[PATCH v2 02/11] drm/msm/disp/dpu1: Add support for DSC
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Thu Oct 14 14:40:39 UTC 2021
On 07/10/2021 10:08, Vinod Koul wrote:
> Display Stream Compression (DSC) is one of the hw blocks in dpu, so add
> support by adding hw blocks for DSC
>
> Signed-off-by: Vinod Koul <vkoul at kernel.org>
> ---
> Changes since
> v1:
> - remove unused variable lp
> - Update copyright year
> RFC:
> - Drop unused enums
>
> drivers/gpu/drm/msm/Makefile | 1 +
> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 13 ++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c | 210 ++++++++++++++++++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h | 77 +++++++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 13 ++
> 5 files changed, 314 insertions(+)
> create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
> create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
>
> diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
> index 904535eda0c4..46c05e401d04 100644
> --- a/drivers/gpu/drm/msm/Makefile
> +++ b/drivers/gpu/drm/msm/Makefile
> @@ -60,6 +60,7 @@ msm-y := \
> disp/dpu1/dpu_formats.o \
> disp/dpu1/dpu_hw_catalog.o \
> disp/dpu1/dpu_hw_ctl.o \
> + disp/dpu1/dpu_hw_dsc.o \
> disp/dpu1/dpu_hw_interrupts.o \
> disp/dpu1/dpu_hw_intf.o \
> disp/dpu1/dpu_hw_lm.o \
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index d2a945a27cfa..699c378814b1 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -553,6 +553,16 @@ struct dpu_merge_3d_cfg {
> const struct dpu_merge_3d_sub_blks *sblk;
> };
>
> +/**
> + * struct dpu_dsc_cfg - information of DSC blocks
> + * @id enum identifying this block
> + * @base register offset of this block
> + * @features bit mask identifying sub-blocks/features
> + */
> +struct dpu_dsc_cfg {
> + DPU_HW_BLK_INFO;
> +};
> +
> /**
> * struct dpu_intf_cfg - information of timing engine blocks
> * @id enum identifying this block
> @@ -757,6 +767,9 @@ struct dpu_mdss_cfg {
> u32 merge_3d_count;
> const struct dpu_merge_3d_cfg *merge_3d;
>
> + u32 dsc_count;
> + struct dpu_dsc_cfg *dsc;
> +
> u32 intf_count;
> const struct dpu_intf_cfg *intf;
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
> new file mode 100644
> index 000000000000..09682c4832ba
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c
> @@ -0,0 +1,210 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2020-2021, Linaro Limited
> + */
> +
> +#include "dpu_kms.h"
> +#include "dpu_hw_catalog.h"
> +#include "dpu_hwio.h"
> +#include "dpu_hw_mdss.h"
> +#include "dpu_hw_dsc.h"
> +
> +#define DSC_COMMON_MODE 0x000
> +#define DSC_ENC 0X004
> +#define DSC_PICTURE 0x008
> +#define DSC_SLICE 0x00C
> +#define DSC_CHUNK_SIZE 0x010
> +#define DSC_DELAY 0x014
> +#define DSC_SCALE_INITIAL 0x018
> +#define DSC_SCALE_DEC_INTERVAL 0x01C
> +#define DSC_SCALE_INC_INTERVAL 0x020
> +#define DSC_FIRST_LINE_BPG_OFFSET 0x024
> +#define DSC_BPG_OFFSET 0x028
> +#define DSC_DSC_OFFSET 0x02C
> +#define DSC_FLATNESS 0x030
> +#define DSC_RC_MODEL_SIZE 0x034
> +#define DSC_RC 0x038
> +#define DSC_RC_BUF_THRESH 0x03C
> +#define DSC_RANGE_MIN_QP 0x074
> +#define DSC_RANGE_MAX_QP 0x0B0
> +#define DSC_RANGE_BPG_OFFSET 0x0EC
> +
> +static void dpu_hw_dsc_disable(struct dpu_hw_dsc *dsc)
> +{
> + struct dpu_hw_blk_reg_map *c = &dsc->hw;
> +
> + DPU_REG_WRITE(c, DSC_COMMON_MODE, 0);
> +}
> +
> +static void dpu_hw_dsc_config(struct dpu_hw_dsc *hw_dsc,
> + struct msm_display_dsc_config *dsc, u32 mode)
> +{
> + struct dpu_hw_blk_reg_map *c = &hw_dsc->hw;
> + u32 data, lsb, bpp;
> + u32 initial_lines = dsc->initial_lines;
> + bool is_cmd_mode = !(mode & BIT(2));
DSC_MODE_VIDEO
> +
> + DPU_REG_WRITE(c, DSC_COMMON_MODE, mode);
> +
> + if (is_cmd_mode)
> + initial_lines += 1;
> +
> + data = (initial_lines << 20);
> + data |= ((dsc->slice_last_group_size - 1) << 18);
> + /* bpp is 6.4 format, 4 LSBs bits are for fractional part */
> + data |= dsc->drm->bits_per_pixel << 12;
> + lsb = dsc->drm->bits_per_pixel % 4;
> + bpp = dsc->drm->bits_per_pixel / 4;
> + bpp *= 4;
> + bpp <<= 4;
> + bpp |= lsb;
> +
> + data |= bpp << 8;
> + data |= (dsc->drm->block_pred_enable << 7);
> + data |= (dsc->drm->line_buf_depth << 3);
> + data |= (dsc->drm->simple_422 << 2);
> + data |= (dsc->drm->convert_rgb << 1);
> + data |= dsc->drm->bits_per_component;
> +
> + DPU_REG_WRITE(c, DSC_ENC, data);
> +
> + data = dsc->drm->pic_width << 16;
> + data |= dsc->drm->pic_height;
> + DPU_REG_WRITE(c, DSC_PICTURE, data);
> +
> + data = dsc->drm->slice_width << 16;
> + data |= dsc->drm->slice_height;
> + DPU_REG_WRITE(c, DSC_SLICE, data);
> +
> + data = dsc->drm->slice_chunk_size << 16;
> + DPU_REG_WRITE(c, DSC_CHUNK_SIZE, data);
> +
> + data = dsc->drm->initial_dec_delay << 16;
> + data |= dsc->drm->initial_xmit_delay;
> + DPU_REG_WRITE(c, DSC_DELAY, data);
> +
> + data = dsc->drm->initial_scale_value;
> + DPU_REG_WRITE(c, DSC_SCALE_INITIAL, data);
> +
> + data = dsc->drm->scale_decrement_interval;
> + DPU_REG_WRITE(c, DSC_SCALE_DEC_INTERVAL, data);
> +
> + data = dsc->drm->scale_increment_interval;
> + DPU_REG_WRITE(c, DSC_SCALE_INC_INTERVAL, data);
> +
> + data = dsc->drm->first_line_bpg_offset;
> + DPU_REG_WRITE(c, DSC_FIRST_LINE_BPG_OFFSET, data);
> +
> + data = dsc->drm->nfl_bpg_offset << 16;
> + data |= dsc->drm->slice_bpg_offset;
> + DPU_REG_WRITE(c, DSC_BPG_OFFSET, data);
> +
> + data = dsc->drm->initial_offset << 16;
> + data |= dsc->drm->final_offset;
> + DPU_REG_WRITE(c, DSC_DSC_OFFSET, data);
> +
> + data = dsc->det_thresh_flatness << 10;
> + data |= dsc->drm->flatness_max_qp << 5;
> + data |= dsc->drm->flatness_min_qp;
> + DPU_REG_WRITE(c, DSC_FLATNESS, data);
> +
> + data = dsc->drm->rc_model_size;
> + DPU_REG_WRITE(c, DSC_RC_MODEL_SIZE, data);
> +
> + data = dsc->drm->rc_tgt_offset_low << 18;
> + data |= dsc->drm->rc_tgt_offset_high << 14;
> + data |= dsc->drm->rc_quant_incr_limit1 << 9;
> + data |= dsc->drm->rc_quant_incr_limit0 << 4;
> + data |= dsc->drm->rc_edge_factor;
> + DPU_REG_WRITE(c, DSC_RC, data);
> +}
> +
> +static void dpu_hw_dsc_config_thresh(struct dpu_hw_dsc *hw_dsc,
> + struct msm_display_dsc_config *dsc)
I thought that it might make sense to pass just
drm_dsc_rc_range_parameters here, but it's a matter of personal
preference. I won't insist on doing that.
> +{
> + struct drm_dsc_rc_range_parameters *rc = dsc->drm->rc_range_params;
> + struct dpu_hw_blk_reg_map *c = &hw_dsc->hw;
> + u32 off;
> + int i;
> +
> + off = DSC_RC_BUF_THRESH;
> + for (i = 0; i < DSC_NUM_BUF_RANGES - 1 ; i++) {
> + DPU_REG_WRITE(c, off, dsc->drm->rc_buf_thresh[i]);
> + off += 4;
> + }
> +
> + off = DSC_RANGE_MIN_QP;
> + for (i = 0; i < DSC_NUM_BUF_RANGES; i++) {
> + DPU_REG_WRITE(c, off, rc[i].range_min_qp);
> + off += 4;
> + }
> +
> + off = DSC_RANGE_MAX_QP;
> + for (i = 0; i < 15; i++) {
> + DPU_REG_WRITE(c, off, rc[i].range_max_qp);
> + off += 4;
> + }
> +
> + off = DSC_RANGE_BPG_OFFSET;
> + for (i = 0; i < 15; i++) {
> + DPU_REG_WRITE(c, off, rc[i].range_bpg_offset);
> + off += 4;
> + }
> +}
> +
> +static struct dpu_dsc_cfg *_dsc_offset(enum dpu_dsc dsc,
> + struct dpu_mdss_cfg *m,
> + void __iomem *addr,
> + struct dpu_hw_blk_reg_map *b)
> +{
> + int i;
> +
> + for (i = 0; i < m->dsc_count; i++) {
> + if (dsc == m->dsc[i].id) {
> + b->base_off = addr;
> + b->blk_off = m->dsc[i].base;
> + b->length = m->dsc[i].len;
> + b->hwversion = m->hwversion;
> + b->log_mask = DPU_DBG_MASK_DSC;
> + return &m->dsc[i];
> + }
> + }
> +
> + return NULL;
> +}
> +
> +static void _setup_dsc_ops(struct dpu_hw_dsc_ops *ops,
> + unsigned long cap)
> +{
> + ops->dsc_disable = dpu_hw_dsc_disable;
> + ops->dsc_config = dpu_hw_dsc_config;
> + ops->dsc_config_thresh = dpu_hw_dsc_config_thresh;
> +};
> +
> +struct dpu_hw_dsc *dpu_hw_dsc_init(enum dpu_dsc idx, void __iomem *addr,
> + struct dpu_mdss_cfg *m)
> +{
> + struct dpu_hw_dsc *c;
> + struct dpu_dsc_cfg *cfg;
> +
> + c = kzalloc(sizeof(*c), GFP_KERNEL);
> + if (!c)
> + return ERR_PTR(-ENOMEM);
> +
> + cfg = _dsc_offset(idx, m, addr, &c->hw);
> + if (IS_ERR_OR_NULL(cfg)) {
> + kfree(c);
> + return ERR_PTR(-EINVAL);
> + }
> +
> + c->idx = idx;
> + c->caps = cfg;
> + _setup_dsc_ops(&c->ops, c->caps->features);
> +
> + return c;
> +}
> +
> +void dpu_hw_dsc_destroy(struct dpu_hw_dsc *dsc)
> +{
> + kfree(dsc);
> +}
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
> new file mode 100644
> index 000000000000..648c9e4d8749
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h
> @@ -0,0 +1,77 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/* Copyright (c) 2020-2021, Linaro Limited */
> +
> +#ifndef _DPU_HW_DSC_H
> +#define _DPU_HW_DSC_H
> +
> +#include <drm/drm_dsc.h>
> +
> +#define DSC_MODE_SPLIT_PANEL BIT(0)
> +#define DSC_MODE_MULTIPLEX BIT(1)
> +#define DSC_MODE_VIDEO BIT(2)
> +
> +struct dpu_hw_dsc;
> +
> +/**
> + * struct dpu_hw_dsc_ops - interface to the dsc hardware driver functions
> + * Assumption is these functions will be called after clocks are enabled
> + */
> +struct dpu_hw_dsc_ops {
> + /**
> + * dsc_disable - disable dsc
> + * @hw_dsc: Pointer to dsc context
> + */
> + void (*dsc_disable)(struct dpu_hw_dsc *hw_dsc);
> +
> + /**
> + * dsc_config - configures dsc encoder
> + * @hw_dsc: Pointer to dsc context
> + * @dsc: panel dsc parameters
> + * @mode: dsc topology mode to be set
> + */
> + void (*dsc_config)(struct dpu_hw_dsc *hw_dsc,
> + struct msm_display_dsc_config *dsc, u32 mode);
> +
> + /**
> + * dsc_config_thresh - programs panel thresholds
> + * @hw_dsc: Pointer to dsc context
> + * @dsc: panel dsc parameters
> + */
> + void (*dsc_config_thresh)(struct dpu_hw_dsc *hw_dsc,
> + struct msm_display_dsc_config *dsc);
> +};
> +
> +struct dpu_hw_dsc {
> + struct dpu_hw_blk base;
> + struct dpu_hw_blk_reg_map hw;
> +
> + /* dsc */
> + enum dpu_dsc idx;
> + const struct dpu_dsc_cfg *caps;
> +
> + /* ops */
> + struct dpu_hw_dsc_ops ops;
> +};
> +
> +/**
> + * dpu_hw_dsc_init - initializes the dsc block for the passed dsc idx.
> + * @idx: DSC index for which driver object is required
> + * @addr: Mapped register io address of MDP
> + * @m: Pointer to mdss catalog data
> + * Returns: Error code or allocated dpu_hw_dsc context
> + */
> +struct dpu_hw_dsc *dpu_hw_dsc_init(enum dpu_dsc idx, void __iomem *addr,
> + struct dpu_mdss_cfg *m);
> +
> +/**
> + * dpu_hw_dsc_destroy - destroys dsc driver context
> + * @dsc: Pointer to dsc driver context returned by dpu_hw_dsc_init
> + */
> +void dpu_hw_dsc_destroy(struct dpu_hw_dsc *dsc);
> +
> +static inline struct dpu_hw_dsc *to_dpu_hw_dsc(struct dpu_hw_blk *hw)
> +{
> + return container_of(hw, struct dpu_hw_dsc, base);
> +}
> +
> +#endif /* _DPU_HW_DSC_H */
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> index bb9ceadeb0bb..b0ce8cb97d22 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> @@ -97,6 +97,7 @@ enum dpu_hw_blk_type {
> DPU_HW_BLK_WB,
> DPU_HW_BLK_DSPP,
> DPU_HW_BLK_MERGE_3D,
> + DPU_HW_BLK_DSC,
> DPU_HW_BLK_MAX,
> };
>
> @@ -176,6 +177,17 @@ enum dpu_ctl {
> CTL_MAX
> };
>
> +enum dpu_dsc {
> + DSC_NONE = 0,
> + DSC_0,
> + DSC_1,
> + DSC_2,
> + DSC_3,
> + DSC_4,
> + DSC_5,
> + DSC_MAX
> +};
> +
> enum dpu_pingpong {
> PINGPONG_0 = 1,
> PINGPONG_1,
> @@ -437,5 +449,6 @@ struct dpu_mdss_color {
> #define DPU_DBG_MASK_VBIF (1 << 8)
> #define DPU_DBG_MASK_ROT (1 << 9)
> #define DPU_DBG_MASK_DSPP (1 << 10)
> +#define DPU_DBG_MASK_DSC (1 << 11)
>
> #endif /* _DPU_HW_MDSS_H */
>
--
With best wishes
Dmitry
More information about the dri-devel
mailing list