572994bf18ff prevents system boot
Thomas Zimmermann
tzimmermann at suse.de
Fri Oct 8 08:49:17 UTC 2021
Hi
Am 04.10.21 um 16:11 schrieb Chuck Lever III:
>
>
>> On Oct 4, 2021, at 10:07 AM, Thomas Zimmermann <tzimmermann at suse.de> wrote:
>>
>> Hi
>>
>> Am 04.10.21 um 15:34 schrieb Chuck Lever III:
>>>> On Oct 4, 2021, at 3:07 AM, Thomas Zimmermann <tzimmermann at suse.de> wrote:
>>>>
>>>> (cc: ainux.wang at gmail.com)
>>>>
>>>> Hi
>>>>
>>>> Am 03.10.21 um 20:09 schrieb Chuck Lever III:
>>>>> Hi-
>>>>> After updating one of my test systems to v5.15-rc, I found that it
>>>>> becomes unresponsive during the later part of the boot process. A
>>>>> power-on reset is necessary to recover.
>>>>> I bisected to this commit:
>>>>> 572994bf18ff ("drm/ast: Zero is missing in detect function")
>>>>
>>>> You don't have a monitor connected, I guess?
>>> Correct, my lab systems use IPMI and a browser-attached console.
>>>> In that case, we now trigger the helpers that poll for connected monitors. However, the overhead seems rather extreme.
>>>>
>>>> I'll have to try to reproduce this, or otherwise we can revert the commit.
>>> It's strange, only that system in my lab seems to have a problem.
>>> The others work fine.
>>> Thanks for having a look!
>>
>> Is it a HW or FW problem? Maybe a different revision?
>
> It's possible. I don't know how to further diagnose the issue,
> though. Any guidance appreciated!
v5.15-rc3 works well on my test machine.
For getting the firmware revisions, run
sudo dmidecode
on the machine. It will print a long list of devices with related
information. Running
sudo lspci -v
will give information about the PCI devices. There's an entry for the
VGA device somewhere. Maybe you can find some difference between the
different systems
If you think the machine got stuck, try to plug-in the VGA cable during
the boot and see if it makes the machine come up.
Best regards
Thomas
>
>
>> I'm asking because the problematic commit does the correct thing. If there is no VGA cable connected, the driver should poll until it detects one. The overhead should be minimal.
>>
>> But I'll try to reproduce anyway.
>>
>> Best regards
>> Thomas
>>
>>>> Best regards
>>>> Thomas
>>>>
>>>>> Checking out v5.15-rc3 and reverting this commit enables the system
>>>>> to boot again.
>>>>> 0b:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 30) (prog-if 00 [VGA controller])
>>>>> DeviceName: ASPEED Video AST2400
>>>>> Subsystem: Super Micro Computer Inc X10SRL-F
>>>>> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>>> Interrupt: pin A routed to IRQ 18
>>>>> Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
>>>>> Region 1: Memory at fb000000 (32-bit, non-prefetchable) [size=128K]
>>>>> Region 2: I/O ports at c000 [size=128]
>>>>> Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
>>>>> Capabilities: [40] Power Management version 3
>>>>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>>>> Capabilities: [50] MSI: Enable- Count=1/4 Maskable- 64bit+
>>>>> Address: 0000000000000000 Data: 0000
>>>>> Kernel driver in use: ast
>>>>> Kernel modules: ast
>>>>> --
>>>>> Chuck Lever
>>>>
>>>> --
>>>> Thomas Zimmermann
>>>> Graphics Driver Developer
>>>> SUSE Software Solutions Germany GmbH
>>>> Maxfeldstr. 5, 90409 Nürnberg, Germany
>>>> (HRB 36809, AG Nürnberg)
>>>> Geschäftsführer: Felix Imendörffer
>>> --
>>> Chuck Lever
>>
>> --
>> Thomas Zimmermann
>> Graphics Driver Developer
>> SUSE Software Solutions Germany GmbH
>> Maxfeldstr. 5, 90409 Nürnberg, Germany
>> (HRB 36809, AG Nürnberg)
>> Geschäftsführer: Felix Imendörffer
>
> --
> Chuck Lever
>
>
>
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_signature
Type: application/pgp-signature
Size: 840 bytes
Desc: OpenPGP digital signature
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20211008/35f4e9bb/attachment-0001.sig>
More information about the dri-devel
mailing list