[PATCH v2 2/3] drm/probe-helper: Create a HPD IRQ event helper for a single connector
Sam Ravnborg
sam at ravnborg.org
Tue Sep 14 10:41:55 UTC 2021
Hi Maxime,
On Tue, Sep 14, 2021 at 12:17:23PM +0200, Maxime Ripard wrote:
> The drm_helper_hpd_irq_event() function is iterating over all the
> connectors when an hotplug event is detected.
>
> During that iteration, it will call each connector detect function and
> figure out if its status changed.
>
> Finally, if any connector changed, it will notify the user-space and the
> clients that something changed on the DRM device.
>
> This is supposed to be used for drivers that don't have a hotplug
> interrupt for individual connectors. However, drivers that can use an
> interrupt for a single connector are left in the dust and can either
> reimplement the logic used during the iteration for each connector or
> use that helper and iterate over all connectors all the time.
>
> Since both are suboptimal, let's create a helper that will only perform
> the status detection on a single connector.
>
> Signed-off-by: Maxime Ripard <maxime at cerno.tech>
>
> ---
> Changes from v2:
> - Skip connectors with DRM_CONNECTOR_POLL_HPD in drm_helper_hpd_irq_event
> - Add drm_connector_helper_hpd_irq_event returned value documentation
> - Improve logging
>
> Changes from v1:
> - Rename the shared function
> - Move the hotplug event notification out of the shared function
> - Added missing locks
> - Improve the documentation
> - Switched to drm_dbg_kms
> ---
> drivers/gpu/drm/drm_probe_helper.c | 117 +++++++++++++++++++++--------
> include/drm/drm_probe_helper.h | 1 +
> 2 files changed, 87 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
> index 5b77fb5c1a32..a1ffc0c30b3a 100644
> --- a/drivers/gpu/drm/drm_probe_helper.c
> +++ b/drivers/gpu/drm/drm_probe_helper.c
> @@ -795,6 +795,87 @@ void drm_kms_helper_poll_fini(struct drm_device *dev)
> }
> EXPORT_SYMBOL(drm_kms_helper_poll_fini);
>
> +static bool check_connector_changed(struct drm_connector *connector)
> +{
> + struct drm_device *dev = connector->dev;
> + enum drm_connector_status old_status;
> + u64 old_epoch_counter;
> + bool changed = false;
> +
> + /* Only handle HPD capable connectors. */
> + drm_WARN_ON(dev, !(connector->polled & DRM_CONNECTOR_POLL_HPD));
This will WARN if DRM_CONNECTOR_POLL_HPD is not set - which the previous
code did not. I am not sure this is intentional.
Or have I missed something?
Sam
> +
> + drm_WARN_ON(dev, !mutex_is_locked(&dev->mode_config.mutex));
> +
> + old_status = connector->status;
> + old_epoch_counter = connector->epoch_counter;
> + connector->status = drm_helper_probe_detect(connector, NULL, false);
> +
> + if (old_epoch_counter == connector->epoch_counter) {
> + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] Same epoch counter %llu\n",
> + connector->base.id,
> + connector->name,
> + connector->epoch_counter);
> +
> + return false;
> + }
> +
> + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] status updated from %s to %s\n",
> + connector->base.id,
> + connector->name,
> + drm_get_connector_status_name(old_status)
> + drm_get_connector_status_name(connector->status));
> +
> + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] Changed epoch counter %llu => %llu\n",
> + connector->base.id,
> + connector->name,
> + old_epoch_counter,
> + connector->epoch_counter);
> +
> + return true;
> +}
> +
> +/**
> + * drm_connector_helper_hpd_irq_event - hotplug processing
> + * @connector: drm_connector
> + *
> + * Drivers can use this helper function to run a detect cycle on a connector
> + * which has the DRM_CONNECTOR_POLL_HPD flag set in its &polled member.
> + *
> + * This helper function is useful for drivers which can track hotplug
> + * interrupts for a single connector. Drivers that want to send a
> + * hotplug event for all connectors or can't track hotplug interrupts
> + * per connector need to use drm_helper_hpd_irq_event().
> + *
> + * This function must be called from process context with no mode
> + * setting locks held.
> + *
> + * Note that a connector can be both polled and probed from the hotplug
> + * handler, in case the hotplug interrupt is known to be unreliable.
> + *
> + * Returns:
> + * A boolean indicating whether the connector status changed or not
> + */
> +bool drm_connector_helper_hpd_irq_event(struct drm_connector *connector)
> +{
> + struct drm_device *dev = connector->dev;
> + bool changed;
> +
> + mutex_lock(&dev->mode_config.mutex);
> + changed = check_connector_changed(connector);
> + mutex_unlock(&dev->mode_config.mutex);
> +
> + if (changed) {
> + drm_kms_helper_hotplug_event(dev);
> + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] Sent hotplug event\n",
> + connector->base.id,
> + connector->name);
> + }
> +
> + return changed;
> +}
> +EXPORT_SYMBOL(drm_connector_helper_hpd_irq_event);
> +
> /**
> * drm_helper_hpd_irq_event - hotplug processing
> * @dev: drm_device
> @@ -808,9 +889,10 @@ EXPORT_SYMBOL(drm_kms_helper_poll_fini);
> * interrupts for each connector.
> *
> * Drivers which support hotplug interrupts for each connector individually and
> - * which have a more fine-grained detect logic should bypass this code and
> - * directly call drm_kms_helper_hotplug_event() in case the connector state
> - * changed.
> + * which have a more fine-grained detect logic can use
> + * drm_connector_helper_hpd_irq_event(). Alternatively, they should bypass this
> + * code and directly call drm_kms_helper_hotplug_event() in case the connector
> + * state changed.
> *
> * This function must be called from process context with no mode
> * setting locks held.
> @@ -825,9 +907,7 @@ bool drm_helper_hpd_irq_event(struct drm_device *dev)
> {
> struct drm_connector *connector;
> struct drm_connector_list_iter conn_iter;
> - enum drm_connector_status old_status;
> bool changed = false;
> - u64 old_epoch_counter;
>
> if (!dev->mode_config.poll_enabled)
> return false;
> @@ -839,33 +919,8 @@ bool drm_helper_hpd_irq_event(struct drm_device *dev)
> if (!(connector->polled & DRM_CONNECTOR_POLL_HPD))
> continue;
>
> - old_status = connector->status;
> -
> - old_epoch_counter = connector->epoch_counter;
> -
> - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Old epoch counter %llu\n", connector->base.id,
> - connector->name,
> - old_epoch_counter);
> -
> - connector->status = drm_helper_probe_detect(connector, NULL, false);
> - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
> - connector->base.id,
> - connector->name,
> - drm_get_connector_status_name(old_status),
> - drm_get_connector_status_name(connector->status));
> -
> - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] New epoch counter %llu\n",
> - connector->base.id,
> - connector->name,
> - connector->epoch_counter);
> -
> - /*
> - * Check if epoch counter had changed, meaning that we need
> - * to send a uevent.
> - */
> - if (old_epoch_counter != connector->epoch_counter)
> + if (check_connector_changed(connector))
> changed = true;
> -
> }
> drm_connector_list_iter_end(&conn_iter);
> mutex_unlock(&dev->mode_config.mutex);
> diff --git a/include/drm/drm_probe_helper.h b/include/drm/drm_probe_helper.h
> index 8d3ed2834d34..04c57564c397 100644
> --- a/include/drm/drm_probe_helper.h
> +++ b/include/drm/drm_probe_helper.h
> @@ -18,6 +18,7 @@ int drm_helper_probe_detect(struct drm_connector *connector,
> void drm_kms_helper_poll_init(struct drm_device *dev);
> void drm_kms_helper_poll_fini(struct drm_device *dev);
> bool drm_helper_hpd_irq_event(struct drm_device *dev);
> +bool drm_connector_helper_hpd_irq_event(struct drm_connector *connector);
> void drm_kms_helper_hotplug_event(struct drm_device *dev);
>
> void drm_kms_helper_poll_disable(struct drm_device *dev);
> --
> 2.31.1
More information about the dri-devel
mailing list