[PATCH v9 00/22] Add MediaTek SoC DRM (vdosys1) support for mt8195
Nancy.Lin
nancy.lin at mediatek.com
Tue Nov 30 03:34:57 UTC 2021
The hardware path of vdosys1 with DPTx output need to go through by several modules, such as, OVL_ADAPTOR and MERGE.
Add DRM and these modules support by the patches below:
Changes in v9:
- rebase on kernel-5.16-rc1
- rebase on vdosys0 series v13. (ref [5])
- fix ovl_adaptor sub driver is brought up unintentionally
- fix clang build test fail- duplicate ethdr/mdp_rdma init_module/cleanup_module symbol issue
Changes in v8:
- separate merge async reset to new patch.
- separate drm ovl_adaptor sub driver to new patch.
- fix reviewer comment in v7.
Changes in v7:
- rebase on vdosys0 series v12 (ref[5])
- add dma description in ethdr binding document.
- refine vdosys1 bit definition of mmsys routing table.
- separate merge modification into 3 pathces.
- separate mutex modification into 2 patches.
- add plane color coding for mdp_rdma csc.
- move mdp_rdma pm control to ovl_adaptor.
- fix reviewer comment in v6.
Changes in v6:
- rebase on kernel-5.15-rc1.
- change mbox label to gce0 for dts node of vdosys1.
- modify mmsys reset num for mt8195.
- rebase on vdosys0 series v10. (ref [5])
- use drm to bring up ovl_adaptor driver.
- move drm iommu/mutex check from kms init to drm bind.
- modify rdma binding doc location. (Documentation/devicetree/bindings/arm/)
- modify for reviewer's comment in v5.
Changes in v5:
- add mmsys reset controller reference.
Changes in v4:
- use merge common driver for merge1~4.
- refine ovl_adaptor rdma driver.
- use ovl_adaptor ddp_comp function instead of ethdr.
- modify for reviewer's comment in v3.
Changes in v3:
- modify for reviewer's comment in v2.
- add vdosys1 2 pixels align limit.
- add mixer odd offset support.
Changes in v2:
- Merge PSEUDO_OVL and ETHDR into one DRM component.
- Add mmsys config API for vdosys1 hardware setting.
- Add mmsys reset control using linux reset framework.
Signed-off-by: Nancy.Lin <nancy.lin at mediatek.com>
This series are based on the following patch:
[1] arm64: dts: Add Mediatek SoC MT8195 and evaluation board dts and Makefile
https://patchwork.kernel.org/project/linux-mediatek/patch/20210601075350.31515-2-seiya.wang@mediatek.com/
[2] arm64: dts: mt8195: add IOMMU and smi nodes
https://patchwork.kernel.org/project/linux-mediatek/patch/20210615173233.26682-15-tinghan.shen@mediatek.com/
[3] [01/24] dt-bindings: mediatek: mt8195: Add binding for MM IOMMU
https://patchwork.kernel.org/project/linux-mediatek/patch/20210630023504.18177-2-yong.wu@mediatek.com/
[4] Add gce support for mt8195
https://patchwork.kernel.org/project/linux-mediatek/list/?series=537069
[5] Add MediaTek SoC DRM (vdosys0) support for mt8195
https://patchwork.kernel.org/project/linux-mediatek/list/?series=587313
[6] [v8,1/2] dt-bindings: reset: mt8195: add toprgu reset-controller header file
https://patchwork.kernel.org/project/linux-mediatek/patch/20210806023606.16867-2-Christine.Zhu@mediatek.com/
Nancy.Lin (22):
dt-bindings: mediatek: add vdosys1 RDMA definition for mt8195
dt-bindings: mediatek: add vdosys1 MERGE property for mt8195
dt-bindings: mediatek: add ethdr definition for mt8195
dt-bindings: reset: mt8195: add vdosys1 reset control bit
soc: mediatek: add mtk-mmsys support for mt8195 vdosys1
soc: mediatek: add mtk-mmsys config API for mt8195 vdosys1
soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195
vdosys1
soc: mediatek: mmsys: modify reset controller for MT8195 vdosys1
soc: mediatek: change the mutex defines and the mutex_mod type
soc: mediatek: add mtk-mutex support for mt8195 vdosys1
drm/mediatek: add display MDP RDMA support for MT8195
drm/mediatek: add display merge advance config API for MT8195
drm/mediatek: add display merge start/stop API for cmdq support
drm/mediatek: add display merge mute/unmute support for MT8195
drm/mediatek: add display merge async reset control
drm/mediatek: add ETHDR support for MT8195
drm/mediatek: add mediatek-drm plane color encoding info
drm/mediatek: add ovl_adaptor support for MT8195
drm/mediatek: modify mediatek-drm for mt8195 multi mmsys support
drm/mediatek: add drm ovl_adaptor sub driver for MT8195
drm/mediatek: add mediatek-drm of vdosys1 support for MT8195
arm64: dts: mt8195: add display node for vdosys1
.../arm/mediatek/mediatek,mdp-rdma.yaml | 77 ++++
.../display/mediatek/mediatek,ethdr.yaml | 147 ++++++
.../display/mediatek/mediatek,merge.yaml | 4 +
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 222 +++++++++
drivers/gpu/drm/mediatek/Makefile | 5 +-
drivers/gpu/drm/mediatek/mtk_disp_drv.h | 28 ++
drivers/gpu/drm/mediatek/mtk_disp_merge.c | 89 +++-
.../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c | 436 ++++++++++++++++++
drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 38 +-
drivers/gpu/drm/mediatek/mtk_drm_crtc.h | 3 +-
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 30 +-
drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 1 +
drivers/gpu/drm/mediatek/mtk_drm_drv.c | 343 ++++++++++----
drivers/gpu/drm/mediatek/mtk_drm_drv.h | 13 +-
drivers/gpu/drm/mediatek/mtk_drm_plane.c | 1 +
drivers/gpu/drm/mediatek/mtk_drm_plane.h | 1 +
drivers/gpu/drm/mediatek/mtk_ethdr.c | 386 ++++++++++++++++
drivers/gpu/drm/mediatek/mtk_ethdr.h | 25 +
drivers/gpu/drm/mediatek/mtk_mdp_rdma.c | 315 +++++++++++++
drivers/gpu/drm/mediatek/mtk_mdp_rdma.h | 20 +
drivers/soc/mediatek/mt8195-mmsys.h | 199 ++++++++
drivers/soc/mediatek/mtk-mmsys.c | 80 +++-
drivers/soc/mediatek/mtk-mmsys.h | 12 +
drivers/soc/mediatek/mtk-mutex.c | 296 +++++++-----
include/dt-bindings/reset/mt8195-resets.h | 12 +
include/linux/soc/mediatek/mtk-mmsys.h | 22 +
26 files changed, 2562 insertions(+), 243 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mdp-rdma.yaml
create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
create mode 100644 drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
create mode 100644 drivers/gpu/drm/mediatek/mtk_ethdr.c
create mode 100644 drivers/gpu/drm/mediatek/mtk_ethdr.h
create mode 100644 drivers/gpu/drm/mediatek/mtk_mdp_rdma.c
create mode 100644 drivers/gpu/drm/mediatek/mtk_mdp_rdma.h
--
2.18.0
More information about the dri-devel
mailing list