[PATCH] drm/bridge: Ignore -EPROBE_DEFER when bridge attach fails

[Guido Günther]

Hi,
On Tue, Oct 12, 2021 at 10:47:14PM +0200, Guido Günther wrote:
> Hi Laurent,
> On Tue, Oct 12, 2021 at 11:17:07PM +0300, Laurent Pinchart wrote:
> > Hi Guido,
> > 
> > Thank you for the patch.
> > 
> > On Tue, Oct 12, 2021 at 09:58:58PM +0200, Guido Günther wrote:
> > > Otherwise logs are filled with
> > > 
> > >   [drm:drm_bridge_attach] *ERROR* failed to attach bridge /soc at 0/bus at 30800000/mipi-dsi at 30a0 0000 to encoder None-34: -517
> > > 
> > > when the bridge isn't ready yet.
> > > 
> > > Fixes: fb8d617f8fd6 ("drm/bridge: Centralize error message when bridge attach fails")
> > > Signed-off-by: Guido Günther <agx at sigxcpu.org>
> > > ---
> > >  drivers/gpu/drm/drm_bridge.c | 11 ++++++-----
> > >  1 file changed, 6 insertions(+), 5 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
> > > index a8ed66751c2d..f0508e85ae98 100644
> > > --- a/drivers/gpu/drm/drm_bridge.c
> > > +++ b/drivers/gpu/drm/drm_bridge.c
> > > @@ -227,14 +227,15 @@ int drm_bridge_attach(struct drm_encoder *encoder, struct drm_bridge *bridge,
> > >  	bridge->encoder = NULL;
> > >  	list_del(&bridge->chain_node);
> > >  
> > > +	if (ret != -EPROBE_DEFER) {
> > >  #ifdef CONFIG_OF
> > > -	DRM_ERROR("failed to attach bridge %pOF to encoder %s: %d\n",
> > > -		  bridge->of_node, encoder->name, ret);
> > > +		DRM_ERROR("failed to attach bridge %pOF to encoder %s: %d\n",
> > > +			  bridge->of_node, encoder->name, ret);
> > >  #else
> > > -	DRM_ERROR("failed to attach bridge to encoder %s: %d\n",
> > > -		  encoder->name, ret);
> > > +		DRM_ERROR("failed to attach bridge to encoder %s: %d\n",
> > > +			  encoder->name, ret);
> > >  #endif
> > > -
> > > +	}
> > 
> > This looks fine as such, but I'm concerned about the direction it's
> > taking. Ideally, probe deferral should happen at probe time, way before
> > the bridge is attached. Doing otherwise is a step in the wrong direction
> > in my opinion, and something we'll end up regretting when we'll feel the
> > pain it inflicts.
> 
> The particular case I'm seeing this is the nwl driver probe deferrals if
> the panel bridge isn't ready (which needs a bunch of components
> (dsi, panel, backlight wrapped led, ...) and it probes fine later on so I
> wonder where you see the actual error cause? That downstream of the
> bridge isn't ready or that the display controller is already attaching
> the bridge?

I should add that mxsfb does a `dev_err_probe()` already when checking
the return value of `drm_bridge_attach()` so the error printed is
triggered by the additional check added in the above function while the
code path already ignored -EPROBE_DEFER before. This looks sensible to
me since upper layers can't known when all the downstream bridges are
done probing or am I missing something?

Cheers,
 -- Guido

> 
> Cheers,
>  -- Guido
> 
> > 
> > >  	return ret;
> > >  }
> > >  EXPORT_SYMBOL(drm_bridge_attach);
> > 
> > -- 
> > Regards,
> > 
> > Laurent Pinchart
> >