[PATCH] drm/bridge: parade-ps8640: check return values in ps8640_aux_transfer()
Tim Gardner
tim.gardner at canonical.com
Fri Sep 24 15:26:07 UTC 2021
Coverity complains of an unused return code:
CID 120459 (#1 of 1): Unchecked return value (CHECKED_RETURN)
7. check_return: Calling regmap_bulk_write without checking return value (as is
done elsewhere 199 out of 291 times).
204 regmap_bulk_write(map, PAGE0_SWAUX_ADDR_7_0, addr_len,
205 ARRAY_SIZE(addr_len));
While I was at it I noticed 2 other places where return codes were not being
used, or used incorrectly (which is a real bug).
Fix these errors by correctly using the returned error codes.
Cc: William Breathitt Gray <vilhelm.gray at gmail.com>
Cc: Syed Nayyar Waris <syednwaris at gmail.com>
Cc: Andrzej Hajda <a.hajda at samsung.com>
Cc: Neil Armstrong <narmstrong at baylibre.com>
Cc: Robert Foss <robert.foss at linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart at ideasonboard.com>
Cc: Jonas Karlman <jonas at kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec at gmail.com>
Cc: David Airlie <airlied at linux.ie>
Cc: Daniel Vetter <daniel at ffwll.ch>
Cc: linux-iio at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
Cc: dri-devel at lists.freedesktop.org
Signed-off-by: Tim Gardner <tim.gardner at canonical.com>
---
drivers/gpu/drm/bridge/parade-ps8640.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c
index 3aaa90913bf8..591da962970a 100644
--- a/drivers/gpu/drm/bridge/parade-ps8640.c
+++ b/drivers/gpu/drm/bridge/parade-ps8640.c
@@ -201,8 +201,12 @@ static ssize_t ps8640_aux_transfer(struct drm_dp_aux *aux,
addr_len[PAGE0_SWAUX_LENGTH - base] = (len == 0) ? SWAUX_NO_PAYLOAD :
((len - 1) & SWAUX_LENGTH_MASK);
- regmap_bulk_write(map, PAGE0_SWAUX_ADDR_7_0, addr_len,
+ ret = regmap_bulk_write(map, PAGE0_SWAUX_ADDR_7_0, addr_len,
ARRAY_SIZE(addr_len));
+ if (ret) {
+ DRM_DEV_ERROR(dev, "failed to bulk write ADDR_7_0: %d\n", ret);
+ return ret;
+ }
if (len && (request == DP_AUX_NATIVE_WRITE ||
request == DP_AUX_I2C_WRITE)) {
@@ -218,13 +222,17 @@ static ssize_t ps8640_aux_transfer(struct drm_dp_aux *aux,
}
}
- regmap_write(map, PAGE0_SWAUX_CTRL, SWAUX_SEND);
+ ret = regmap_write(map, PAGE0_SWAUX_CTRL, SWAUX_SEND);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "failed to write SEND: %d\n", ret);
+ return ret;
+ }
/* Zero delay loop because i2c transactions are slow already */
regmap_read_poll_timeout(map, PAGE0_SWAUX_CTRL, data,
!(data & SWAUX_SEND), 0, 50 * 1000);
- regmap_read(map, PAGE0_SWAUX_STATUS, &data);
+ ret = regmap_read(map, PAGE0_SWAUX_STATUS, &data);
if (ret) {
DRM_DEV_ERROR(dev, "failed to read PAGE0_SWAUX_STATUS: %d\n",
ret);
--
2.33.0
More information about the dri-devel
mailing list