[PATCH] dt-bindings: display/bridge: tc358764: Convert to YAML binding

[Sam Ravnborg]

Hi AngeloGioacchino,

On Wed, Oct 06, 2021 at 03:51:50PM +0200, AngeloGioacchino Del Regno wrote:
> Convert the Toshiba TC358764 txt documentation to YAML.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>

Thanks for all these conversions to DT-schema.

It would be very good if the changelog could document the warnings they
triggers when they are used to check the existing dts files.
This is a good way to document that the warnings are expected.

While waiting for Rob to review, here is one small nit. See inline
comment below.

My personal preference is to use 4 spaces for indent in the examples.
But two is perfectly fine and there is today no rule for it.

When you are resending these, then it would be nice with a cover letter
and all patches in one series. You can then use the cover letter both to
tell on a higher level what was changed since v1 and to give a status on the
conversion effort. I hope you have converted all bridge DT-schemas.

	Sam

> ---
>  .../display/bridge/toshiba,tc358764.txt       | 35 -------
>  .../display/bridge/toshiba,tc358764.yaml      | 94 +++++++++++++++++++
>  2 files changed, 94 insertions(+), 35 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt
> deleted file mode 100644
> index 8f9abf28a8fa..000000000000
> --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt
> +++ /dev/null
> @@ -1,35 +0,0 @@
> -TC358764 MIPI-DSI to LVDS panel bridge
> -
> -Required properties:
> -  - compatible: "toshiba,tc358764"
> -  - reg: the virtual channel number of a DSI peripheral
> -  - vddc-supply: core voltage supply, 1.2V
> -  - vddio-supply: I/O voltage supply, 1.8V or 3.3V
> -  - vddlvds-supply: LVDS1/2 voltage supply, 3.3V
> -  - reset-gpios: a GPIO spec for the reset pin
> -
> -The device node can contain following 'port' child nodes,
> -according to the OF graph bindings defined in [1]:
> -  0: DSI Input, not required, if the bridge is DSI controlled
> -  1: LVDS Output, mandatory
> -
> -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
> -
> -Example:
> -
> -	bridge at 0 {
> -		reg = <0>;
> -		compatible = "toshiba,tc358764";
> -		vddc-supply = <&vcc_1v2_reg>;
> -		vddio-supply = <&vcc_1v8_reg>;
> -		vddlvds-supply = <&vcc_3v3_reg>;
> -		reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -		port at 1 {
> -			reg = <1>;
> -			lvds_ep: endpoint {
> -				remote-endpoint = <&panel_ep>;
> -			};
> -		};
> -	};
> diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml
> new file mode 100644
> index 000000000000..267a870b6b0b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml
> @@ -0,0 +1,94 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358764.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Toshiba TC358764 MIPI-DSI to LVDS bridge
> +
> +maintainers:
> +  - Andrzej Hajda <a.hajda at samsung.com>
> +
> +description: |
> +  The TC358764 is bridge device which converts MIPI DSI or MIPI DPI to DP/eDP.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - toshiba,tc358764
> +
> +  reg:
> +    description: Virtual channel number of a DSI peripheral
> +    maxItems: 1
> +
> +  reset-gpios:
> +    description: GPIO connected to the reset pin.
> +    maxItems: 1
> +
> +  vddc-supply:
> +    description: Core voltage supply, 1.2V
> +
> +  vddio-supply:
> +    description: I/O voltage supply, 1.8V or 3.3V
> +
> +  vddlvds-supply:
> +    description: LVDS1/2 voltage supply, 3.3V
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port at 0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Video port for MIPI DSI input, if the bridge DSI controlled
Fix: ..., if the bridge is DSI controlled

> +
> +      port at 1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Video port for LVDS output (panel or connector).
> +
> +    required:
> +      - port at 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - vddc-supply
> +  - vddio-supply
> +  - vddlvds-supply
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c1 {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      bridge at 0 {
> +        compatible = "toshiba,tc358764";
> +        reg = <0>;
> +        vddc-supply = <&vcc_1v2_reg>;
> +        vddio-supply = <&vcc_1v8_reg>;
> +        vddlvds-supply = <&vcc_3v3_reg>;
> +        reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
> +
> +        ports {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          port at 1 {
> +            reg = <1>;
> +            lvds_ep: endpoint {
> +              remote-endpoint = <&panel_ep>;
> +            };
> +          };
> +        };
> +      };
> +    };
> +
> +...
> -- 
> 2.33.0