[PATCH v16 16/40] drm/tegra: nvdec: Stop channel on suspend
Dmitry Osipenko
digetx at gmail.com
Tue Nov 30 23:23:23 UTC 2021
CDMA must be stopped before hardware is suspended. Add channel stopping
to RPM suspend callback. Add system level suspend-resume callbacks.
Runtime PM initialization is moved to host1x client init phase because
RPM callback now uses host1x channel that is available only when host1x
client is registered.
Reviewed-by: Ulf Hansson <ulf.hansson at linaro.org>
Signed-off-by: Dmitry Osipenko <digetx at gmail.com>
---
drivers/gpu/drm/tegra/nvdec.c | 29 ++++++++++++++++++-----------
1 file changed, 18 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/tegra/nvdec.c b/drivers/gpu/drm/tegra/nvdec.c
index 791bf1acf5f0..15f036e09e5c 100644
--- a/drivers/gpu/drm/tegra/nvdec.c
+++ b/drivers/gpu/drm/tegra/nvdec.c
@@ -113,9 +113,13 @@ static int nvdec_init(struct host1x_client *client)
goto free_channel;
}
+ pm_runtime_enable(client->dev);
+ pm_runtime_use_autosuspend(client->dev);
+ pm_runtime_set_autosuspend_delay(client->dev, 500);
+
err = tegra_drm_register_client(tegra, drm);
if (err < 0)
- goto free_syncpt;
+ goto disable_rpm;
/*
* Inherit the DMA parameters (such as maximum segment size) from the
@@ -125,7 +129,10 @@ static int nvdec_init(struct host1x_client *client)
return 0;
-free_syncpt:
+disable_rpm:
+ pm_runtime_dont_use_autosuspend(client->dev);
+ pm_runtime_force_suspend(client->dev);
+
host1x_syncpt_put(client->syncpts[0]);
free_channel:
host1x_channel_put(nvdec->channel);
@@ -150,10 +157,15 @@ static int nvdec_exit(struct host1x_client *client)
if (err < 0)
return err;
+ pm_runtime_dont_use_autosuspend(client->dev);
+ pm_runtime_force_suspend(client->dev);
+
host1x_syncpt_put(client->syncpts[0]);
host1x_channel_put(nvdec->channel);
host1x_client_iommu_detach(client);
+ nvdec->channel = NULL;
+
if (client->group) {
dma_unmap_single(nvdec->dev, nvdec->falcon.firmware.phys,
nvdec->falcon.firmware.size, DMA_TO_DEVICE);
@@ -268,6 +280,8 @@ static __maybe_unused int nvdec_runtime_suspend(struct device *dev)
{
struct nvdec *nvdec = dev_get_drvdata(dev);
+ host1x_channel_stop(nvdec->channel);
+
clk_disable_unprepare(nvdec->clk);
return 0;
@@ -412,10 +426,6 @@ static int nvdec_probe(struct platform_device *pdev)
goto exit_falcon;
}
- pm_runtime_enable(&pdev->dev);
- pm_runtime_set_autosuspend_delay(&pdev->dev, 500);
- pm_runtime_use_autosuspend(&pdev->dev);
-
return 0;
exit_falcon:
@@ -436,11 +446,6 @@ static int nvdec_remove(struct platform_device *pdev)
return err;
}
- if (pm_runtime_enabled(&pdev->dev))
- pm_runtime_disable(&pdev->dev);
- else
- nvdec_runtime_suspend(&pdev->dev);
-
falcon_exit(&nvdec->falcon);
return 0;
@@ -448,6 +453,8 @@ static int nvdec_remove(struct platform_device *pdev)
static const struct dev_pm_ops nvdec_pm_ops = {
SET_RUNTIME_PM_OPS(nvdec_runtime_suspend, nvdec_runtime_resume, NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
};
struct platform_driver tegra_nvdec_driver = {
--
2.33.1
More information about the dri-devel
mailing list