[PATCH v6 7/7] drm/mediatek: Add mt8195 DisplayPort driver
Chun-Kuang Hu
chunkuang.hu at kernel.org
Thu Nov 25 15:27:45 UTC 2021
Hi, Guillaume:
This is a big patch, so I give some comment first.
Guillaume Ranquet <granquet at baylibre.com> 於 2021年11月10日 週三 下午9:06寫道：
>
> From: Markus Schneider-Pargmann <msp at baylibre.com>
>
> This patch adds a DisplayPort driver for the Mediatek mt8195 SoC and a
> according phy driver mediatek-dp-phy.
>
> It supports both functional units on the mt8195, the embedded
> DisplayPort as well as the external DisplayPort units. It offers
> hot-plug-detection, audio up to 8 channels, and DisplayPort 1.4 with up
> to 4 lanes.
>
> The driver creates a child device for the phy. The child device will
> never exist without the parent being active. As they are sharing a
> register range, the parent passes a regmap pointer to the child so that
> both can work with the same register range. The phy driver sets device
> data that is read by the parent to get the phy device that can be used
> to control the phy properties.
>
> This driver is based on an initial version by
> Jason-JH.Lin <jason-jh.lin at mediatek.com>.
>
> Signed-off-by: Markus Schneider-Pargmann <msp at baylibre.com>
> Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
> Reported-by: kernel test robot <lkp at intel.com>
> ---
> drivers/gpu/drm/drm_edid.c | 2 +-
Separate this to another patch.
> drivers/gpu/drm/mediatek/Kconfig | 7 +
> drivers/gpu/drm/mediatek/Makefile | 2 +
> drivers/gpu/drm/mediatek/mtk_dp.c | 3094 +++++++++++++++++++++++
> drivers/gpu/drm/mediatek/mtk_dp_reg.h | 568 +++++
> drivers/gpu/drm/mediatek/mtk_dpi.c | 111 +-
Ditto.
> drivers/gpu/drm/mediatek/mtk_dpi_regs.h | 26 +
Ditto.
> drivers/gpu/drm/mediatek/mtk_drm_drv.c | 1 +
Ditto
> drivers/gpu/drm/mediatek/mtk_drm_drv.h | 1 +
Ditto
> 9 files changed, 3799 insertions(+), 13 deletions(-)
> create mode 100644 drivers/gpu/drm/mediatek/mtk_dp.c
> create mode 100644 drivers/gpu/drm/mediatek/mtk_dp_reg.h
>
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index 500279a82167a..bfd98b50ceb5b 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -5183,7 +5183,7 @@ static void drm_parse_hdmi_deep_color_info(struct drm_connector *connector,
> * modes and forbids YCRCB422 support for all video modes per
> * HDMI 1.3 spec.
> */
> - info->color_formats = DRM_COLOR_FORMAT_RGB444;
> + info->color_formats |= DRM_COLOR_FORMAT_RGB444;
>
> /* YCRCB444 is optional according to spec. */
> if (hdmi[6] & DRM_EDID_HDMI_DC_Y444) {
> diff --git a/drivers/gpu/drm/mediatek/Kconfig b/drivers/gpu/drm/mediatek/Kconfig
> index 2976d21e9a34a..029b94c716131 100644
> --- a/drivers/gpu/drm/mediatek/Kconfig
> +++ b/drivers/gpu/drm/mediatek/Kconfig
> @@ -28,3 +28,10 @@ config DRM_MEDIATEK_HDMI
> select PHY_MTK_HDMI
> help
> DRM/KMS HDMI driver for Mediatek SoCs
> +
> +config MTK_DPTX_SUPPORT
> + tristate "DRM DPTX Support for Mediatek SoCs"
> + depends on DRM_MEDIATEK
> + select PHY_MTK_DP
> + help
> + DRM/KMS Display Port driver for Mediatek SoCs.
> diff --git a/drivers/gpu/drm/mediatek/Makefile b/drivers/gpu/drm/mediatek/Makefile
> index 29098d7c8307c..d86a6406055e6 100644
> --- a/drivers/gpu/drm/mediatek/Makefile
> +++ b/drivers/gpu/drm/mediatek/Makefile
> @@ -21,3 +21,5 @@ mediatek-drm-hdmi-objs := mtk_cec.o \
> mtk_hdmi_ddc.o
>
> obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o
> +
> +obj-$(CONFIG_MTK_DPTX_SUPPORT) += mtk_dp.o
> diff --git a/drivers/gpu/drm/mediatek/mtk_dp.c b/drivers/gpu/drm/mediatek/mtk_dp.c
> new file mode 100644
> index 0000000000000..83087219d5a5e
> --- /dev/null
> +++ b/drivers/gpu/drm/mediatek/mtk_dp.c
> @@ -0,0 +1,3094 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + * Copyright (c) 2021 BayLibre
> + */
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_bridge.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_dp_helper.h>
> +#include <drm/drm_edid.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_print.h>
> +#include <drm/drm_probe_helper.h>
> +#include <linux/arm-smccc.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/errno.h>
> +#include <linux/kernel.h>
> +#include <linux/nvmem-consumer.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <sound/hdmi-codec.h>
> +#include <video/videomode.h>
> +
> +#include "mtk_dp_reg.h"
> +
> +#define MTK_DP_AUX_WAIT_REPLY_COUNT 20
> +#define MTK_DP_CHECK_SINK_CAP_TIMEOUT_COUNT 3
> +
> +#define MTK_DP_MAX_LANES 4
> +#define MTK_DP_MAX_LINK_RATE MTK_DP_LINKRATE_HBR3
> +
> +#define MTK_DP_TBC_BUF_READ_START_ADDR 0x08
> +
> +#define MTK_DP_TRAIN_RETRY_LIMIT 8
> +#define MTK_DP_TRAIN_MAX_ITERATIONS 5
> +
> +#define MTK_DP_AUX_WRITE_READ_WAIT_TIME_US 20
> +
> +#define MTK_DP_DP_VERSION_11 0x11
> +
> +enum mtk_dp_state {
> + MTK_DP_STATE_INITIAL,
> + MTK_DP_STATE_IDLE,
> + MTK_DP_STATE_PREPARE,
> + MTK_DP_STATE_NORMAL,
> +};
> +
> +enum mtk_dp_train_state {
> + MTK_DP_TRAIN_STATE_STARTUP = 0,
> + MTK_DP_TRAIN_STATE_CHECKCAP,
> + MTK_DP_TRAIN_STATE_CHECKEDID,
> + MTK_DP_TRAIN_STATE_TRAINING_PRE,
> + MTK_DP_TRAIN_STATE_TRAINING,
> + MTK_DP_TRAIN_STATE_CHECKTIMING,
> + MTK_DP_TRAIN_STATE_NORMAL,
> + MTK_DP_TRAIN_STATE_POWERSAVE,
> + MTK_DP_TRAIN_STATE_DPIDLE,
> +};
> +
> +struct mtk_dp_timings {
> + struct videomode vm;
> +
> + u16 htotal;
> + u16 vtotal;
> + u8 frame_rate;
> + u32 pix_rate_khz;
> +};
> +
> +struct mtk_dp_train_info {
> + bool tps3;
> + bool tps4;
> + bool sink_ssc;
> + bool cable_plugged_in;
> + bool cable_state_change;
> + bool cr_done;
> + bool eq_done;
> +
> + // link_rate is in multiple of 0.27Gbps
> + int link_rate;
> + int lane_count;
> +
> + int irq_status;
> + int check_cap_count;
> +};
> +
> +// Same values as used by the DP Spec for MISC0 bits 1 and 2
> +enum mtk_dp_color_format {
> + MTK_DP_COLOR_FORMAT_RGB_444 = 0,
> + MTK_DP_COLOR_FORMAT_YUV_422 = 1,
> + MTK_DP_COLOR_FORMAT_YUV_444 = 2,
> + MTK_DP_COLOR_FORMAT_YUV_420 = 3,
> + MTK_DP_COLOR_FORMAT_YONLY = 4,
> + MTK_DP_COLOR_FORMAT_RAW = 5,
> + MTK_DP_COLOR_FORMAT_RESERVED = 6,
> + MTK_DP_COLOR_FORMAT_DEFAULT = MTK_DP_COLOR_FORMAT_RGB_444,
> + MTK_DP_COLOR_FORMAT_UNKNOWN = 15,
> +};
> +
> +// Multiple of 0.27Gbps
> +enum mtk_dp_linkrate {
> + MTK_DP_LINKRATE_RBR = 0x6,
> + MTK_DP_LINKRATE_HBR = 0xA,
> + MTK_DP_LINKRATE_HBR2 = 0x14,
> + MTK_DP_LINKRATE_HBR25 = 0x19,
> + MTK_DP_LINKRATE_HBR3 = 0x1E,
> +};
> +
> +// Same values as used for DP Spec MISC0 bits 5,6,7
> +enum mtk_dp_color_depth {
> + MTK_DP_COLOR_DEPTH_6BIT = 0,
> + MTK_DP_COLOR_DEPTH_8BIT = 1,
> + MTK_DP_COLOR_DEPTH_10BIT = 2,
> + MTK_DP_COLOR_DEPTH_12BIT = 3,
> + MTK_DP_COLOR_DEPTH_16BIT = 4,
> + MTK_DP_COLOR_DEPTH_UNKNOWN = 5,
> +};
> +
> +struct mtk_dp_audio_cfg {
> + int sample_rate;
> + int word_length_bits;
> + int channels;
> +};
> +
> +struct mtk_dp_info {
> + enum mtk_dp_color_depth depth;
> + enum mtk_dp_color_format format;
> + struct mtk_dp_audio_cfg audio_caps;
> + struct mtk_dp_timings timings;
> +};
> +
> +struct dp_cal_data {
> + unsigned int glb_bias_trim;
> + unsigned int clktx_impse;
> +
> + unsigned int ln0_tx_impsel_pmos;
> + unsigned int ln0_tx_impsel_nmos;
> + unsigned int ln1_tx_impsel_pmos;
> + unsigned int ln1_tx_impsel_nmos;
> + unsigned int ln2_tx_impsel_pmos;
> + unsigned int ln2_tx_impsel_nmos;
> + unsigned int ln3_tx_impsel_pmos;
> + unsigned int ln3_tx_impsel_nmos;
> +};
> +
> +struct mtk_dp {
> + struct device *dev;
> + struct platform_device *phy_dev;
> + struct phy *phy;
> + struct dp_cal_data cal_data;
> +
> + struct drm_device *drm_dev;
> + struct drm_bridge bridge;
> + struct drm_bridge *next_bridge;
> + struct drm_dp_aux aux;
> +
> + struct mutex edid_lock;
> + struct edid *edid;
> +
> + u8 rx_cap[DP_RECEIVER_CAP_SIZE];
> +
> + struct mtk_dp_info info;
> + enum mtk_dp_state state;
> +
> + struct mtk_dp_train_info train_info;
> + enum mtk_dp_train_state train_state;
> + unsigned int input_fmt;
> +
> + struct regmap *regs;
> + struct clk *dp_tx_clk;
> +
> + bool enabled;
> + bool audio_enable;
> +
> + bool has_fec;
> + struct mutex dp_lock;
> +
> + struct mutex update_plugged_status_lock;
> +
> + hdmi_codec_plugged_cb plugged_cb;
> + struct device *codec_dev;
> + u8 connector_eld[MAX_ELD_BYTES];
> +};
> +
> +enum mtk_dp_sdp_type {
> + MTK_DP_SDP_NONE = 0x00,
> + MTK_DP_SDP_ACM = 0x01,
> + MTK_DP_SDP_ISRC = 0x02,
> + MTK_DP_SDP_AVI = 0x03,
> + MTK_DP_SDP_AUI = 0x04,
> + MTK_DP_SDP_SPD = 0x05,
> + MTK_DP_SDP_MPEG = 0x06,
> + MTK_DP_SDP_NTSC = 0x07,
> + MTK_DP_SDP_VSP = 0x08,
> + MTK_DP_SDP_VSC = 0x09,
> + MTK_DP_SDP_EXT = 0x0A,
> + MTK_DP_SDP_PPS0 = 0x0B,
> + MTK_DP_SDP_PPS1 = 0x0C,
> + MTK_DP_SDP_PPS2 = 0x0D,
> + MTK_DP_SDP_PPS3 = 0x0E,
> + MTK_DP_SDP_DRM = 0x10,
> + MTK_DP_SDP_MAX_NUM
> +};
> +
> +struct mtk_dp_sdp_packet {
> + enum mtk_dp_sdp_type type;
> + struct dp_sdp sdp;
> +};
> +
> +#define MTK_DP_IEC_CHANNEL_STATUS_LEN 5
> +union mtk_dp_audio_channel_status {
> + struct {
> + u8 rev : 1;
> + u8 is_lpcm : 1;
> + u8 copy_right : 1;
> + u8 additional_format_info : 3;
> + u8 channel_status_mode : 2;
> + u8 category_code;
> + u8 src_num : 4;
> + u8 channel_num : 4;
> + u8 sampling_freq : 4;
> + u8 clk_accuracy : 2;
> + u8 rev2 : 2;
> + u8 word_len : 4;
> + u8 original_sampling_freq : 4;
> + } iec;
> +
> + u8 buf[MTK_DP_IEC_CHANNEL_STATUS_LEN];
> +};
> +
> +static struct regmap_config mtk_dp_regmap_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> + .max_register = SEC_OFFSET + 0x90,
> + .name = "mtk-dp-registers",
> +};
> +
> +static bool mtk_dp_is_edp(struct mtk_dp *mtk_dp)
Separate edp and displayport into two patches. For example, the first
patch support edp only, and the second patch add displayport function.
> +{
> + return mtk_dp->next_bridge != NULL;
> +}
> +
[snip]
> +
> +static struct edid *mtk_dp_get_edid(struct drm_bridge *bridge,
> + struct drm_connector *connector)
> +{
> + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge);
> + bool enabled = mtk_dp->enabled;
> + struct edid *new_edid = NULL;
> +
> + if (!enabled)
> + drm_bridge_chain_pre_enable(bridge);
In mtk_hdmi_bridge_get_edid(), there does not check the power. Why in
this function need this?
Does mtk hdmi driver has a bug?
> +
> + drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
> + usleep_range(2000, 5000);
> +
> + if (mtk_dp_plug_state(mtk_dp))
> + new_edid = drm_get_edid(connector, &mtk_dp->aux.ddc);
> +
> + if (!enabled)
> + drm_bridge_chain_post_disable(bridge);
> +
> + mutex_lock(&mtk_dp->edid_lock);
> + kfree(mtk_dp->edid);
> + mtk_dp->edid = NULL;
> +
> + if (!new_edid) {
> + mutex_unlock(&mtk_dp->edid_lock);
> + return NULL;
> + }
> +
> + mtk_dp->edid = drm_edid_duplicate(new_edid);
> + mutex_unlock(&mtk_dp->edid_lock);
> +
> + return new_edid;
> +}
> +
> +static ssize_t mtk_dp_aux_transfer(struct drm_dp_aux *mtk_aux,
> + struct drm_dp_aux_msg *msg)
> +{
> + ssize_t err = -EAGAIN;
> + struct mtk_dp *mtk_dp;
> + bool is_read;
> + u8 request;
> + size_t accessed_bytes = 0;
> + int retry = 3, ret = 0;
> +
> + mtk_dp = container_of(mtk_aux, struct mtk_dp, aux);
> +
> + if (!mtk_dp->train_info.cable_plugged_in ||
> + mtk_dp->train_info.irq_status & MTK_DP_HPD_DISCONNECT) {
> + mtk_dp->train_state = MTK_DP_TRAIN_STATE_CHECKCAP;
> + err = -EAGAIN;
> + goto err;
> + }
> +
> + switch (msg->request) {
> + case DP_AUX_I2C_MOT:
> + case DP_AUX_I2C_WRITE:
> + case DP_AUX_NATIVE_WRITE:
> + case DP_AUX_I2C_WRITE_STATUS_UPDATE:
> + case DP_AUX_I2C_WRITE_STATUS_UPDATE | DP_AUX_I2C_MOT:
> + request = msg->request & ~DP_AUX_I2C_WRITE_STATUS_UPDATE;
> + is_read = false;
> + break;
> + case DP_AUX_I2C_READ:
> + case DP_AUX_NATIVE_READ:
> + case DP_AUX_I2C_READ | DP_AUX_I2C_MOT:
> + request = msg->request;
> + is_read = true;
> + break;
> + default:
> + drm_err(mtk_aux->drm_dev, "invalid aux cmd = %d\n",
> + msg->request);
> + err = -EINVAL;
> + goto err;
Directly return here.
> + }
> +
> + if (msg->size == 0) {
> + mtk_dp_aux_do_transfer(mtk_dp, is_read, request,
> + msg->address + accessed_bytes,
> + msg->buffer + accessed_bytes, 0);
> + } else {
> + while (accessed_bytes < msg->size) {
> + size_t to_access =
> + min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES,
> + msg->size - accessed_bytes);
> + retry = 3;
> + while (retry--) {
> + ret = mtk_dp_aux_do_transfer(
> + mtk_dp, is_read, request,
> + msg->address + accessed_bytes,
> + msg->buffer + accessed_bytes,
> + to_access);
> + if (ret == 0)
> + break;
> + udelay(50);
> + }
> + if (!retry && ret) {
> + drm_info(mtk_dp->drm_dev,
> + "Failed to do AUX transfer: %d\n",
> + ret);
> + break;
> + }
> + accessed_bytes += to_access;
> + }
> + }
> +err:
> + if (!ret) {
> + msg->reply = DP_AUX_NATIVE_REPLY_ACK | DP_AUX_I2C_REPLY_ACK;
> + ret = msg->size;
> + } else {
> + msg->reply = DP_AUX_NATIVE_REPLY_NACK | DP_AUX_I2C_REPLY_NACK;
> + return err;
> + }
> +
> + msg->reply = DP_AUX_NATIVE_REPLY_ACK | DP_AUX_I2C_REPLY_ACK;
> + return msg->size;
> +}
> +
> +static void mtk_dp_aux_init(struct mtk_dp *mtk_dp)
> +{
> + drm_dp_aux_init(&mtk_dp->aux);
> + mtk_dp->aux.name = "aux_mtk_dp";
> + mtk_dp->aux.transfer = mtk_dp_aux_transfer;
> +}
> +
> +static void mtk_dp_poweroff(struct mtk_dp *mtk_dp)
> +{
> + mutex_lock(&mtk_dp->dp_lock);
> +
> + mtk_dp_hwirq_enable(mtk_dp, false);
> + mtk_dp_power_disable(mtk_dp);
> + phy_exit(mtk_dp->phy);
> + clk_disable_unprepare(mtk_dp->dp_tx_clk);
> +
> + mutex_unlock(&mtk_dp->dp_lock);
> +}
> +
> +static int mtk_dp_poweron(struct mtk_dp *mtk_dp)
> +{
> + int ret = 0;
> +
> + mutex_lock(&mtk_dp->dp_lock);
> +
> + ret = clk_prepare_enable(mtk_dp->dp_tx_clk);
> + if (ret < 0) {
> + dev_err(mtk_dp->dev, "Fail to enable clock: %d\n", ret);
> + goto err;
> + }
> + ret = phy_init(mtk_dp->phy);
> + if (ret) {
> + dev_err(mtk_dp->dev, "Failed to initialize phy: %d\n", ret);
> + goto err_phy_init;
> + }
> + ret = mtk_dp_phy_configure(mtk_dp, MTK_DP_LINKRATE_RBR, 1);
> + if (ret) {
> + dev_err(mtk_dp->dev, "Failed to configure phy: %d\n", ret);
> + goto err_phy_config;
> + }
> +
> + mtk_dp_init_port(mtk_dp);
> + mtk_dp_power_enable(mtk_dp);
> + mtk_dp_hwirq_enable(mtk_dp, true);
> +
> +err_phy_config:
> + phy_exit(mtk_dp->phy);
> +err_phy_init:
> + clk_disable_unprepare(mtk_dp->dp_tx_clk);
> +err:
> + mutex_unlock(&mtk_dp->dp_lock);
> + return ret;
> +}
> +
> +static int mtk_dp_bridge_attach(struct drm_bridge *bridge,
> + enum drm_bridge_attach_flags flags)
> +{
> + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge);
> + int ret;
> +
> + if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) {
> + dev_err(mtk_dp->dev, "Driver does not provide a connector!");
> + return -EINVAL;
> + }
> +
> + ret = mtk_dp_poweron(mtk_dp);
Move the power on to mtk_dp_bridge_atomic_enable().
> + if (ret)
> + return ret;
> +
> + if (mtk_dp->next_bridge) {
> + ret = drm_bridge_attach(bridge->encoder, mtk_dp->next_bridge,
> + &mtk_dp->bridge, flags);
> + if (ret) {
> + drm_warn(mtk_dp->drm_dev,
> + "Failed to attach external bridge: %d\n", ret);
> + goto err_bridge_attach;
> + }
> + }
> +
> + mtk_dp->drm_dev = bridge->dev;
> +
> + return 0;
> +
> +err_bridge_attach:
> + mtk_dp_poweroff(mtk_dp);
> + return ret;
> +}
> +
> +static void mtk_dp_bridge_detach(struct drm_bridge *bridge)
> +{
> + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge);
> +
> + mtk_dp->drm_dev = NULL;
> +
> + mtk_dp_poweroff(mtk_dp);
> +}
> +
> +static void mtk_dp_bridge_atomic_disable(struct drm_bridge *bridge,
> + struct drm_bridge_state *old_state)
> +{
> + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge);
> +
> + mtk_dp_video_mute(mtk_dp, true);
> + mtk_dp_audio_mute(mtk_dp, true);
> + mtk_dp->state = MTK_DP_STATE_IDLE;
> + mtk_dp->train_state = MTK_DP_TRAIN_STATE_STARTUP;
> +
> + mtk_dp->enabled = false;
> + msleep(100);
> +}
> +
> +static void mtk_dp_parse_drm_mode_timings(struct mtk_dp *mtk_dp,
> + struct drm_display_mode *mode)
> +{
> + struct mtk_dp_timings *timings = &mtk_dp->info.timings;
> +
> + drm_display_mode_to_videomode(mode, &timings->vm);
> + timings->frame_rate = mode->clock * 1000 / mode->htotal / mode->vtotal;
> + timings->htotal = mode->htotal;
> + timings->vtotal = mode->vtotal;
> +}
> +
> +static void mtk_dp_bridge_atomic_enable(struct drm_bridge *bridge,
> + struct drm_bridge_state *old_state)
> +{
> + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge);
> + struct drm_connector *conn;
> + struct drm_connector_state *conn_state;
> + struct drm_crtc *crtc;
> + struct drm_crtc_state *crtc_state;
> + int ret = 0;
> + int i;
> +
> + conn = drm_atomic_get_new_connector_for_encoder(old_state->base.state,
> + bridge->encoder);
mtk_dp->conn = drm_atomic_get_new_connector_for_encoder(old_state->base.state,
bridge->encoder);
> + if (!conn) {
> + drm_err(mtk_dp->drm_dev,
> + "Can't enable bridge as connector is missing\n");
> + return;
> + }
> +
> + memcpy(mtk_dp->connector_eld, conn->eld, MAX_ELD_BYTES);
> +
> + conn_state =
> + drm_atomic_get_new_connector_state(old_state->base.state, conn);
> + if (!conn_state) {
> + drm_err(mtk_dp->drm_dev,
> + "Can't enable bridge as connector state is missing\n");
> + return;
> + }
> +
> + crtc = conn_state->crtc;
> + if (!crtc) {
> + drm_err(mtk_dp->drm_dev,
> + "Can't enable bridge as connector state doesn't have a crtc\n");
> + return;
> + }
> +
> + crtc_state = drm_atomic_get_new_crtc_state(old_state->base.state, crtc);
> + if (!crtc_state) {
> + drm_err(mtk_dp->drm_dev,
> + "Can't enable bridge as crtc state is missing\n");
> + return;
> + }
> +
> + mtk_dp_parse_drm_mode_timings(mtk_dp, &crtc_state->adjusted_mode);
Refer to mtk_hdmi_bridge_atomic_enable() for getting the mode.
> + if (!mtk_dp_parse_capabilities(mtk_dp)) {
> + drm_err(mtk_dp->drm_dev,
> + "Can't enable bridge as nothing is plugged in\n");
> + return;
> + }
> +
> + //training
Run checkpatch first.
Regards,
Chun-Kuang.
> + for (i = 0; i < 50; i++) {
> + ret = mtk_dp_train_handler(mtk_dp);
> + if (ret) {
> + drm_err(mtk_dp->drm_dev, "Train handler failed %d\n",
> + ret);
> + return;
> + }
> +
> + ret = mtk_dp_state_handler(mtk_dp);
> + if (ret) {
> + drm_err(mtk_dp->drm_dev, "State handler failed %d\n",
> + ret);
> + return;
> + }
> + }
> +
> + mtk_dp->enabled = true;
> + mtk_dp_update_plugged_status(mtk_dp);
> +}
> +
> --
> 2.32.0
>
More information about the dri-devel
mailing list