,6 +66,7 @@
>> #define JZ_LCD_CFG_DE_ACTIVE_LOW BIT(9)
>> #define JZ_LCD_CFG_VSYNC_ACTIVE_LOW BIT(8)
>> #define JZ_LCD_CFG_18_BIT BIT(7)
>> +#define JZ_LCD_CFG_24_BIT BIT(6)
>> #define JZ_LCD_CFG_PDW (BIT(5) | BIT(4))
>> #define JZ_LCD_CFG_MODE_GENERIC_16BIT 0
>> @@ -132,6 +136,7 @@
>> #define JZ_LCD_CMD_SOF_IRQ BIT(31)
>> #define JZ_LCD_CMD_EOF_IRQ BIT(30)
>> #define JZ_LCD_CMD_ENABLE_PAL BIT(28)
>> +#define JZ_LCD_CMD_FRM_ENABLE BIT(26)
>> #define JZ_LCD_SYNC_MASK 0x3ff
>> @@ -153,6 +158,7 @@
>> #define JZ_LCD_RGBC_EVEN_BGR (0x5 << 0)
>> #define JZ_LCD_OSDC_OSDEN BIT(0)
>> +#define JZ_LCD_OSDC_ALPHAEN BIT(2)
>> #define JZ_LCD_OSDC_F0EN BIT(3)
>> #define JZ_LCD_OSDC_F1EN BIT(4)
>> @@ -176,6 +182,38 @@
>> #define JZ_LCD_SIZE01_WIDTH_LSB 0
>> #define JZ_LCD_SIZE01_HEIGHT_LSB 16
>> +#define JZ_LCD_DESSIZE_ALPHA_OFFSET 24
>> +#define JZ_LCD_DESSIZE_HEIGHT_MASK GENMASK(23, 12)
>> +#define JZ_LCD_DESSIZE_WIDTH_MASK GENMASK(11, 0)
>> +
>> +#define JZ_LCD_CPOS_BPP_15_16 (4 << 27)
>> +#define JZ_LCD_CPOS_BPP_18_24 (5 << 27)
>> +#define JZ_LCD_CPOS_BPP_30 (7 << 27)
>> +#define JZ_LCD_CPOS_RGB555 BIT(30)
>> +#define JZ_LCD_CPOS_PREMULTIPLY_LCD BIT(26)
>> +#define JZ_LCD_CPOS_COEFFICIENT_OFFSET 24
>> +#define JZ_LCD_CPOS_COEFFICIENT_0 0
>> +#define JZ_LCD_CPOS_COEFFICIENT_1 1
>> +#define JZ_LCD_CPOS_COEFFICIENT_ALPHA1 2
>> +#define JZ_LCD_CPOS_COEFFICIENT_1_ALPHA1 3
>> +
>> +#define JZ_LCD_RGBC_RGB_PADDING BIT(15)
>> +#define JZ_LCD_RGBC_RGB_PADDING_FIRST BIT(14)
>> +#define JZ_LCD_RGBC_422 BIT(8)
>> +#define JZ_LCD_RGBC_RGB_FORMAT_ENABLE BIT(7)
>> +
>> +#define JZ_LCD_PCFG_PRI_MODE BIT(31)
>> +#define JZ_LCD_PCFG_HP_BST_4 (0 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_8 (1 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_16 (2 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_32 (3 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_64 (4 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_16_CONT (5 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_DISABLE (7 << 28)
>> +#define JZ_LCD_PCFG_THRESHOLD2_OFFSET 18
>> +#define JZ_LCD_PCFG_THRESHOLD1_OFFSET 9
>> +#define JZ_LCD_PCFG_THRESHOLD0_OFFSET 0
>> +
>> struct device;
>> struct drm_plane;
>> struct drm_plane_state;
>> --
>> 2.33.0
More information about the dri-devel
mailing list