[PATCH] dt-bindings: drm/bridge: ti-sn65dsi86: Fix reg value

[Geert Uytterhoeven]

make dtbs_check:

    arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dt.yaml: bridge at 2c: reg:0:0: 45 was expected

According to the datasheet, the I2C address can be either 0x2c or 0x2d,
depending on the ADDR control input.

Fixes: e3896e6dddf0b821 ("dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings")
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
Also seen with the in-flight Falcon DSI display output patch:

    arch/arm64/boot/dts/renesas/r8a779a0-falcon.dt.yaml: sn65dsi86 at 2c: reg:0:0: 45 was expected
---
 .../devicetree/bindings/display/bridge/ti,sn65dsi86.yaml        | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
index 1c2daf7c24cc0417..911564468c5e0f86 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
@@ -18,7 +18,7 @@ properties:
     const: ti,sn65dsi86
 
   reg:
-    const: 0x2d
+    enum: [ 0x2c, 0x2d ]
 
   enable-gpios:
     maxItems: 1
-- 
2.25.1