[PATCH v3 2/2] drm/panel: Add support for Sharp LS060T1SX01 panel

[Sam Ravnborg]

Hi Dmityry,

On Sun, Sep 26, 2021 at 03:10:05AM +0300, Dmitry Baryshkov wrote:
> Add driver to support Sharp LS06T1SX01 FullHD panel. The panel uses
> nt35695 driver IC. For example this LCD module can be found in the
> kwaek.ca Dragonboard Display Adapter Bundle.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>

The driver looks fine. It would have been nicer could you have used
regulator_bulk - but I guess timing constraints prevents that - right?

Please address the following checkpatch warnings:

-:181: WARNING:MSLEEP: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.rst
#181: FILE: drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c:129:
+	msleep(1);

-:187: WARNING:MSLEEP: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.rst
#187: FILE: drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c:135:
+	msleep(10);

-:193: WARNING:MSLEEP: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.rst
#193: FILE: drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c:141:
+	msleep(10);

-:210: WARNING:MSLEEP: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.rst
#210: FILE: drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c:158:
+	msleep(10);

-:241: WARNING:MSLEEP: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.rst
#241: FILE: drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c:189:
+	msleep(10);


I expect patches to be checkpatch --strict clean - or it is mentioned in
the changelog otherwise.

	Sam