[Intel-gfx] [PATCH 13/26] drm/i915: use the new iterator in i915_gem_busy_ioctl

Christian König ckoenig.leichtzumerken at gmail.com
Tue Sep 21 09:41:52 UTC 2021


Am 20.09.21 um 12:33 schrieb Tvrtko Ursulin:
> On 20/09/2021 11:13, Christian König wrote:
>> Am 20.09.21 um 10:45 schrieb Tvrtko Ursulin:
>>>
>>> On 17/09/2021 13:35, Christian König wrote:
>>>> This makes the function much simpler since the complex
>>>> retry logic is now handled else where.
>>>>
>>>> Signed-off-by: Christian König <christian.koenig at amd.com>
>>>> ---
>>>>   drivers/gpu/drm/i915/gem/i915_gem_busy.c | 32 
>>>> ++++++++----------------
>>>>   1 file changed, 11 insertions(+), 21 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/i915/gem/i915_gem_busy.c 
>>>> b/drivers/gpu/drm/i915/gem/i915_gem_busy.c
>>>> index 6234e17259c1..b1cb7ba688da 100644
>>>> --- a/drivers/gpu/drm/i915/gem/i915_gem_busy.c
>>>> +++ b/drivers/gpu/drm/i915/gem/i915_gem_busy.c
>>>> @@ -82,8 +82,8 @@ i915_gem_busy_ioctl(struct drm_device *dev, void 
>>>> *data,
>>>>   {
>>>>       struct drm_i915_gem_busy *args = data;
>>>>       struct drm_i915_gem_object *obj;
>>>> -    struct dma_resv_list *list;
>>>> -    unsigned int seq;
>>>> +    struct dma_resv_iter cursor;
>>>> +    struct dma_fence *fence;
>>>>       int err;
>>>>         err = -ENOENT;
>>>> @@ -109,27 +109,17 @@ i915_gem_busy_ioctl(struct drm_device *dev, 
>>>> void *data,
>>>>        * to report the overall busyness. This is what the 
>>>> wait-ioctl does.
>>>>        *
>>>>        */
>>>> -retry:
>>>> -    seq = raw_read_seqcount(&obj->base.resv->seq);
>>>> -
>>>> -    /* Translate the exclusive fence to the READ *and* WRITE 
>>>> engine */
>>>> -    args->busy = 
>>>> busy_check_writer(dma_resv_excl_fence(obj->base.resv));
>>>> -
>>>> -    /* Translate shared fences to READ set of engines */
>>>> -    list = dma_resv_shared_list(obj->base.resv);
>>>> -    if (list) {
>>>> -        unsigned int shared_count = list->shared_count, i;
>>>> -
>>>> -        for (i = 0; i < shared_count; ++i) {
>>>> -            struct dma_fence *fence =
>>>> -                rcu_dereference(list->shared[i]);
>>>> -
>>>> +    args->busy = false;
>>>> +    dma_resv_iter_begin(&cursor, obj->base.resv, true);
>>>> +    dma_resv_for_each_fence_unlocked(&cursor, fence) {
>>>
>>> You did not agree with my suggestion to reset args->busy on restart 
>>> and so preserve current behaviour?
>>
>> No, I want to keep the restart behavior internally to the dma_resv 
>> object and as far as I can see it should not make a difference here.
>
> To be clear, on paper difference between old and new implementation is 
> if the restart happens while processing the shared fences.
>
> Old implementation unconditionally goes to "args->busy =
> >>> busy_check_writer(dma_resv_excl_fence(obj->base.resv));" and so 
> overwrites the set of flags returned to userspace.
>
> New implementation can merge new read flags to the old set of flags 
> and so return a composition of past and current fences.
>
> Maybe it does not matter hugely in this case, depends if userspace 
> typically just restarts until flags are clear. But I am not sure.
>
> On the higher level - what do you mean with wanting to keep the 
> restart behaviour internal? Not providing iterators users means of 
> detecting it? I think it has to be provided.

Ok I will adjust that for now to get the patch set upstream. But in 
general when somebody outside of the dma_resv code base depends on the 
restart behavior then that's a bug inside the design of that code.

The callers should only care about what unsignaled fences are inside the 
dma_resv container and it shouldn't matter if those fences are presented 
once or multiple times because of a reset..

When this makes a difference we have a bug in the handling and should 
probably consider taking the dma_resv.lock instead.

Regards,
Christian.

>
> Regards,
>
> Tvrtko
>
>> Regards,
>> Christian.
>>
>>>
>>> Regards,
>>>
>>> Tvrtko
>>>
>>>> +        if (dma_resv_iter_is_exclusive(&cursor))
>>>> +            /* Translate the exclusive fence to the READ *and* 
>>>> WRITE engine */
>>>> +            args->busy = busy_check_writer(fence);
>>>> +        else
>>>> +            /* Translate shared fences to READ set of engines */
>>>>               args->busy |= busy_check_reader(fence);
>>>> -        }
>>>>       }
>>>> -
>>>> -    if (args->busy && read_seqcount_retry(&obj->base.resv->seq, seq))
>>>> -        goto retry;
>>>> +    dma_resv_iter_end(&cursor);
>>>>         err = 0;
>>>>   out:
>>>>
>>



More information about the dri-devel mailing list