[PATCH v3 6/6] drm/ingenic: Attach bridge chain to encoders
H. Nikolaus Schaller
hns at goldelico.com
Sat Sep 25 19:26:42 UTC 2021
Hi Paul,
> Am 25.09.2021 um 21:08 schrieb Paul Cercueil <paul at crapouillou.net>:
>
> Hi Paul & Nikolaus,
>
> If you spent some time debugging the issue
we did ...
> instead of complaining that my patchset breaks things...
... we did have a working version (without hdmi-connector)
and bisect pointed at your patch... So we debugged that.
So the lesson is: don't trust bisect.
And failed to make it work with hdmi-connector because the
ingenic-drm-drv reported errors.
>
> The fix is a one-liner in your downstream ingenic-dw-hdmi.c:
> .output_port = 1
> in the ingenic_dw_hdmi_plat_data struct.
Cool. How did you find that?
>
> Absolutely nothing else needs to be changed for HDMI to work here.
Great and thanks.
Will test asap and if it works as well, we can clean up a v4 patch set
for next week review.
BR and thanks,
Nikolaus
>
> Cheers,
> -Paul
>
>
> Le sam., sept. 25 2021 at 17:55:03 +0200, Paul Boddie <paul at boddie.org.uk> a écrit :
>> On Friday, 24 September 2021 10:29:02 CEST Paul Cercueil wrote:
>>> Le ven., sept. 24 2021 at 00:51:39 +0200, Paul Boddie
>>> >
>>> > 2. My approach, which just involves changing the Synopsys driver to
>>> > set the bridge type in dw_hdmi_probe like this:
>>> >
>>> > hdmi->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
>>> >
>>> > Otherwise, I don't see how the bridge's (struct drm_bridge) type will
>>> > be set.
>>> The bridge's type is set in hdmi-connector, from DTS. The 'type = "a"'
>>> will result in the bridge's .type to be set to DRM_MODE_CONNECTOR_HDMIA.
>> Actually, I found that hdmi-connector might not have been available because
>> CONFIG_DRM_DISPLAY_CONNECTOR was not enabled. Rectifying this, the connector
>> does get detected and enabled. However, the Synopsys driver remains unaware of
>> it, and so the bridge type in the Synopsys driver remains unset.
>> I do see that the connector sets the type on a bridge in its own private
>> structure, so there would be a need to propagate this type to the actual
>> bridge. In other words, what the connector does is distinct from the Synopsys
>> driver which acts as the bridge with regard to the Ingenic driver.
>> Perhaps the Synopsys driver should set the connector's bridge as the next
>> bridge, or maybe something is supposed to discover that the connector may act
>> as (or provide) a bridge after the Synopsys driver in the chain and then back-
>> propagate the bridge type along the chain.
>> [...]
>>> > And I removed any of the above hacks. What I observe, apart from an
>>> > inactive LCD controller (and ingenic-drm driver), is the following in
>>> > /sys/devices/platform/10180000.hdmi/:
>>> >
>>> > consumer:platform:13050000.lcdc0
>>> > consumer:platform:hdmi_connector
>> Interestingly, with the connector driver present, these sysfs entries no
>> longer appear.
>> [...]
>>> > For me, running modetest yields plenty of information about encoders,
>>> > connectors (and the supported modes via the EDID, thanks to my HDMI-A
>>> > hack), CRTCs, and planes. But no framebuffers are reported.
>>> Could you paste the result of "modetest -a -c -p" somewhere maybe?
>> I had to specify -M ingenic-drm as well, but here you go...
>> ----
>> Connectors:
>> id encoder status name size (mm) modes encoders
>> 35 34 connected HDMI-A-1 340x270 17 34
>> modes:
>> index name refresh (Hz) hdisp hss hse htot vdisp vss vse vtot)
>> #0 1280x1024 60.02 1280 1328 1440 1688 1024 1025 1028 1066 108000 flags:
>> phsync, pvsync; type: preferred, driver
>> #1 1280x1024 75.02 1280 1296 1440 1688 1024 1025 1028 1066 135000 flags:
>> phsync, pvsync; type: driver
>> #2 1280x960 60.00 1280 1376 1488 1800 960 961 964 1000 108000 flags: phsync,
>> pvsync; type: driver
>> #3 1152x864 75.00 1152 1216 1344 1600 864 865 868 900 108000 flags: phsync,
>> pvsync; type: driver
>> #4 1024x768 75.03 1024 1040 1136 1312 768 769 772 800 78750 flags: phsync,
>> pvsync; type: driver
>> #5 1024x768 70.07 1024 1048 1184 1328 768 771 777 806 75000 flags: nhsync,
>> nvsync; type: driver
>> #6 1024x768 60.00 1024 1048 1184 1344 768 771 777 806 65000 flags: nhsync,
>> nvsync; type: driver
>> #7 832x624 74.55 832 864 928 1152 624 625 628 667 57284 flags: nhsync,
>> nvsync; type: driver
>> #8 800x600 75.00 800 816 896 1056 600 601 604 625 49500 flags: phsync,
>> pvsync; type: driver
>> #9 800x600 72.19 800 856 976 1040 600 637 643 666 50000 flags: phsync,
>> pvsync; type: driver
>> #10 800x600 60.32 800 840 968 1056 600 601 605 628 40000 flags: phsync,
>> pvsync; type: driver
>> #11 800x600 56.25 800 824 896 1024 600 601 603 625 36000 flags: phsync,
>> pvsync; type: driver
>> #12 640x480 75.00 640 656 720 840 480 481 484 500 31500 flags: nhsync,
>> nvsync; type: driver
>> #13 640x480 72.81 640 664 704 832 480 489 492 520 31500 flags: nhsync,
>> nvsync; type: driver
>> #14 640x480 66.67 640 704 768 864 480 483 486 525 30240 flags: nhsync,
>> nvsync; type: driver
>> #15 640x480 59.94 640 656 752 800 480 490 492 525 25175 flags: nhsync,
>> nvsync; type: driver
>> #16 720x400 70.08 720 738 846 900 400 412 414 449 28320 flags: nhsync,
>> pvsync; type: driver
>> props:
>> 1 EDID:
>> flags: immutable blob
>> blobs:
>> value:
>> 00ffffffffffff00047232ad01010101
>> 2d0e010380221b782aaea5a6544c9926
>> 145054bfef0081808140714f01010101
>> 010101010101302a009851002a403070
>> 1300520e1100001e000000ff00343435
>> 3030353444454330300a000000fc0041
>> 4c313731350a202020202020000000fd
>> 00384c1e520e000a2020202020200051
>> 2 DPMS:
>> flags: enum
>> enums: On=0 Standby=1 Suspend=2 Off=3
>> value: 0
>> 5 link-status:
>> flags: enum
>> enums: Good=0 Bad=1
>> value: 0
>> 6 non-desktop:
>> flags: immutable range
>> values: 0 1
>> value: 0
>> 4 TILE:
>> flags: immutable blob
>> blobs:
>> value:
>> 20 CRTC_ID:
>> flags: object
>> value: 32
>> CRTCs:
>> id fb pos size
>> 32 39 (0,0) (1280x1024)
>> #0 60.02 1280 1328 1440 1688 1024 1025 1028 1066 108000 flags: phsync,
>> pvsync; type:
>> props:
>> 22 ACTIVE:
>> flags: range
>> values: 0 1
>> value: 1
>> 23 MODE_ID:
>> flags: blob
>> blobs:
>> value:
>> e0a5010000053005a005980600000004
>> 010404042a0400003c00000005000000
>> 00000000000000000000000000000000
>> 00000000000000000000000000000000
>> 00000000
>> 19 OUT_FENCE_PTR:
>> flags: range
>> values: 0 18446744073709551615
>> value: 0
>> 24 VRR_ENABLED:
>> flags: range
>> values: 0 1
>> value: 0
>> 28 GAMMA_LUT:
>> flags: blob
>> blobs:
>> value:
>> 29 GAMMA_LUT_SIZE:
>> flags: immutable range
>> values: 0 4294967295
>> value: 256
>> Planes:
>> id crtc fb CRTC x,y x,y gamma size possible crtcs
>> 31 32 39 0,0 0,0 0 0x00000001
>> formats: XR15 RG16 RG24 XR24 XR30
>> props:
>> 8 type:
>> flags: immutable enum
>> enums: Overlay=0 Primary=1 Cursor=2
>> value: 1
>> 17 FB_ID:
>> flags: object
>> value: 39
>> 18 IN_FENCE_FD:
>> flags: signed range
>> values: -1 2147483647
>> value: -1
>> 20 CRTC_ID:
>> flags: object
>> value: 32
>> 13 CRTC_X:
>> flags: signed range
>> values: -2147483648 2147483647
>> value: 0
>> 14 CRTC_Y:
>> flags: signed range
>> values: -2147483648 2147483647
>> value: 0
>> 15 CRTC_W:
>> flags: range
>> values: 0 2147483647
>> value: 1280
>> 16 CRTC_H:
>> flags: range
>> values: 0 2147483647
>> value: 1024
>> 9 SRC_X:
>> flags: range
>> values: 0 4294967295
>> value: 0
>> 10 SRC_Y:
>> flags: range
>> values: 0 4294967295
>> value: 0
>> 11 SRC_W:
>> flags: range
>> values: 0 4294967295
>> value: 83886080
>> 12 SRC_H:
>> flags: range
>> values: 0 4294967295
>> value: 67108864
>> 33 0 0 0,0 0,0 0 0x00000001
>> formats: C8 XR15 RG16 RG24 XR24 XR30
>> props:
>> 8 type:
>> flags: immutable enum
>> enums: Overlay=0 Primary=1 Cursor=2
>> value: 0
>> 17 FB_ID:
>> flags: object
>> value: 0
>> 18 IN_FENCE_FD:
>> flags: signed range
>> values: -1 2147483647
>> value: -1
>> 20 CRTC_ID:
>> flags: object
>> value: 0
>> 13 CRTC_X:
>> flags: signed range
>> values: -2147483648 2147483647
>> value: 0
>> 14 CRTC_Y:
>> flags: signed range
>> values: -2147483648 2147483647
>> value: 0
>> 15 CRTC_W:
>> flags: range
>> values: 0 2147483647
>> value: 0
>> 16 CRTC_H:
>> flags: range
>> values: 0 2147483647
>> value: 0
>> 9 SRC_X:
>> flags: range
>> values: 0 4294967295
>> value: 0
>> 10 SRC_Y:
>> flags: range
>> values: 0 4294967295
>> value: 0
>> 11 SRC_W:
>> flags: range
>> values: 0 4294967295
>> value: 0
>> 12 SRC_H:
>> flags: range
>> values: 0 4294967295
>> value: 0
>> ----
>>> If you have info about the CRTCs, encoders, connectors and EDID info,
>>> then I would assume it is very close to working fine.
>>> For your "no framebuffer" issue, keep in mind that CONFIG_FB and
>>> CONFIG_FRAMEBUFFER_CONSOLE are now disabled by default.
>> Yes, I discovered that CONFIG_FB was not enabled, so I did so.
>>> If that doesn't fix anything, that probably means that one
>>> .atomic_check() fails, so it would be a good place to start debugging.
>> There will be other things to verify in the Ingenic driver. As noted many
>> months ago, colour depth information has to be set in the DMA descriptors and
>> not the control register, but we are managing to do this successfully, as far
>> as I can tell, although there is always the potential for error.
>> Paul
>
>
More information about the dri-devel
mailing list