[PATCH v2] drm/sun4i: dw-hdmi: Fix HDMI PHY clock setup
Jernej Skrabec
jernej.skrabec at gmail.com
Wed Sep 15 17:58:36 UTC 2021
Recent rework, which made HDMI PHY driver a platform device, inadvertely
reversed clock setup order. HW is very touchy about it. Proper way is to
handle controllers resets and clocks first and HDMI PHYs second.
Currently, without this fix, first mode set completely fails (nothing on
HDMI monitor) on H3 era PHYs. On H6, it still somehow work.
Move HDMI PHY reset & clocks handling to sun8i_hdmi_phy_init() which
will assure that code is executed after controllers reset & clocks are
handled. Additionally, add sun8i_hdmi_phy_deinit() which will deinit
them at controllers driver unload.
Tested on A64, H3, H6 and R40.
Fixes: 9bf3797796f5 ("drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device")
Signed-off-by: Jernej Skrabec <jernej.skrabec at gmail.com>
---
Changes from v1:
- if sun8i_hdmi_phy_init() fails, go to error hanling instead of returning
immediately
- rename err_deassert_rst_phy -> err_assert_rst_phy
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 7 +-
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 4 +-
drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 97 ++++++++++++++------------
3 files changed, 61 insertions(+), 47 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
index f75fb157f2ff..016b877051da 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
@@ -216,11 +216,13 @@ static int sun8i_dw_hdmi_bind(struct device *dev, struct device *master,
goto err_disable_clk_tmds;
}
+ ret = sun8i_hdmi_phy_init(hdmi->phy);
+ if (ret)
+ goto err_disable_clk_tmds;
+
drm_encoder_helper_add(encoder, &sun8i_dw_hdmi_encoder_helper_funcs);
drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
- sun8i_hdmi_phy_init(hdmi->phy);
-
plat_data->mode_valid = hdmi->quirks->mode_valid;
plat_data->use_drm_infoframe = hdmi->quirks->use_drm_infoframe;
sun8i_hdmi_phy_set_ops(hdmi->phy, plat_data);
@@ -262,6 +264,7 @@ static void sun8i_dw_hdmi_unbind(struct device *dev, struct device *master,
struct sun8i_dw_hdmi *hdmi = dev_get_drvdata(dev);
dw_hdmi_unbind(hdmi->hdmi);
+ sun8i_hdmi_phy_deinit(hdmi->phy);
clk_disable_unprepare(hdmi->clk_tmds);
reset_control_assert(hdmi->rst_ctrl);
gpiod_set_value(hdmi->ddc_en, 0);
diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
index 74f6ed0e2570..bffe1b9cd3dc 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
@@ -169,6 +169,7 @@ struct sun8i_hdmi_phy {
struct clk *clk_phy;
struct clk *clk_pll0;
struct clk *clk_pll1;
+ struct device *dev;
unsigned int rcal;
struct regmap *regs;
struct reset_control *rst_phy;
@@ -205,7 +206,8 @@ encoder_to_sun8i_dw_hdmi(struct drm_encoder *encoder)
int sun8i_hdmi_phy_get(struct sun8i_dw_hdmi *hdmi, struct device_node *node);
-void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy);
+int sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy);
+void sun8i_hdmi_phy_deinit(struct sun8i_hdmi_phy *phy);
void sun8i_hdmi_phy_set_ops(struct sun8i_hdmi_phy *phy,
struct dw_hdmi_plat_data *plat_data);
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index c9239708d398..b64d93da651d 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -506,9 +506,60 @@ static void sun8i_hdmi_phy_init_h3(struct sun8i_hdmi_phy *phy)
phy->rcal = (val & SUN8I_HDMI_PHY_ANA_STS_RCAL_MASK) >> 2;
}
-void sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
+int sun8i_hdmi_phy_init(struct sun8i_hdmi_phy *phy)
{
+ int ret;
+
+ ret = reset_control_deassert(phy->rst_phy);
+ if (ret) {
+ dev_err(phy->dev, "Cannot deassert phy reset control: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(phy->clk_bus);
+ if (ret) {
+ dev_err(phy->dev, "Cannot enable bus clock: %d\n", ret);
+ goto err_assert_rst_phy;
+ }
+
+ ret = clk_prepare_enable(phy->clk_mod);
+ if (ret) {
+ dev_err(phy->dev, "Cannot enable mod clock: %d\n", ret);
+ goto err_disable_clk_bus;
+ }
+
+ if (phy->variant->has_phy_clk) {
+ ret = sun8i_phy_clk_create(phy, phy->dev,
+ phy->variant->has_second_pll);
+ if (ret) {
+ dev_err(phy->dev, "Couldn't create the PHY clock\n");
+ goto err_disable_clk_mod;
+ }
+
+ clk_prepare_enable(phy->clk_phy);
+ }
+
phy->variant->phy_init(phy);
+
+ return 0;
+
+err_disable_clk_mod:
+ clk_disable_unprepare(phy->clk_mod);
+err_disable_clk_bus:
+ clk_disable_unprepare(phy->clk_bus);
+err_assert_rst_phy:
+ reset_control_assert(phy->rst_phy);
+
+ return ret;
+}
+
+void sun8i_hdmi_phy_deinit(struct sun8i_hdmi_phy *phy)
+{
+ clk_disable_unprepare(phy->clk_mod);
+ clk_disable_unprepare(phy->clk_bus);
+ clk_disable_unprepare(phy->clk_phy);
+
+ reset_control_assert(phy->rst_phy);
}
void sun8i_hdmi_phy_set_ops(struct sun8i_hdmi_phy *phy,
@@ -638,6 +689,7 @@ static int sun8i_hdmi_phy_probe(struct platform_device *pdev)
return -ENOMEM;
phy->variant = (struct sun8i_hdmi_phy_variant *)match->data;
+ phy->dev = dev;
ret = of_address_to_resource(node, 0, &res);
if (ret) {
@@ -696,47 +748,10 @@ static int sun8i_hdmi_phy_probe(struct platform_device *pdev)
goto err_put_clk_pll1;
}
- ret = reset_control_deassert(phy->rst_phy);
- if (ret) {
- dev_err(dev, "Cannot deassert phy reset control: %d\n", ret);
- goto err_put_rst_phy;
- }
-
- ret = clk_prepare_enable(phy->clk_bus);
- if (ret) {
- dev_err(dev, "Cannot enable bus clock: %d\n", ret);
- goto err_deassert_rst_phy;
- }
-
- ret = clk_prepare_enable(phy->clk_mod);
- if (ret) {
- dev_err(dev, "Cannot enable mod clock: %d\n", ret);
- goto err_disable_clk_bus;
- }
-
- if (phy->variant->has_phy_clk) {
- ret = sun8i_phy_clk_create(phy, dev,
- phy->variant->has_second_pll);
- if (ret) {
- dev_err(dev, "Couldn't create the PHY clock\n");
- goto err_disable_clk_mod;
- }
-
- clk_prepare_enable(phy->clk_phy);
- }
-
platform_set_drvdata(pdev, phy);
return 0;
-err_disable_clk_mod:
- clk_disable_unprepare(phy->clk_mod);
-err_disable_clk_bus:
- clk_disable_unprepare(phy->clk_bus);
-err_deassert_rst_phy:
- reset_control_assert(phy->rst_phy);
-err_put_rst_phy:
- reset_control_put(phy->rst_phy);
err_put_clk_pll1:
clk_put(phy->clk_pll1);
err_put_clk_pll0:
@@ -753,12 +768,6 @@ static int sun8i_hdmi_phy_remove(struct platform_device *pdev)
{
struct sun8i_hdmi_phy *phy = platform_get_drvdata(pdev);
- clk_disable_unprepare(phy->clk_mod);
- clk_disable_unprepare(phy->clk_bus);
- clk_disable_unprepare(phy->clk_phy);
-
- reset_control_assert(phy->rst_phy);
-
reset_control_put(phy->rst_phy);
clk_put(phy->clk_pll0);
--
2.33.0
More information about the dri-devel
mailing list