[PATCH v1 2/2] drm/tegra: dc: rgb: Allow changing PLLD rate on Tegra30+

[Thierry Reding]

On Thu, Sep 30, 2021 at 01:28:05AM +0300, Dmitry Osipenko wrote:
> Asus Transformer TF700T is a Tegra30 tablet device which uses RGB->DSI
> bridge that requires a precise clock rate in order to operate properly.
> Tegra30 has a dedicated PLL for each display controller, hence the PLL
> rate can be changed freely. Allow PLL rate changes on Tegra30+ for RGB
> output. Configure the clock rate before display controller is enabled
> since DC itself may be running off this PLL and it's not okay to change
> the rate of the active PLL that doesn't support dynamic frequency
> switching since hardware will hang.
> 
> Tested-by: Maxim Schwalm <maxim.schwalm at gmail.com> #TF700T
> Signed-off-by: Dmitry Osipenko <digetx at gmail.com>
> ---
>  drivers/gpu/drm/tegra/dc.c  | 27 ++++++++++++--------
>  drivers/gpu/drm/tegra/dc.h  |  1 +
>  drivers/gpu/drm/tegra/rgb.c | 49 +++++++++++++++++++++++++++++++++++--
>  3 files changed, 65 insertions(+), 12 deletions(-)

This seems overly complicated. I especially don't like the way how
clocks are looked up with clk_get_sys() and then used in the comparison.
Could this not be achieved by using assigned-clocks and friends
properties in DT?

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20211006/0bd0848e/attachment.sig>