[PATCH 04/10] backlight: qcom-wled: Validate enabled string indices in DT

Marijn Suijten marijn.suijten at somainline.org
Tue Oct 5 10:03:50 UTC 2021


On 2021-10-05 10:14:52, Daniel Thompson wrote:
> On Mon, Oct 04, 2021 at 09:27:35PM +0200, Marijn Suijten wrote:
> > The strings passed in DT may possibly cause out-of-bounds register
> > accesses and should be validated before use.
> > 
> > Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3")
> 
> The first half of this patch actually fixes patch 1 from this patch set.
> It would be better to move that code there.

It only helps guarding against a maximum of 3 leds for WLED3, while
using string_len instead of an unintentional sizeof(u32) (resulting in
a fixed size of 4) is a different issue requiring a separate patch to
fix.

Would it help to reorder this patch before 1/10, and mention in patch
1/10 (then 2/10) that, besides properly using string_len instead of
hardcoded 4 (which causes wrong reads from DT on top of this), it relies
on the previous patch to prevent against an array longer than 3 for
WLED3?

- Marijn

> Daniel.
> 
> 
> > Signed-off-by: Marijn Suijten <marijn.suijten at somainline.org>
> > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at somainline.org>
> > ---
> >  drivers/video/backlight/qcom-wled.c | 14 ++++++++++++++
> >  1 file changed, 14 insertions(+)
> > 
> > diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
> > index 29910e603c42..27e8949c7922 100644
> > --- a/drivers/video/backlight/qcom-wled.c
> > +++ b/drivers/video/backlight/qcom-wled.c
> > @@ -1526,6 +1526,12 @@ static int wled_configure(struct wled *wled)
> >  						     "qcom,enabled-strings",
> >  						     sizeof(u32));
> >  	if (string_len > 0) {
> > +		if (string_len > wled->max_string_count) {
> > +			dev_err(dev, "Cannot have more than %d strings\n",
> > +				wled->max_string_count);
> > +			return -EINVAL;
> > +		}
> > +
> >  		rc = of_property_read_u32_array(dev->of_node,
> >  						"qcom,enabled-strings",
> >  						wled->cfg.enabled_strings,
> > @@ -1537,6 +1543,14 @@ static int wled_configure(struct wled *wled)
> >  			return -EINVAL;
> >  		}
> >  
> > +		for (i = 0; i < string_len; ++i) {
> > +			if (wled->cfg.enabled_strings[i] >= wled->max_string_count) {
> > +				dev_err(dev, "qcom,enabled-strings index %d at %d is out of bounds\n",
> > +					wled->cfg.enabled_strings[i], i);
> > +				return -EINVAL;
> > +			}
> > +		}
> > +
> >  		cfg->num_strings = string_len;
> >  	}
> >  
> > -- 
> > 2.33.0
> > 


More information about the dri-devel mailing list