[PATCH v5] drm/i915: Use Transparent Hugepages when IOMMU is enabled
Tvrtko Ursulin
tvrtko.ursulin at linux.intel.com
Thu Sep 9 11:44:48 UTC 2021
From: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
Usage of Transparent Hugepages was disabled in 9987da4b5dcf
("drm/i915: Disable THP until we have a GPU read BW W/A"), but since it
appears majority of performance regressions reported with an enabled IOMMU
can be almost eliminated by turning them on, lets just do that.
To err on the side of safety we keep the current default in cases where
IOMMU is not active, and only when it is default to the "huge=within_size"
mode. Although there probably would be wins to enable them throughout,
more extensive testing across benchmarks and platforms would need to be
done.
With the patch and IOMMU enabled my local testing on a small Skylake part
shows OglVSTangent regression being reduced from ~14% (IOMMU on versus
IOMMU off) to ~2% (same comparison but with THP on).
More detailed testing done in the below referenced Gitlab issue by Eero:
Skylake GT4e:
Performance drops from enabling IOMMU:
30-35% SynMark CSDof
20-25% Unigine Heaven, MemBW GPU write, SynMark VSTangent
~20% GLB Egypt (1/2 screen window)
10-15% GLB T-Rex (1/2 screen window)
8-10% GfxBench T-Rex, MemBW GPU blit
7-8% SynMark DeferredAA + TerrainFly* + ZBuffer
6-7% GfxBench Manhattan 3.0 + 3.1, SynMark TexMem128 & CSCloth
5-6% GfxBench CarChase, Unigine Valley
3-5% GfxBench Vulkan & GL AztecRuins + ALU2, MemBW GPU texture,
SynMark Fill*, Deferred, TerrainPan*
1-2% Most of the other tests
With the patch drops become:
20-25% SynMark TexMem*
15-20% GLB Egypt (1/2 screen window)
10-15% GLB T-Rex (1/2 screen window)
4-7% GfxBench T-Rex, GpuTest Triangle
1-8% GfxBench ALU2 (offscreen 1%, onscreen 8%)
3% GfxBench Manhattan 3.0, SynMark CSDof
2-3% Unigine Heaven + Valley, MemBW GPU texture
1-3 GfxBench Manhattan 3.1 + CarChase + Vulkan & GL AztecRuins
Broxton:
Performance drops from IOMMU, without patch:
30% MemBW GPU write
25% SynMark ZBuffer + Fill*
20% MemBW GPU blit
15% MemBW GPU blend, GpuTest Triangle
10-15% MemBW GPU texture
10% GLB Egypt, Unigine Heaven (had hangs), SynMark TerrainFly*
7-9% GLB T-Rex, GfxBench Manhattan 3.0 + T-Rex,
SynMark Deferred* + TexMem*
6-8% GfxBench CarChase, Unigine Valley,
SynMark CSCloth + ShMapVsm + TerrainPan*
5-6% GfxBench Manhattan 3.1 + GL AztecRuins,
SynMark CSDof + TexFilterTri
2-4% GfxBench ALU2, SynMark DrvRes + GSCloth + ShMapPcf + Batch[0-5] +
TexFilterAniso, GpuTest GiMark + 32-bit Julia
And with patch:
15-20% MemBW GPU texture
10% SynMark TexMem*
8-9% GLB Egypt (1/2 screen window)
4-5% GLB T-Rex (1/2 screen window)
3-6% GfxBench Manhattan 3.0, GpuTest FurMark,
SynMark Deferred + TexFilterTri
3-4% GfxBench Manhattan 3.1 + T-Rex, SynMark VSInstancing
2-4% GpuTest Triangle, SynMark DeferredAA
2-3% Unigine Heaven + Valley
1-3% SynMark Terrain*
1-2% GfxBench CarChase, SynMark TexFilterAniso + ZBuffer
Tigerlake-H:
20-25% MemBW GPU texture
15-20% GpuTest Triangle
13-15% SynMark TerrainFly* + DeferredAA + HdrBloom
8-10% GfxBench Manhattan 3.1, SynMark TerrainPan* + DrvRes
6-7% GfxBench Manhattan 3.0, SynMark TexMem*
4-8% GLB onscreen Fill + T-Rex + Egypt (more in onscreen than
offscreen versions of T-Rex/Egypt)
4-6% GfxBench CarChase + GLES AztecRuins + ALU2, GpuTest 32-bit Julia,
SynMark CSDof + DrvState
3-5% GfxBench T-Rex + Egypt, Unigine Heaven + Valley, GpuTest Plot3D
1-7% Media tests
2-3% MemBW GPU blit
1-3% Most of the rest of 3D tests
With the patch:
6-8% MemBW GPU blend => the only regression in these tests (compared
to IOMMU without THP)
4-6% SynMark DrvState (not impacted) + HdrBloom (improved)
3-4% GLB T-Rex
~3% GLB Egypt, SynMark DrvRes
1-3% GfxBench T-Rex + Egypt, SynMark TexFilterTri
1-2% GfxBench CarChase + GLES AztecRuins, Unigine Valley,
GpuTest Triangle
~1% GfxBench Manhattan 3.0/3.1, Unigine Heaven
Perf of several tests actually improved with IOMMU + THP, compared to no
IOMMU / no THP:
10-15% SynMark Batch[0-3]
5-10% MemBW GPU texture, SynMark ShMapVsm
3-4% SynMark Fill* + Geom*
2-3% SynMark TexMem512 + CSCloth
1-2% SynMark TexMem128 + DeferredAA
As a summary across all platforms, these are the benchmarks where enabling
THP on top of IOMMU enabled brings regressions:
* Skylake GT4e:
20-25% SynMark TexMem*
(whereas all MemBW GPU tests either improve or are not affected)
* Broxton J4205:
7% MemBW GPU texture
2-3% SynMark TexMem*
* Tigerlake-H:
7% MemBW GPU blend
Other benchmarks show either lowering of regressions or improvements.
v2:
* Add Kconfig dependency to transparent hugepages and some help text.
* Move to helper for easier handling of kernel build options.
v3:
* Drop Kconfig. (Daniel)
v4:
* Add some benchmark results to commit message.
v5:
* Add explicit regression summary to commit message. (Eero)
References: b901bb89324a ("drm/i915/gemfs: enable THP")
References: 9987da4b5dcf ("drm/i915: Disable THP until we have a GPU read BW W/A")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/430
Co-developed-by: Chris Wilson <chris at chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>
Cc: Matthew Auld <matthew.auld at intel.com>
Cc: Eero Tamminen <eero.t.tamminen at intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
Cc: Daniel Vetter <daniel at ffwll.ch>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com> # v1
---
drivers/gpu/drm/i915/gem/i915_gemfs.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/gem/i915_gemfs.c b/drivers/gpu/drm/i915/gem/i915_gemfs.c
index 5e6e8c91ab38..dbdbdc344d87 100644
--- a/drivers/gpu/drm/i915/gem/i915_gemfs.c
+++ b/drivers/gpu/drm/i915/gem/i915_gemfs.c
@@ -6,7 +6,6 @@
#include <linux/fs.h>
#include <linux/mount.h>
-#include <linux/pagemap.h>
#include "i915_drv.h"
#include "i915_gemfs.h"
@@ -15,6 +14,7 @@ int i915_gemfs_init(struct drm_i915_private *i915)
{
struct file_system_type *type;
struct vfsmount *gemfs;
+ char *opts;
type = get_fs_type("tmpfs");
if (!type)
@@ -26,10 +26,26 @@ int i915_gemfs_init(struct drm_i915_private *i915)
*
* One example, although it is probably better with a per-file
* control, is selecting huge page allocations ("huge=within_size").
- * Currently unused due to bandwidth issues (slow reads) on Broadwell+.
+ * However, we only do so to offset the overhead of iommu lookups
+ * due to bandwidth issues (slow reads) on Broadwell+.
*/
- gemfs = kern_mount(type);
+ opts = NULL;
+ if (intel_vtd_active()) {
+ if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) {
+ static char huge_opt[] = "huge=within_size"; /* r/w */
+
+ opts = huge_opt;
+ drm_info(&i915->drm,
+ "Transparent Hugepage mode '%s'\n",
+ opts);
+ } else {
+ drm_notice(&i915->drm,
+ "Transparent Hugepage support is recommended for optimal performance when IOMMU is enabled!\n");
+ }
+ }
+
+ gemfs = vfs_kern_mount(type, SB_KERNMOUNT, type->name, opts);
if (IS_ERR(gemfs))
return PTR_ERR(gemfs);
--
2.30.2
More information about the dri-devel
mailing list