[PATCH v6 6/6] drm/sprd: add Unisoc's drm mipi dsi&dphy driver
Maxime Ripard
maxime at cerno.tech
Tue Sep 28 09:28:05 UTC 2021
On Sun, Sep 26, 2021 at 10:31:53PM +0800, Kevin Tang wrote:
> Maxime Ripard <maxime at cerno.tech> 于2021年9月17日周五 下午11:40写道：
> > > +static void sprd_dsi_encoder_mode_set(struct drm_encoder *encoder,
> > > + struct drm_display_mode *mode,
> > > + struct drm_display_mode *adj_mode)
> > > +{
> > > + struct sprd_dsi *dsi = encoder_to_dsi(encoder);
> > > +
> > > + drm_dbg(dsi->drm, "%s() set mode: %s\n", __func__, dsi->mode->name);
> > > +}
> >
> > You don't need that function?
> No need for now. need to delete it?
Yes
> > > +static int sprd_dsi_encoder_atomic_check(struct drm_encoder *encoder,
> > > + struct drm_crtc_state *crtc_state,
> > > + struct drm_connector_state *conn_state)
> > > +{
> > > + return 0;
> > > +}
> >
> > Ditto
>
> No need for now. need to delete it?
Yep
> > > +static int sprd_dsi_find_panel(struct sprd_dsi *dsi)
> > > +{
> > > + struct device *dev = dsi->host.dev;
> > > + struct device_node *child, *lcds_node;
> > > + struct drm_panel *panel;
> > > +
> > > + /* search /lcds child node first */
> > > + lcds_node = of_find_node_by_path("/lcds");
> > > + for_each_child_of_node(lcds_node, child) {
> > > + panel = of_drm_find_panel(child);
> > > + if (!IS_ERR(panel)) {
> > > + dsi->panel = panel;
> > > + return 0;
> > > + }
> > > + }
> > > +
> > > + /*
> > > + * If /lcds child node search failed, we search
> > > + * the child of dsi host node.
> > > + */
> > > + for_each_child_of_node(dev->of_node, child) {
> > > + panel = of_drm_find_panel(child);
> > > + if (!IS_ERR(panel)) {
> > > + dsi->panel = panel;
> > > + return 0;
> > > + }
> > > + }
> > > +
> > > + drm_err(dsi->drm, "of_drm_find_panel() failed\n");
> > > + return -ENODEV;
> > > +}
> >
> > Just use devm_drm_of_get_bridge there
>
> We use drm_panel_init and drm_panel_add API to add panel, so here is a
> panel device, not a bridge.
Like Sam said, the panel API is on its way out and is being superseded
by bridge_panels.
> > > +static int sprd_dsi_host_init(struct sprd_dsi *dsi, struct device *dev)
> > > +{
> > > + int ret;
> > > +
> > > + dsi->host.dev = dev;
> > > + dsi->host.ops = &sprd_dsi_host_ops;
> > > +
> > > + ret = mipi_dsi_host_register(&dsi->host);
> > > + if (ret)
> > > + drm_err(dsi->drm, "failed to register dsi host\n");
> > > +
> > > + return ret;
> > > +}
> > >
> > > [...]
> > >
> > > +static int sprd_dsi_connector_init(struct drm_device *drm, struct sprd_dsi *dsi)
> > > +{
> > > + struct drm_encoder *encoder = &dsi->encoder;
> > > + struct drm_connector *connector = &dsi->connector;
> > > + int ret;
> > > +
> > > + connector->polled = DRM_CONNECTOR_POLL_HPD;
> > > +
> > > + ret = drm_connector_init(drm, connector,
> > > + &sprd_dsi_atomic_connector_funcs,
> > > + DRM_MODE_CONNECTOR_DSI);
> > > + if (ret) {
> > > + drm_err(drm, "drm_connector_init() failed\n");
> > > + return ret;
> > > + }
> > > +
> > > + drm_connector_helper_add(connector,
> > > + &sprd_dsi_connector_helper_funcs);
> > > +
> > > + drm_connector_attach_encoder(connector, encoder);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int sprd_dsi_context_init(struct sprd_dsi *dsi,
> > > + struct device *dev)
> > > +{
> > > + struct platform_device *pdev = to_platform_device(dev);
> > > + struct dsi_context *ctx = &dsi->ctx;
> > > + struct resource *res;
> > > +
> > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > + ctx->base = devm_ioremap(dev, res->start, resource_size(res));
> > > + if (!ctx->base) {
> > > + drm_err(dsi->drm, "failed to map dsi host registers\n");
> > > + return -ENXIO;
> > > + }
> > > +
> > > + ctx->pll = devm_kzalloc(dev, sizeof(*ctx->pll), GFP_KERNEL);
> > > + if (!ctx->pll)
> > > + return -ENOMEM;
> > > +
> > > + ctx->regmap = devm_regmap_init(dev, ®map_tst_io, dsi, &byte_config);
> > > + if (IS_ERR(ctx->regmap)) {
> > > + drm_err(dsi->drm, "dphy regmap init failed\n");
> > > + return PTR_ERR(ctx->regmap);
> > > + }
> > > +
> > > + ctx->data_hs2lp = 120;
> > > + ctx->data_lp2hs = 500;
> > > + ctx->clk_hs2lp = 4;
> > > + ctx->clk_lp2hs = 15;
> > > + ctx->max_rd_time = 6000;
> > > + ctx->int0_mask = 0xffffffff;
> > > + ctx->int1_mask = 0xffffffff;
> > > + ctx->enabled = true;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int sprd_dsi_bind(struct device *dev, struct device *master, void *data)
> > > +{
> > > + struct drm_device *drm = data;
> > > + struct sprd_dsi *dsi;
> > > + int ret;
> > > +
> > > + dsi = sprd_dsi_encoder_init(drm, dev);
> > > + if (IS_ERR(dsi))
> > > + return PTR_ERR(dsi);
> > > +
> > > + dsi->drm = drm;
> > > + dev_set_drvdata(dev, dsi);
> > > +
> > > + ret = sprd_dsi_connector_init(drm, dsi);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + ret = sprd_dsi_context_init(dsi, dev);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + ret = sprd_dsi_host_init(dsi, dev);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static void sprd_dsi_unbind(struct device *dev,
> > > + struct device *master, void *data)
> > > +{
> > > + struct sprd_dsi *dsi = dev_get_drvdata(dev);
> > > +
> > > + mipi_dsi_host_unregister(&dsi->host);
> > > +}
> > > +
> > > +static const struct component_ops dsi_component_ops = {
> > > + .bind = sprd_dsi_bind,
> > > + .unbind = sprd_dsi_unbind,
> > > +};
> > > +
> > > +static const struct of_device_id dsi_match_table[] = {
> > > + { .compatible = "sprd,sharkl3-dsi-host" },
> > > + { /* sentinel */ },
> > > +};
> > > +
> > > +static int sprd_dsi_probe(struct platform_device *pdev)
> > > +{
> > > + return component_add(&pdev->dev, &dsi_component_ops);
> >
> > In order to prevent probe issues, you need to register you mipi_dsi_host
> > here, see:
> > https://lore.kernel.org/dri-devel/20210910101218.1632297-3-maxime@cerno.tech/
>
> We register mipi_dsi_hot on our panel driver, like this:
>
> 1092 ret = mipi_dsi_attach(slave);
> 1093 if (ret) {
> 1094 DRM_ERROR("failed to attach dsi panel to host\n");
> 1095 drm_panel_remove(&panel->base);
> 1096 return ret;
> 1097 }
It's not about when you attach, but when you call
mipi_dsi_host_register. You're doing it in sprd_dsi_host_init that you
call in bind(), which is against the best practices and will create
probing issues in the future.
Maxime
More information about the dri-devel
mailing list