[PATCH v3 1/6] drm/vc4: select PM (openrisc)

[Nathan Chancellor]

On Wed, Sep 22, 2021 at 10:41:56AM +0200, Maxime Ripard wrote:
> Hi Randy,
> 
> On Sun, Sep 19, 2021 at 09:40:44AM -0700, Randy Dunlap wrote:
> > On 8/19/21 6:59 AM, Maxime Ripard wrote:
> > > We already depend on runtime PM to get the power domains and clocks for
> > > most of the devices supported by the vc4 driver, so let's just select it
> > > to make sure it's there, and remove the ifdef.
> > > 
> > > Signed-off-by: Maxime Ripard <maxime at cerno.tech>
> > > ---
> > >   drivers/gpu/drm/vc4/Kconfig    | 1 +
> > >   drivers/gpu/drm/vc4/vc4_hdmi.c | 2 --
> > >   2 files changed, 1 insertion(+), 2 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/vc4/Kconfig b/drivers/gpu/drm/vc4/Kconfig
> > > index 118e8a426b1a..f774ab340863 100644
> > > --- a/drivers/gpu/drm/vc4/Kconfig
> > > +++ b/drivers/gpu/drm/vc4/Kconfig
> > > @@ -9,6 +9,7 @@ config DRM_VC4
> > >   	select DRM_KMS_CMA_HELPER
> > >   	select DRM_GEM_CMA_HELPER
> > >   	select DRM_PANEL_BRIDGE
> > > +	select PM
> > >   	select SND_PCM
> > >   	select SND_PCM_ELD
> > >   	select SND_SOC_GENERIC_DMAENGINE_PCM
> > > diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
> > > index c2876731ee2d..602203b2d8e1 100644
> > > --- a/drivers/gpu/drm/vc4/vc4_hdmi.c
> > > +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
> > > @@ -2107,7 +2107,6 @@ static int vc5_hdmi_init_resources(struct vc4_hdmi *vc4_hdmi)
> > >   	return 0;
> > >   }
> > > -#ifdef CONFIG_PM
> > >   static int vc4_hdmi_runtime_suspend(struct device *dev)
> > >   {
> > >   	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
> > > @@ -2128,7 +2127,6 @@ static int vc4_hdmi_runtime_resume(struct device *dev)
> > >   	return 0;
> > >   }
> > > -#endif
> > >   static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
> > >   {
> > > 
> > 
> > Hi,
> > 
> > FYI.
> > 
> > This still causes a build error on arch/openrisc/ since it does not support
> > CONFIG_PM (it does not source "kernel/power/Kconfig" like some other arches do):
> > 
> > ./arch/riscv/Kconfig:source "kernel/power/Kconfig"
> > ./arch/x86/Kconfig:source "kernel/power/Kconfig"
> > ./arch/nds32/Kconfig:source "kernel/power/Kconfig"
> > ./arch/sh/Kconfig:source "kernel/power/Kconfig"
> > ./arch/arc/Kconfig:source "kernel/power/Kconfig"
> > ./arch/arm64/Kconfig:source "kernel/power/Kconfig"
> > ./arch/xtensa/Kconfig:source "kernel/power/Kconfig"
> > ./arch/sparc/Kconfig:source "kernel/power/Kconfig"
> > ./arch/arm/Kconfig:source "kernel/power/Kconfig"
> > ./arch/mips/Kconfig:source "kernel/power/Kconfig"
> > ./arch/powerpc/Kconfig:source "kernel/power/Kconfig"
> > ./arch/um/Kconfig:source "kernel/power/Kconfig"
> > ./arch/ia64/Kconfig:source "kernel/power/Kconfig"
> > 
> > so with
> > CONFIG_DRM_VC4=y
> > # CONFIG_DRM_VC4_HDMI_CEC is not set
> > 
> > I still see
> > ../drivers/gpu/drm/vc4/vc4_hdmi.c:2139:12: warning: 'vc4_hdmi_runtime_suspend' defined but not used [-Wunused-function]
> >  2139 | static int vc4_hdmi_runtime_suspend(struct device *dev)
> >       |            ^~~~~~~~~~~~~~~~~~~~~~~~
> 
> With what version did you get that build error? -rc2 shouldn't have it
> anymore since the runtime_pm hooks introduction got reverted.

-next still contains these patches as Stephen effectively reverted the
changes in Linus' tree when merging in the drm-misc-fixes tree:

https://lore.kernel.org/r/20210920090729.19458953@canb.auug.org.au/

Cheers,
Nathan