[PATCH 8/9] drm/simpledrm: Support virtual screen sizes

[Thomas Zimmermann]

Add constants for the maximum size of the shadow-plane surface
size. Useful for shadow planes with virtual screen sizes. The
current sizes are 4096 scanlines with 4096 pixels each. This
seems reasonable for current hardware, but can be increased as
necessary.

In simpledrm, set the maximum framebuffer size from the constants
for shadow planes. Implements support for virtual screen sizes and
page flipping on the fbdev console.

Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
---
 drivers/gpu/drm/tiny/simpledrm.c    |  9 +++++++--
 include/drm/drm_gem_atomic_helper.h | 18 ++++++++++++++++++
 2 files changed, 25 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/tiny/simpledrm.c b/drivers/gpu/drm/tiny/simpledrm.c
index e872121e9fb0..e42ae1c6ebcd 100644
--- a/drivers/gpu/drm/tiny/simpledrm.c
+++ b/drivers/gpu/drm/tiny/simpledrm.c
@@ -2,6 +2,7 @@
 
 #include <linux/clk.h>
 #include <linux/of_clk.h>
+#include <linux/minmax.h>
 #include <linux/platform_data/simplefb.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
@@ -776,6 +777,7 @@ static int simpledrm_device_init_modeset(struct simpledrm_device *sdev)
 	struct drm_display_mode *mode = &sdev->mode;
 	struct drm_connector *connector = &sdev->connector;
 	struct drm_simple_display_pipe *pipe = &sdev->pipe;
+	unsigned long max_width, max_height;
 	const uint32_t *formats;
 	size_t nformats;
 	int ret;
@@ -784,10 +786,13 @@ static int simpledrm_device_init_modeset(struct simpledrm_device *sdev)
 	if (ret)
 		return ret;
 
+	max_width = max_t(unsigned long, mode->hdisplay, DRM_SHADOW_PLANE_MAX_WIDTH);
+	max_height = max_t(unsigned long, mode->vdisplay, DRM_SHADOW_PLANE_MAX_HEIGHT);
+
 	dev->mode_config.min_width = mode->hdisplay;
-	dev->mode_config.max_width = mode->hdisplay;
+	dev->mode_config.max_width = max_width;
 	dev->mode_config.min_height = mode->vdisplay;
-	dev->mode_config.max_height = mode->vdisplay;
+	dev->mode_config.max_height = max_height;
 	dev->mode_config.prefer_shadow_fbdev = true;
 	dev->mode_config.preferred_depth = sdev->format->cpp[0] * 8;
 	dev->mode_config.funcs = &simpledrm_mode_config_funcs;
diff --git a/include/drm/drm_gem_atomic_helper.h b/include/drm/drm_gem_atomic_helper.h
index 48222a107873..54983ecf641a 100644
--- a/include/drm/drm_gem_atomic_helper.h
+++ b/include/drm/drm_gem_atomic_helper.h
@@ -22,6 +22,24 @@ int drm_gem_simple_display_pipe_prepare_fb(struct drm_simple_display_pipe *pipe,
  * Helpers for planes with shadow buffers
  */
 
+/**
+ * DRM_SHADOW_PLANE_MAX_WIDTH - Maximum width of a plane's shadow buffer in pixels
+ *
+ * For drivers with shadow planes, the maximum width of the framebuffer is
+ * usually independent from hardware limitations. Drivers can initialize struct
+ * drm_mode_config.max_width from DRM_SHADOW_PLANE_MAX_WIDTH.
+ */
+#define DRM_SHADOW_PLANE_MAX_WIDTH	(1ul << 12)
+
+/**
+ * DRM_SHADOW_PLANE_MAX_HEIGHT - Maximum height of a plane's shadow buffer in scanlines
+ *
+ * For drivers with shadow planes, the maximum height of the framebuffer is
+ * usually independent from hardware limitations. Drivers can initialize struct
+ * drm_mode_config.max_height from DRM_SHADOW_PLANE_MAX_HEIGHT.
+ */
+#define DRM_SHADOW_PLANE_MAX_HEIGHT	(1ul << 12)
+
 /**
  * struct drm_shadow_plane_state - plane state for planes with shadow buffers
  *
-- 
2.33.0