[PATCH] drm/msm/dp: Shorten SETUP timeout

[khsieh at codeaurora.org]

On 2021-10-05 15:36, Stephen Boyd wrote:
> Quoting Bjorn Andersson (2021-10-05 14:40:38)
>> On Tue 05 Oct 11:45 PDT 2021, Stephen Boyd wrote:
>> 
>> > Quoting Bjorn Andersson (2021-10-04 19:37:50)
>> > > Found in the middle of a patch from Sankeerth was the reduction of the
>> > > INIT_SETUP timeout from 10s to 100ms. Upon INIT_SETUP timeout the host
>> > > is initalized and HPD interrupt start to be serviced, so in the case of
>> > > eDP this reduction improves the user experience dramatically - i.e.
>> > > removes 9.9s of bland screen time at boot.
>> > >
>> > > Suggested-by: Sankeerth Billakanti <sbillaka at codeaurora.org>
>> > > Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
>> > > ---
>> >
>> > Any Fixes tag? BTW, the delay design is pretty convoluted. I had to go
>> > re-read the code a couple times to understand that it's waiting 100ms
>> > times the 'delay' number. Whaaaaat?
>> >
>> 
>> I assume you're happy with the current 10s delay on the current
>> devices, so I don't think we should push for this to be backported.
>> I have no need for it to be backported on my side at least.
>> 
> 
> Sure. Fixes tag != backported to stable trees but it is close.
> 
>> > Reviewed-by: Stephen Boyd <swboyd at chromium.org>
>> 
   dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 1); <== to 100ms

This patch will prevent usb3 from working due to dp driver initialize 
phy earlier than usb3 which cause timeout error at power up usb3 phy 
when both edp and dp are enabled.
I had prepared a patch (drm/msm/dp: do not initialize combo phy until 
plugin interrupt) to fix this problem.
Unfortunately, my patch is depend on Bjorn's patch (PATCH v3 3/5] 
drm/msm/dp: Support up to 3 DP controllers).
I will submit my patch for review once Bjorn's patches merged in.
Therefore I would think this patch should go after both Bjorn's patches 
and my patch.