[PATCH v5 5/7] MIPS: DTS: jz4780: Account for Synopsys HDMI driver and LCD controllers

[Paul Cercueil]

Hi Paul,

Le mar., oct. 5 2021 at 23:44:12 +0200, Paul Boddie 
<paul at boddie.org.uk> a écrit :
> On Tuesday, 5 October 2021 22:50:12 CEST Paul Cercueil wrote:
>>  Hi Nikolaus & Paul,
>> 
>>  Le mar., oct. 5 2021 at 14:29:17 +0200, H. Nikolaus Schaller
> <hns at goldelico.com> a écrit :
>>  >
>>  > diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi
>>  > b/arch/mips/boot/dts/ingenic/jz4780.dtsi
>>  > index 9e34f433b9b5..c3c18a59c377 100644
>>  > --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
>>  > +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
>>  > @@ -424,6 +424,51 @@ i2c4: i2c at 10054000 {
>>  >
>>  >  		status = "disabled";
>>  >
>>  >  	};
>>  >
>>  > +	hdmi: hdmi at 10180000 {
>>  > +		compatible = "ingenic,jz4780-dw-hdmi";
>>  > +		reg = <0x10180000 0x8000>;
>>  > +		reg-io-width = <4>;
>>  > +
>>  > +		clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
>>  > +		clock-names = "iahb", "isfr";
>>  > +
>>  > +		assigned-clocks = <&cgu JZ4780_CLK_HDMI>;
>>  > +		assigned-clock-rates = <27000000>;
>> 
>>  Any reason why this is set to 27 MHz? Is it even required? Because 
>> with
>>  the current ci20.dts, it won't be clocked at anything but 48 MHz.
> 
> EXCLK will be 48MHz, but the aim is to set the HDMI peripheral clock 
> to 27MHz,
> which is supposedly required. I vaguely recall a conversation about 
> whether we
> were doing this right, but I don't recall any conclusion.

But right now your HDMI clock is 48 MHz and HDMI works.

>>  > +
>>  > +		interrupt-parent = <&intc>;
>>  > +		interrupts = <3>;
>>  > +
>>  > +		/* ddc-i2c-bus = <&i2c4>; */
>>  > +
>>  > +		status = "disabled";
>>  > +	};
>>  > +
>>  > +	lcdc0: lcdc0 at 13050000 {
>>  > +		compatible = "ingenic,jz4780-lcd";
>>  > +		reg = <0x13050000 0x1800>;
>>  > +
>>  > +		clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD0PIXCLK>;
>>  > +		clock-names = "lcd", "lcd_pclk";
>>  > +
>>  > +		interrupt-parent = <&intc>;
>>  > +		interrupts = <31>;
>>  > +
>>  > +		status = "disabled";
>> 
>>  I think you can keep lcdc0 enabled by default (not lcdc1 though), 
>> since
>>  it is highly likely that you'd want that.
> 
> As far as I know, the clock gating for the LCD controllers acts like 
> a series
> circuit, meaning that they both need to be enabled. Some testing 
> seemed to
> confirm this. Indeed, I seem to remember only enabling one clock and 
> not
> getting any output until I figured this weird arrangement out.

I'm not talking about clocks though, but about LCDC0 and LCDC1.

Cheers,
-Paul