[PATCH v2 1/2] drm/panel: Add driver for LG.Philips SW43101 DSI video mode panel
Sam Ravnborg
sam at ravnborg.org
Sat Oct 16 18:47:49 UTC 2021
Hi Yassine,
Sorry for the late response - have been away from kernel stuff for some
months.
A few comments in the following - mostly backlight related.
Please fix and resend.
Note: bindings comes before the panel driver - as we cannot apply a
panel driver for an unknown binding.
Sam
On Thu, Sep 09, 2021 at 04:40:02AM +0000, Yassine Oudjana wrote:
> Add a driver for the LG.Philips SW43101 FHD (1080x1920) OLED DSI video mode panel.
> This driver has been generated using linux-mdss-dsi-panel-driver-generator.
>
> Signed-off-by: Yassine Oudjana <y.oudjana at protonmail.com>
> ---
> Changes since v1:
> - Add regulator support.
> - Add MAINTAINERS entry.
>
> MAINTAINERS | 5 +
> drivers/gpu/drm/panel/Kconfig | 10 +
> drivers/gpu/drm/panel/Makefile | 1 +
> .../gpu/drm/panel/panel-lgphilips-sw43101.c | 363 ++++++++++++++++++
> 4 files changed, 379 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-lgphilips-sw43101.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f58dad1a1922..46431e8ad373 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -5899,6 +5899,11 @@ S: Orphan / Obsolete
> F: drivers/gpu/drm/i810/
> F: include/uapi/drm/i810_drm.h
>
> +DRM DRIVER FOR LG.PHILIPS SW43101 PANEL
> +M: Yassine Oudjana <y.oudjana at protonmail.com>
> +S: Maintained
> +F: drivers/gpu/drm/panel/panel-lgphilips-sw43101.c
> +
> DRM DRIVER FOR LVDS PANELS
> M: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> L: dri-devel at lists.freedesktop.org
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index beb581b96ecd..d8741c35bbfc 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -226,6 +226,16 @@ config DRM_PANEL_SAMSUNG_LD9040
> depends on OF && SPI
> select VIDEOMODE_HELPERS
>
> +config DRM_PANEL_LGPHILIPS_SW43101
> + tristate "LG.Philips SW43101 DSI video mode panel"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y here if you want to enable support for the LG.Philips SW43101 FHD
> + (1080x1920) OLED DSI video mode panel found on the Xiaomi Mi Note 2.
> + To compile this driver as a module, choose M here.
> +
> config DRM_PANEL_LG_LB035Q02
> tristate "LG LB035Q024573 RGB panel"
> depends on GPIOLIB && OF && SPI
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index c8132050bcec..e79143ad14dd 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_DRM_PANEL_KHADAS_TS050) += panel-khadas-ts050.o
> obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o
> obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o
> obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o
> +obj-$(CONFIG_DRM_PANEL_LGPHILIPS_SW43101) += panel-lgphilips-sw43101.o
> obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
> obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
> obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
> diff --git a/drivers/gpu/drm/panel/panel-lgphilips-sw43101.c b/drivers/gpu/drm/panel/panel-lgphilips-sw43101.c
> new file mode 100644
> index 000000000000..b7adf1d4a8ab
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-lgphilips-sw43101.c
> @@ -0,0 +1,363 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * LG.Philips SW43101 OLED Panel driver
> + * Generated with linux-mdss-dsi-panel-driver-generator
> + *
> + * Copyright (c) 2020 Yassine Oudjana <y.oudjana at protonmail.com>
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +
> +static const char * const regulator_names[] = {
> + "vdd",
> + "avdd",
> + "elvdd",
> + "elvss",
> +};
> +
> +struct sw43101_device {
> + struct drm_panel panel;
> + struct mipi_dsi_device *dsi;
> + struct gpio_desc *reset_gpio;
> + struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)];
> + bool prepared;
> +};
> +
> +static inline
> +struct sw43101_device *to_sw43101_device(struct drm_panel *panel)
> +{
> + return container_of(panel, struct sw43101_device, panel);
> +}
> +
> +#define dsi_dcs_write_seq(dsi, seq...) do { \
> + static const u8 d[] = { seq }; \
> + int ret; \
> + ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \
> + if (ret < 0) \
> + return ret; \
> + } while (0)
> +
> +static void sw43101_reset(struct sw43101_device *ctx)
> +{
> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> + usleep_range(10000, 11000);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + usleep_range(1000, 2000);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> + msleep(20);
> +}
> +
> +static int sw43101_on(struct sw43101_device *ctx)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> + dsi_dcs_write_seq(dsi, 0xb0, 0x5a);
> + usleep_range(1000, 2000);
> + dsi_dcs_write_seq(dsi, 0xb2, 0x13, 0x12, 0x40, 0xd0, 0xff, 0xff, 0x15);
> + dsi_dcs_write_seq(dsi, 0xe3, 0x01);
> + usleep_range(1000, 2000);
> + dsi_dcs_write_seq(dsi, 0xf3, 0x03, 0x00, 0x00);
> +
> + ret = mipi_dsi_dcs_set_display_brightness(dsi, 0x0020);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set display brightness: %d\n", ret);
> + return ret;
> + }
> +
> + dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);
> + dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
> + dsi_dcs_write_seq(dsi, 0xb0, 0x00);
> + usleep_range(1000, 2000);
> +
> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
> + return ret;
> + }
> + msleep(120);
> +
> + ret = mipi_dsi_dcs_set_display_on(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set display on: %d\n", ret);
> + return ret;
> + }
> + msleep(20);
> +
> + return 0;
> +}
> +
> +static int sw43101_off(struct sw43101_device *ctx)
> +{
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct device *dev = &dsi->dev;
> + int ret;
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_dcs_set_display_off(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set display off: %d\n", ret);
> + return ret;
> + }
> + usleep_range(2000, 3000);
> +
> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
> + return ret;
> + }
> + msleep(128);
> +
> + return 0;
> +}
> +
> +static int sw43101_prepare(struct drm_panel *panel)
> +{
> + struct sw43101_device *ctx = to_sw43101_device(panel);
> + struct device *dev = &ctx->dsi->dev;
> + int ret;
> +
> + if (ctx->prepared)
> + return 0;
> +
> + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> + if (ret < 0) {
> + dev_err(dev, "Failed to enable regulators: %d\n", ret);
> + return ret;
> + }
> +
> + sw43101_reset(ctx);
> +
> + ret = sw43101_on(ctx);
> + if (ret < 0) {
> + dev_err(dev, "Failed to initialize panel: %d\n", ret);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + return ret;
> + }
> +
> + ctx->prepared = true;
> + return 0;
> +}
> +
> +static int sw43101_unprepare(struct drm_panel *panel)
> +{
> + struct sw43101_device *ctx = to_sw43101_device(panel);
> + struct device *dev = &ctx->dsi->dev;
> + int ret;
> +
> + if (!ctx->prepared)
> + return 0;
> +
> + ret = sw43101_off(ctx);
> + if (ret < 0)
> + dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
> +
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> +
> + ret = regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> + if (ret < 0) {
> + dev_err(dev, "Failed to disable regulators: %d\n", ret);
> + return ret;
> + }
> +
> + ctx->prepared = false;
> + return 0;
> +}
> +
> +static const struct drm_display_mode sw43101_mode = {
> + .clock = (1080 + 56 + 8 + 60) * (1920 + 40 + 8 + 48) * 58 / 1000,
> + .hdisplay = 1080,
> + .hsync_start = 1080 + 56,
> + .hsync_end = 1080 + 56 + 8,
> + .htotal = 1080 + 56 + 8 + 60,
> + .vdisplay = 1920,
> + .vsync_start = 1920 + 40,
> + .vsync_end = 1920 + 40 + 8,
> + .vtotal = 1920 + 40 + 8 + 48,
> + .width_mm = 71,
> + .height_mm = 126,
> +};
> +
> +static int sw43101_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(connector->dev, &sw43101_mode);
> + if (!mode)
> + return -ENOMEM;
> +
> + drm_mode_set_name(mode);
> +
> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> + connector->display_info.width_mm = mode->width_mm;
> + connector->display_info.height_mm = mode->height_mm;
> + drm_mode_probed_add(connector, mode);
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs sw43101_panel_funcs = {
> + .prepare = sw43101_prepare,
> + .unprepare = sw43101_unprepare,
> + .get_modes = sw43101_get_modes,
> +};
> +
> +static int sw43101_bl_update_status(struct backlight_device *bl)
> +{
> + struct mipi_dsi_device *dsi = bl_get_data(bl);
> + u16 brightness = bl->props.brightness;
Use backlight_get_brightness() here.
> + int ret;
> +
> + if (bl->props.power != FB_BLANK_UNBLANK ||
> + bl->props.fb_blank != FB_BLANK_UNBLANK ||
> + bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
> + brightness = 0;
And drop this part - as this is already done in
backlight_get_brightness().
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_dcs_set_display_brightness(dsi, brightness);
> + if (ret < 0)
> + return ret;
> +
> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> + return 0;
> +}
> +
> +static int sw43101_bl_get_brightness(struct backlight_device *bl)
> +{
> + struct mipi_dsi_device *dsi = bl_get_data(bl);
> + u16 brightness = bl->props.brightness;
Use backlight_get_brightness() here.
> + int ret;
> +
> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +
> + ret = mipi_dsi_dcs_get_display_brightness(dsi, &brightness);
> + if (ret < 0)
> + return ret;
> +
> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> + return brightness & 0xff;
Why is the "& 0xff" needed? Can you not trust the HW?
> +}
> +
> +static const struct backlight_ops sw43101_bl_ops = {
> + .update_status = sw43101_bl_update_status,
> + .get_brightness = sw43101_bl_get_brightness,
> +};
> +
> +static struct backlight_device *
> +sw43101_create_backlight(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct backlight_properties props = {
const
> + .type = BACKLIGHT_RAW,
> + .brightness = 255,
> + .max_brightness = 255,
> + };
> +
> + return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
> + &sw43101_bl_ops, &props);
> +}
> +
> +static int sw43101_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct sw43101_device *ctx;
> + size_t i;
> + int ret;
> +
> + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> +
> + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(ctx->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
> + "Failed to get reset-gpios\n");
> +
> + for (i = 0; i < ARRAY_SIZE(ctx->supplies); ++i)
> + ctx->supplies[i].supply = regulator_names[i];
> +
> + ret = devm_regulator_bulk_get(&dsi->dev, ARRAY_SIZE(ctx->supplies),
> + ctx->supplies);
> + if (ret < 0) {
> + dev_err(&dsi->dev, "Failed to get regulators\n");
> + return ret;
> + }
> +
> + ctx->dsi = dsi;
> + mipi_dsi_set_drvdata(dsi, ctx);
> +
> + dsi->lanes = 4;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_CLOCK_NON_CONTINUOUS;
> +
> + drm_panel_init(&ctx->panel, dev, &sw43101_panel_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> +
> + ctx->panel.backlight = sw43101_create_backlight(dsi);
> + if (IS_ERR(ctx->panel.backlight))
> + return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
> + "Failed to create backlight\n");
> +
> + drm_panel_add(&ctx->panel);
> +
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0) {
> + dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int sw43101_remove(struct mipi_dsi_device *dsi)
> +{
> + struct sw43101_device *ctx = mipi_dsi_get_drvdata(dsi);
> + int ret;
> +
> + ret = mipi_dsi_detach(dsi);
> + if (ret < 0)
> + dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
> +
> + drm_panel_remove(&ctx->panel);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id sw43101_of_match[] = {
> + { .compatible = "lgphilips,sw43101" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, sw43101_of_match);
> +
> +static struct mipi_dsi_driver sw43101_driver = {
> + .probe = sw43101_probe,
> + .remove = sw43101_remove,
> + .driver = {
> + .name = "panel-lgphilips-sw43101",
> + .of_match_table = sw43101_of_match,
> + },
> +};
> +module_mipi_dsi_driver(sw43101_driver);
> +
> +MODULE_AUTHOR("Yassine Oudjana <y.oudjana at protonmail.com>");
> +MODULE_DESCRIPTION("LG.Philips SW43101 DSI video mode panel driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.33.0
>
More information about the dri-devel
mailing list