[PATCH] drm: rcar-du: Don't create encoder for unconnected LVDS outputs

[Laurent Pinchart]

Hi Geert,

On Tue, Sep 28, 2021 at 10:55:57AM +0200, Geert Uytterhoeven wrote:
> On Mon, Aug 23, 2021 at 4:54 PM Laurent Pinchart wrote:
> > On Mon, Aug 23, 2021 at 02:25:32PM +0200, Geert Uytterhoeven wrote:
> > > On Sun, Aug 22, 2021 at 2:36 AM Laurent Pinchart wrote:
> > > > On R-Car D3 and E3, the LVDS encoders provide the pixel clock to the DU,
> > > > even when LVDS outputs are not used. For this reason, the rcar-lvds
> > > > driver probes successfully on those platforms even if no further bridge
> > > > or panel is connected to the LVDS output, in order to provide the
> > > > rcar_lvds_clk_enable() and rcar_lvds_clk_disable() functions to the DU
> > > > driver.
> > > >
> > > > If an LVDS output isn't connected, trying to create a DRM connector for
> > > > the output will fail. Fix this by skipping connector creation in that
> > > > case, and also skip creation of the DRM encoder as there's no point in
> > > > an encoder without a connector.
> > > >
> > > > Fixes: e9e056949c92 ("drm: rcar-du: lvds: Convert to DRM panel bridge helper")
> > > > Reported-by: Geert Uytterhoeven <geert at linux-m68k.org>
> > >
> > > Can you please change that to
> > > Reported-by: Geert Uytterhoeven <geert+renesas at glider.be>
> > > ?
> >
> > Sure thing.
> 
> Thanks!
> 
> > > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> > >
> > > Thanks, the scary warning on Ebisu-4D is gone, so
> > > Tested-by: Geert Uytterhoeven <geert+renesas at glider.be>
> > >
> > > Disclaimer: there are no displays connected to my Ebisu-4D.
> >
> > That's the best way to ensure the absence of display issues. It works
> > great for camera testing too, if you also remove networking and storage
> > :-)
> 
> Any chance this fix can make it upstream?
> The fix was created before the issue entered upstream in v5.15-rc1.

Pull request sent.

-- 
Regards,

Laurent Pinchart