[PATCH v5 08/16] soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195 vdosys1

[Chun-Kuang Hu]

Hi, Nancy:

Nancy.Lin <nancy.lin at mediatek.com> 於 2021年9月6日 週一 下午3:15寫道：
>
> Add cmdq support for mtk-mmsys config API.
> The mmsys config register settings need to take effect with the other
> HW settings(like OVL_ADAPTOR...) at the same vblanking time.
>
> If we use CPU to write the mmsys reg, we can't guarantee all the
> settings can be written in the same vblanking time.
> Cmdq is used for this purpose. We prepare all the related HW settings
> in one cmdq packet. The first command in the packet is "wait stream done",
> and then following with all the HW settings. After the cmdq packet is
> flush to GCE HW. The GCE waits for the "stream done event" to coming
> and then starts flushing all the HW settings. This can guarantee all
> the settings flush in the same vblanking.
>
> Signed-off-by: Nancy.Lin <nancy.lin at mediatek.com>
> ---
>  drivers/soc/mediatek/mtk-mmsys.c       | 28 +++++++++++++++++++++-----
>  include/linux/soc/mediatek/mtk-mmsys.h |  6 +++++-
>  2 files changed, 28 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
> index 3a38b8269c71..060065501b8a 100644
> --- a/drivers/soc/mediatek/mtk-mmsys.c
> +++ b/drivers/soc/mediatek/mtk-mmsys.c
> @@ -81,6 +81,7 @@ struct mtk_mmsys {
>         const struct mtk_mmsys_driver_data *data;
>         spinlock_t lock; /* protects mmsys_sw_rst_b reg */
>         struct reset_controller_dev rcdev;
> +       struct cmdq_client_reg cmdq_base;
>  };
>
>  void mtk_mmsys_ddp_connect(struct device *dev,
> @@ -174,7 +175,7 @@ static const struct reset_control_ops mtk_mmsys_reset_ops = {
>  };
>
>  void mtk_mmsys_ddp_config(struct device *dev, enum mtk_mmsys_config_type config,
> -                         u32 id, u32 val)
> +                         u32 id, u32 val, struct cmdq_pkt *cmdq_pkt)
>  {
>         struct mtk_mmsys *mmsys = dev_get_drvdata(dev);
>         const struct mtk_mmsys_config *mmsys_config = mmsys->data->config;
> @@ -197,10 +198,20 @@ void mtk_mmsys_ddp_config(struct device *dev, enum mtk_mmsys_config_type config,
>         mask = mmsys_config[i].mask;
>         reg_val = val << mmsys_config[i].shift;
>
> -       u32 tmp = readl(mmsys->regs + offset);
> -
> -       tmp = (tmp & ~mask) | reg_val;
> -       writel(tmp, mmsys->regs + offset);
> +#if IS_REACHABLE(CONFIG_MTK_CMDQ)
> +       if (cmdq_pkt && mmsys->cmdq_base.size) {
> +               cmdq_pkt_write_mask(cmdq_pkt, mmsys->cmdq_base.subsys,
> +                                   mmsys->cmdq_base.offset + offset, reg_val,
> +                                   mask);
> +       } else {
> +#endif
> +               u32 tmp = readl(mmsys->regs + offset);
> +
> +               tmp = (tmp & ~mask) | reg_val;
> +               writel(tmp, mmsys->regs + offset);
> +#if IS_REACHABLE(CONFIG_MTK_CMDQ)
> +       }
> +#endif
>  }
>  EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_config);
>
> @@ -236,6 +247,13 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
>         }
>
>         mmsys->data = of_device_get_match_data(&pdev->dev);
> +
> +#if IS_REACHABLE(CONFIG_MTK_CMDQ)
> +       ret = cmdq_dev_get_client_reg(dev, &mmsys->cmdq_base, 0);

Define mediatek,gce-client-reg in binding document first.

Regards,
Chun-Kuang.

> +       if (ret)
> +               dev_dbg(dev, "No mediatek,gce-client-reg!\n");
> +#endif
> +
>         platform_set_drvdata(pdev, mmsys);
>
>         clks = platform_device_register_data(&pdev->dev, mmsys->data->clk_driver,
> diff --git a/include/linux/soc/mediatek/mtk-mmsys.h b/include/linux/soc/mediatek/mtk-mmsys.h
> index ef2a6d9a834b..9705d242849a 100644
> --- a/include/linux/soc/mediatek/mtk-mmsys.h
> +++ b/include/linux/soc/mediatek/mtk-mmsys.h
> @@ -6,6 +6,10 @@
>  #ifndef __MTK_MMSYS_H
>  #define __MTK_MMSYS_H
>
> +#include <linux/mailbox_controller.h>
> +#include <linux/mailbox/mtk-cmdq-mailbox.h>
> +#include <linux/soc/mediatek/mtk-cmdq.h>
> +
>  enum mtk_ddp_comp_id;
>  struct device;
>
> @@ -75,6 +79,6 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
>                               enum mtk_ddp_comp_id next);
>
>  void mtk_mmsys_ddp_config(struct device *dev, enum mtk_mmsys_config_type config,
> -                         u32 id, u32 val);
> +                         u32 id, u32 val, struct cmdq_pkt *cmdq_pkt);
>
>  #endif /* __MTK_MMSYS_H */
> --
> 2.18.0
>