[PATCH V4 1/2] dt-bindings: display: bridge: lvds-codec: Document LVDS data mapping select

[Laurent Pinchart]

On Tue, Oct 05, 2021 at 03:03:40AM +0300, Laurent Pinchart wrote:
> Hi Marek,
> 
> Thank you for the patch.
> 
> On Tue, Jul 27, 2021 at 06:13:56PM +0200, Marek Vasut wrote:
> > Decoder input LVDS format is a property of the decoder chip or even
> > its strapping. Add DT property data-mapping the same way lvds-panel
> > does, to define the LVDS data mapping.
> > 
> > Signed-off-by: Marek Vasut <marex at denx.de>
> > Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> > Cc: Rob Herring <robh+dt at kernel.org>
> > Cc: Sam Ravnborg <sam at ravnborg.org>
> > Cc: devicetree at vger.kernel.org
> > To: dri-devel at lists.freedesktop.org
> 
> Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

I think I have to retract this, see below :-(

> And all my apologies for the delay.
> 
> > ---
> > V2: - Use allOf
> >     - Move the data-mapping to endpoint
> > V3: - Rebase on V2 submitted a while ago, reinstate changelog
> >     - Drop the allOf and un-rebase on previous pclk patch
> > V4: - port at 1, remove $ref: /schemas/graph.yaml#/properties/port and
> >       add $ref: /schemas/graph.yaml#/$defs/port-base
> > ---
> >  .../bindings/display/bridge/lvds-codec.yaml   | 33 ++++++++++++++++++-
> >  1 file changed, 32 insertions(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
> > index 304a1367faaa7..c0400c60f272a 100644
> > --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
> > +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
> > @@ -55,11 +55,26 @@ properties:
> >            For LVDS decoders, port 0 is the LVDS input
> >  
> >        port at 1:
> > -        $ref: /schemas/graph.yaml#/properties/port
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> >          description: |
> >            For LVDS encoders, port 1 is the LVDS output
> >            For LVDS decoders, port 1 is the parallel output
> >  
> > +        properties:
> > +          endpoint:
> > +            $ref: /schemas/media/video-interfaces.yaml#
> > +            unevaluatedProperties: false
> > +
> > +            properties:
> > +              data-mapping:
> > +                enum:
> > +                  - jeida-18
> > +                  - jeida-24
> > +                  - vesa-24
> > +                description: |
> > +                  The color signals mapping order. See details in
> > +                  Documentation/devicetree/bindings/display/panel/lvds.yaml
> > +

Shouldn't this be for port 0 ? For decoders, port 1 is the parallel
side, not the LVDS side.

With this fixed, you can retain the

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> >      required:
> >        - port at 0
> >        - port at 1
> > @@ -71,6 +86,22 @@ properties:
> >  
> >    power-supply: true
> >  
> > +if:
> > +  not:
> > +    properties:
> > +      compatible:
> > +        contains:
> > +          const: lvds-decoder
> > +then:
> > +  properties:
> > +    ports:
> > +      properties:
> > +        port at 1:
> > +          properties:
> > +            endpoint:
> > +              properties:
> > +                data-mapping: false
> > +
> >  required:
> >    - compatible
> >    - ports

-- 
Regards,

Laurent Pinchart