[PATCH v3 12/13] drm/i915/dg2: configure TRANS_DP2_VFREQ{HIGH, LOW} for 128b/132b

[Jani Nikula]

On Fri, 17 Sep 2021, Ville Syrjälä <ville.syrjala at linux.intel.com> wrote:
> On Thu, Sep 09, 2021 at 03:52:04PM +0300, Jani Nikula wrote:
>> There's a new register pair for 128b/132b mode where you need to set the
>> pixel clock in Hz.
>> 
>> v2: Fix UHBR rate check, use intel_dp_is_uhbr() helper
>> 
>> Bspec: 54128
>> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
>
> Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

Thanks for the reviews, pushed up to and including this one.

BR,
Jani.


>
>> ---
>>  drivers/gpu/drm/i915/display/intel_dp_mst.c | 11 +++++++++++
>>  1 file changed, 11 insertions(+)
>> 
>> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
>> index d104441344c0..97af19fd9780 100644
>> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
>> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
>> @@ -550,6 +550,17 @@ static void intel_mst_enable_dp(struct intel_atomic_state *state,
>>  
>>  	clear_act_sent(encoder, pipe_config);
>>  
>> +	if (intel_dp_is_uhbr(pipe_config)) {
>> +		const struct drm_display_mode *adjusted_mode =
>> +			&pipe_config->hw.adjusted_mode;
>> +		u64 crtc_clock_hz = KHz(adjusted_mode->crtc_clock);
>> +
>> +		intel_de_write(dev_priv, TRANS_DP2_VFREQHIGH(pipe_config->cpu_transcoder),
>> +			       TRANS_DP2_VFREQ_PIXEL_CLOCK(crtc_clock_hz >> 24));
>> +		intel_de_write(dev_priv, TRANS_DP2_VFREQLOW(pipe_config->cpu_transcoder),
>> +			       TRANS_DP2_VFREQ_PIXEL_CLOCK(crtc_clock_hz & 0xffffff));
>> +	}
>> +
>>  	intel_ddi_enable_transcoder_func(encoder, pipe_config);
>>  
>>  	intel_de_rmw(dev_priv, TRANS_DDI_FUNC_CTL(trans), 0,
>> -- 
>> 2.30.2

-- 
Jani Nikula, Intel Open Source Graphics Center