[PATCH v16 00/40] NVIDIA Tegra power management patches for 5.17
Dmitry Osipenko
digetx at gmail.com
Tue Nov 30 23:23:07 UTC 2021
This series adds runtime PM support to Tegra drivers and enables core
voltage scaling for Tegra20/30 SoCs, resolving overheating troubles.
All patches in this series are interdependent and should go via Tegra tree
for simplicity.
Changelog:
v16: - Replaced redundant "context->client" with "client" in gr2d/3d
RPM patches, which was spotted by Michał Mirosław in v15.
- Added new patch that consolidates the RPM management of older
UAPI code path.
- Added stable tag to "submit: Add missing pm_runtime_mark_last_busy()"
patch and reordered it such that it could be backported without merge
conflicts.
v15: - Added r-b from Ulf Hansson to "soc/tegra: Enable runtime PM during
OPP state-syncing" patch and added extra sanity-check to this patch
which ensures that RPM is indeed enabled.
- Fixed double RPM-disable on unbind for drivers that used
devm_pm_runtime_enable() + pm_runtime_force_suspend().
- Added link with additional info to commit message of "regulators:
Prepare for suspend" patch.
v14: - Fixed missing runtime PM syncing on removal of drivers, which was
spotted by Ulf Hansson in v13.
- clk-device driver now resumes RPM on system suspend instead of
preparing clock which it backs. This was suggested by Ulf Hansson.
- clk-device driver now syncs power domain performance unconditionally
during driver's probe time since GENPD API allows to do this now.
It was spotted by Ulf Hansson.
- Added new "Enable runtime PM during OPP state-syncing" patch, which
allows drivers to sync state at any time. Previously drivers were
obligated to take care of enabling RPM at the "right" time.
- Moved runtime PM initialization/uninitialization of DRM drivers that
use host1x channel to host1x client init/deinit phase. I noticed that
there is UAF problem because RPM-suspend callback waits until channel
is idling and channel is already released/freed during driver's removal
phase.
- Added system suspend support to the new NVDEC DRM driver.
- Added missing pm_runtime_mark_last_busy() to DRM driver.
- Corrected VDE GENPD patch which previously made video decoder clock
always-enabled by mistake if legacy PD code path was used. It was
spotted while we were testing VDE on Tegra114 that doesn't support
GENPD yet.
- Added ack from Peter Chen to the USB patch that he gave to v13.
- Changed OPP table names in accordance to the new naming scheme
required by the recent core OPP binding.
- Added 500MHz memory OPP entry used by ASUS Transformer tablets.
v13: - Fixed compile-test error reported by build bot by reverting the
mmc/ patch to v11. The sdhci_suspend/resume_host() functions aren't
available with the disabled CONFIG_PM_SLEEP, some code needs the
ifdef.
- Added last r-b from Rob Herring for the DT patches.
- Corrected clk/ PM domain-support patch by not using the
devm_tegra_core_dev_init_opp_table_common() helper, which I
utilized in v12. The clk driver implements its own power domain
state syncing and common helper shouldn't be used. This fixes driver
probing for some clocks on some devices. It was reported by
Svyatoslav Ryhel for PLLE OPP error on T30 Asus Transformer tablet.
v12: - Added r-b from Rob Herring to the host1x binding patch.
- Added acks from Hans Verkuil to the video decoder patches.
- In the v11 changelog I forgot to mention that the clk-binding
patch was also changed with a corrected regex pattern and removed
'clocks' sub-node. This patch needs r-b or ack too.
- Added new "Rename 3d power domains" patch to match the DT schema
naming requirement. Thanks to David Heidelberg for spotting this
problem.
- Replaced #ifdef CONFIG_PM_SLEEP with maybe_unused in the MMC patch
to make code cleaner.
v11: - Added acks and r-b from Rob Herring, Mark Brown and Miquel Raynal
that were given to v8.
- Corrected order of the new memory controller reset entry in
device-trees and host1x DT binding patch, which was requested by
Rob Herring.
- Switched consumer drivers to use power domain state syncing done
by new Tegra's common OPP-initialization helper.
- Made use of new devm_pm_runtime_enable() helper that was added to
v5.15 kernel, where appropriate.
- Added "fuse: Use resource-managed helpers" patch.
- Converted Tegra20/30 clk drivers to a proper platform drivers,
which was requested by Thierry Reding.
- Removed clk-bulk API usage from the MMC patch, which was requested
by Thierry Reding.
- Changed CORE power domain name to "core" in a new patch
"Change name of core power domain".
- Misc small fixes for problems that I found since v8, like couple
typos in error code paths and restored working RPM for Tegra DRM
UAPI v1 that was removed in v8 by accident.
v9-v10: Figured out remaining GENPD API changes with Ulf Hansson and
Viresh Kumar. The OPP-sync helper that was used in v8 isn't needed
anymore because GENPD API now allows consumer drivers to
init rpm_pstate of power domains.
v8: - Added new generic dev_pm_opp_sync() helper that syncs OPP state with
hardware. All drivers changed to use it. This replaces GENPD attach_dev
callback hacks that were used in v7.
- Added new patch patch "soc/tegra: regulators: Prepare for suspend"
that fixes dying Tegra20 SoC after enabling VENC power domain during
resume from suspend. It matches to what downstream kernel does on
suspend/resume.
- After a second thought, I dropped patches which added RPM to memory
drivers since hardware is always-on and RPM not needed.
- Replaced the "dummy host1x driver" patch with new "Disable unused
host1x hardware" patch, since it's a cleaner solution.
Dmitry Osipenko (40):
soc/tegra: Enable runtime PM during OPP state-syncing
soc/tegra: Add devm_tegra_core_dev_init_opp_table_common()
soc/tegra: Don't print error message when OPPs not available
dt-bindings: clock: tegra-car: Document new clock sub-nodes
clk: tegra: Support runtime PM and power domain
dt-bindings: host1x: Document OPP and power domain properties
dt-bindings: host1x: Document Memory Client resets of Host1x, GR2D and
GR3D
gpu: host1x: Add initial runtime PM and OPP support
gpu: host1x: Add host1x_channel_stop()
drm/tegra: submit: Add missing pm_runtime_mark_last_busy()
drm/tegra: dc: Support OPP and SoC core voltage scaling
drm/tegra: hdmi: Add OPP support
drm/tegra: gr2d: Support generic power domain and runtime PM
drm/tegra: gr3d: Support generic power domain and runtime PM
drm/tegra: vic: Stop channel on suspend
drm/tegra: nvdec: Stop channel on suspend
drm/tegra: submit: Remove pm_runtime_enabled() checks
drm/tegra: Consolidate runtime PM management of older UAPI codepath
usb: chipidea: tegra: Add runtime PM and OPP support
bus: tegra-gmi: Add runtime PM and OPP support
pwm: tegra: Add runtime PM and OPP support
mmc: sdhci-tegra: Add runtime PM and OPP support
mtd: rawnand: tegra: Add runtime PM and OPP support
spi: tegra20-slink: Add OPP support
media: dt: bindings: tegra-vde: Convert to schema
media: dt: bindings: tegra-vde: Document OPP and power domain
media: staging: tegra-vde: Support generic power domain
soc/tegra: fuse: Reset hardware
soc/tegra: fuse: Use resource-managed helpers
soc/tegra: regulators: Prepare for suspend
soc/tegra: pmc: Rename 3d power domains
soc/tegra: pmc: Rename core power domain
soc/tegra: pmc: Enable core domain support for Tegra20 and Tegra30
ARM: tegra: Rename CPU and EMC OPP table device-tree nodes
ARM: tegra: Add 500MHz entry to Tegra30 memory OPP table
ARM: tegra: Add OPP tables and power domains to Tegra20 device-trees
ARM: tegra: Add OPP tables and power domains to Tegra30 device-trees
ARM: tegra: Add Memory Client resets to Tegra20 GR2D, GR3D and Host1x
ARM: tegra: Add Memory Client resets to Tegra30 GR2D, GR3D and Host1x
ARM: tegra20/30: Disable unused host1x hardware
.../bindings/clock/nvidia,tegra20-car.yaml | 37 +
.../display/tegra/nvidia,tegra20-host1x.txt | 53 +
.../bindings/media/nvidia,tegra-vde.txt | 64 -
.../bindings/media/nvidia,tegra-vde.yaml | 119 ++
arch/arm/boot/dts/tegra124-apalis-emc.dtsi | 4 +-
.../arm/boot/dts/tegra124-jetson-tk1-emc.dtsi | 4 +-
arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi | 8 +-
.../arm/boot/dts/tegra124-nyan-blaze-emc.dtsi | 8 +-
.../boot/dts/tegra124-peripherals-opp.dtsi | 140 +-
.../boot/dts/tegra20-acer-a500-picasso.dts | 5 +-
arch/arm/boot/dts/tegra20-colibri.dtsi | 5 +-
.../boot/dts/tegra20-cpu-opp-microvolt.dtsi | 82 +-
arch/arm/boot/dts/tegra20-cpu-opp.dtsi | 82 +-
arch/arm/boot/dts/tegra20-harmony.dts | 3 +-
arch/arm/boot/dts/tegra20-paz00.dts | 3 +-
.../arm/boot/dts/tegra20-peripherals-opp.dtsi | 949 +++++++++++-
arch/arm/boot/dts/tegra20-seaboard.dts | 3 +-
arch/arm/boot/dts/tegra20-tamonten.dtsi | 3 +-
arch/arm/boot/dts/tegra20-trimslice.dts | 9 +
arch/arm/boot/dts/tegra20-ventana.dts | 1 +
arch/arm/boot/dts/tegra20.dtsi | 118 +-
.../tegra30-asus-nexus7-grouper-common.dtsi | 1 +
...30-asus-nexus7-grouper-memory-timings.dtsi | 12 +-
arch/arm/boot/dts/tegra30-beaver.dts | 1 +
arch/arm/boot/dts/tegra30-cardhu.dtsi | 1 +
arch/arm/boot/dts/tegra30-colibri.dtsi | 17 +-
.../boot/dts/tegra30-cpu-opp-microvolt.dtsi | 144 +-
arch/arm/boot/dts/tegra30-cpu-opp.dtsi | 144 +-
arch/arm/boot/dts/tegra30-ouya.dts | 5 +-
.../arm/boot/dts/tegra30-peripherals-opp.dtsi | 1373 ++++++++++++++++-
arch/arm/boot/dts/tegra30.dtsi | 175 ++-
drivers/bus/tegra-gmi.c | 50 +-
drivers/clk/tegra/Makefile | 1 +
drivers/clk/tegra/clk-device.c | 199 +++
drivers/clk/tegra/clk-pll.c | 2 +-
drivers/clk/tegra/clk-super.c | 2 +-
drivers/clk/tegra/clk-tegra20.c | 77 +-
drivers/clk/tegra/clk-tegra30.c | 116 +-
drivers/clk/tegra/clk.c | 75 +-
drivers/clk/tegra/clk.h | 2 +
drivers/gpu/drm/tegra/dc.c | 79 +
drivers/gpu/drm/tegra/dc.h | 2 +
drivers/gpu/drm/tegra/drm.c | 11 +-
drivers/gpu/drm/tegra/gr2d.c | 174 ++-
drivers/gpu/drm/tegra/gr3d.c | 353 ++++-
drivers/gpu/drm/tegra/hdmi.c | 16 +-
drivers/gpu/drm/tegra/nvdec.c | 43 +-
drivers/gpu/drm/tegra/submit.c | 14 +-
drivers/gpu/drm/tegra/vic.c | 48 +-
drivers/gpu/host1x/channel.c | 8 +
drivers/gpu/host1x/debug.c | 15 +
drivers/gpu/host1x/dev.c | 150 +-
drivers/gpu/host1x/dev.h | 3 +-
drivers/gpu/host1x/hw/channel_hw.c | 44 +-
drivers/gpu/host1x/intr.c | 3 -
drivers/gpu/host1x/syncpt.c | 5 +-
drivers/mmc/host/sdhci-tegra.c | 81 +-
drivers/mtd/nand/raw/tegra_nand.c | 58 +-
drivers/pwm/pwm-tegra.c | 82 +-
drivers/soc/tegra/common.c | 29 +-
drivers/soc/tegra/fuse/fuse-tegra.c | 51 +-
drivers/soc/tegra/fuse/fuse-tegra20.c | 33 +-
drivers/soc/tegra/fuse/fuse.h | 1 +
drivers/soc/tegra/pmc.c | 14 +-
drivers/soc/tegra/regulators-tegra20.c | 99 ++
drivers/soc/tegra/regulators-tegra30.c | 122 ++
drivers/spi/spi-tegra20-slink.c | 9 +-
drivers/staging/media/tegra-vde/vde.c | 63 +-
drivers/usb/chipidea/ci_hdrc_tegra.c | 53 +-
include/linux/host1x.h | 1 +
include/soc/tegra/common.h | 15 +
71 files changed, 4930 insertions(+), 846 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt
create mode 100644 Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml
create mode 100644 drivers/clk/tegra/clk-device.c
--
2.33.1
More information about the dri-devel
mailing list