[PATCH v3 13/16] drm/panel-simple-edp: hpd_reliable shouldn't be subtraced from hpd_absent

[Douglas Anderson]

Now that the delays are named / described with eDP-centric names, it
becomes clear that we should really specify the "hpd_reliable" and
"hpd_absent" separately without taking the other into account. Let's
fix it.

This should be a no-op change and just adjust how we specify
things. The actual delays should be the same before and after for the
one panel that currently species both "hpd_reliable" and "hpd_absent".

Signed-off-by: Douglas Anderson <dianders at chromium.org>
---

(no changes since v1)

 drivers/gpu/drm/panel/panel-simple-edp.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-simple-edp.c b/drivers/gpu/drm/panel/panel-simple-edp.c
index ede5e3e4920b..762589ef66c3 100644
--- a/drivers/gpu/drm/panel/panel-simple-edp.c
+++ b/drivers/gpu/drm/panel/panel-simple-edp.c
@@ -423,7 +423,7 @@ static int panel_edp_prepare_once(struct panel_edp *p)
 
 	delay = p->desc->delay.hpd_reliable;
 	if (p->no_hpd)
-		delay += p->desc->delay.hpd_absent;
+		delay = max(delay, p->desc->delay.hpd_absent);
 	if (delay)
 		msleep(delay);
 
@@ -1039,15 +1039,13 @@ static const struct panel_desc boe_nv133fhm_n61 = {
 		 * spike on the HPD line.  It was explained that this spike
 		 * was until the TCON data download was complete.  On
 		 * one system this was measured at 8 ms.  We'll put 15 ms
-		 * in the prepare delay just to be safe and take it away
-		 * from the hpd_absent (which would otherwise be 200 ms)
-		 * to handle this.  That means:
+		 * in the prepare delay just to be safe.  That means:
 		 * - If HPD isn't hooked up you still have 200 ms delay.
 		 * - If HPD is hooked up we won't try to look at it for the
 		 *   first 15 ms.
 		 */
 		.hpd_reliable = 15,
-		.hpd_absent = 185,
+		.hpd_absent = 200,
 
 		.unprepare = 500,
 	},
-- 
2.33.0.259.gc128427fd7-goog