[PATCH 05/11] drm/msm/dpu: move dpu_hw_pipe_cfg out of struct dpu_plane
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Thu Sep 30 13:59:56 UTC 2021
struct dpu_hw_pipe_cfg represents an interim state during atomic
update/color fill, so move it out of struct dpu_plane.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 104 ++++++++++++----------
1 file changed, 57 insertions(+), 47 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index ef3737642b0c..5288b5b824f8 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -104,7 +104,6 @@ struct dpu_plane {
uint32_t features; /* capabilities from catalog */
struct dpu_hw_pipe *pipe_hw;
- struct dpu_hw_pipe_cfg pipe_cfg;
uint32_t color_fill;
bool is_error;
bool is_rt_pipe;
@@ -143,14 +142,15 @@ static struct dpu_kms *_dpu_plane_get_kms(struct drm_plane *plane)
* _dpu_plane_calc_bw - calculate bandwidth required for a plane
* @plane: Pointer to drm plane.
* @fb: Pointer to framebuffer associated with the given plane
+ * @pipe_cfg: Pointer to pipe configuration
* Result: Updates calculated bandwidth in the plane state.
* BW Equation: src_w * src_h * bpp * fps * (v_total / v_dest)
* Prefill BW Equation: line src bytes * line_time
*/
static void _dpu_plane_calc_bw(struct drm_plane *plane,
- struct drm_framebuffer *fb)
+ struct drm_framebuffer *fb,
+ struct dpu_hw_pipe_cfg *pipe_cfg)
{
- struct dpu_plane *pdpu = to_dpu_plane(plane);
struct dpu_plane_state *pstate;
struct drm_display_mode *mode;
const struct dpu_format *fmt = NULL;
@@ -167,9 +167,9 @@ static void _dpu_plane_calc_bw(struct drm_plane *plane,
fmt = dpu_get_dpu_format_ext(fb->format->format, fb->modifier);
- src_width = drm_rect_width(&pdpu->pipe_cfg.src_rect);
- src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect);
- dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect);
+ src_width = drm_rect_width(&pipe_cfg->src_rect);
+ src_height = drm_rect_height(&pipe_cfg->src_rect);
+ dst_height = drm_rect_height(&pipe_cfg->dst_rect);
fps = drm_mode_vrefresh(mode);
vbp = mode->vtotal - mode->vsync_end;
vpw = mode->vsync_end - mode->vsync_start;
@@ -200,12 +200,12 @@ static void _dpu_plane_calc_bw(struct drm_plane *plane,
/**
* _dpu_plane_calc_clk - calculate clock required for a plane
* @plane: Pointer to drm plane.
+ * @pipe_cfg: Pointer to pipe configuration
* Result: Updates calculated clock in the plane state.
* Clock equation: dst_w * v_total * fps * (src_h / dst_h)
*/
-static void _dpu_plane_calc_clk(struct drm_plane *plane)
+static void _dpu_plane_calc_clk(struct drm_plane *plane, struct dpu_hw_pipe_cfg *pipe_cfg)
{
- struct dpu_plane *pdpu = to_dpu_plane(plane);
struct dpu_plane_state *pstate;
struct drm_display_mode *mode;
int dst_width, src_height, dst_height, fps;
@@ -213,9 +213,9 @@ static void _dpu_plane_calc_clk(struct drm_plane *plane)
pstate = to_dpu_plane_state(plane->state);
mode = &plane->state->crtc->mode;
- src_height = drm_rect_height(&pdpu->pipe_cfg.src_rect);
- dst_width = drm_rect_width(&pdpu->pipe_cfg.dst_rect);
- dst_height = drm_rect_height(&pdpu->pipe_cfg.dst_rect);
+ src_height = drm_rect_height(&pipe_cfg->src_rect);
+ dst_width = drm_rect_width(&pipe_cfg->dst_rect);
+ dst_height = drm_rect_height(&pipe_cfg->dst_rect);
fps = drm_mode_vrefresh(mode);
pstate->plane_clk =
@@ -252,14 +252,17 @@ static int _dpu_plane_calc_fill_level(struct drm_plane *plane,
fixed_buff_size = pdpu->catalog->caps->pixel_ram_size;
list_for_each_entry(tmp, &pdpu->mplane_list, mplane_list) {
+ u32 tmp_width;
+
if (!tmp->base.state->visible)
continue;
+ tmp_width = drm_rect_width(&tmp->base.state->src) >> 16;
DPU_DEBUG("plane%d/%d src_width:%d/%d\n",
pdpu->base.base.id, tmp->base.base.id,
src_width,
- drm_rect_width(&tmp->pipe_cfg.src_rect));
+ tmp_width);
src_width = max_t(u32, src_width,
- drm_rect_width(&tmp->pipe_cfg.src_rect));
+ tmp_width);
}
if (fmt->fetch_planes == DPU_PLANE_PSEUDO_PLANAR) {
@@ -319,9 +322,10 @@ static u64 _dpu_plane_get_qos_lut(const struct dpu_qos_lut_tbl *tbl,
* _dpu_plane_set_qos_lut - set QoS LUT of the given plane
* @plane: Pointer to drm plane
* @fb: Pointer to framebuffer associated with the given plane
+ * @pipe_cfg: Pointer to pipe configuration
*/
static void _dpu_plane_set_qos_lut(struct drm_plane *plane,
- struct drm_framebuffer *fb)
+ struct drm_framebuffer *fb, struct dpu_hw_pipe_cfg *pipe_cfg)
{
struct dpu_plane *pdpu = to_dpu_plane(plane);
const struct dpu_format *fmt = NULL;
@@ -335,7 +339,7 @@ static void _dpu_plane_set_qos_lut(struct drm_plane *plane,
fb->format->format,
fb->modifier);
total_fl = _dpu_plane_calc_fill_level(plane, fmt,
- drm_rect_width(&pdpu->pipe_cfg.src_rect));
+ drm_rect_width(&pipe_cfg->src_rect));
if (fmt && DPU_FORMAT_IS_LINEAR(fmt))
lut_usage = DPU_QOS_LUT_USAGE_LINEAR;
@@ -461,9 +465,10 @@ static void _dpu_plane_set_qos_ctrl(struct drm_plane *plane,
* _dpu_plane_set_ot_limit - set OT limit for the given plane
* @plane: Pointer to drm plane
* @crtc: Pointer to drm crtc
+ * @pipe_cfg: Pointer to pipe configuration
*/
static void _dpu_plane_set_ot_limit(struct drm_plane *plane,
- struct drm_crtc *crtc)
+ struct drm_crtc *crtc, struct dpu_hw_pipe_cfg *pipe_cfg)
{
struct dpu_plane *pdpu = to_dpu_plane(plane);
struct dpu_vbif_set_ot_params ot_params;
@@ -472,8 +477,8 @@ static void _dpu_plane_set_ot_limit(struct drm_plane *plane,
memset(&ot_params, 0, sizeof(ot_params));
ot_params.xin_id = pdpu->pipe_hw->cap->xin_id;
ot_params.num = pdpu->pipe_hw->idx - SSPP_NONE;
- ot_params.width = drm_rect_width(&pdpu->pipe_cfg.src_rect);
- ot_params.height = drm_rect_height(&pdpu->pipe_cfg.src_rect);
+ ot_params.width = drm_rect_width(&pipe_cfg->src_rect);
+ ot_params.height = drm_rect_height(&pipe_cfg->src_rect);
ot_params.is_wfd = !pdpu->is_rt_pipe;
ot_params.frame_rate = drm_mode_vrefresh(&crtc->mode);
ot_params.vbif_idx = VBIF_RT;
@@ -651,17 +656,18 @@ static void _dpu_plane_setup_csc(struct dpu_plane *pdpu)
static void _dpu_plane_setup_scaler(struct dpu_plane *pdpu,
struct dpu_plane_state *pstate,
- const struct dpu_format *fmt, bool color_fill)
+ const struct dpu_format *fmt, bool color_fill,
+ struct dpu_hw_pipe_cfg *pipe_cfg)
{
const struct drm_format_info *info = drm_format_info(fmt->base.pixel_format);
/* don't chroma subsample if decimating */
/* update scaler. calculate default config for QSEED3 */
_dpu_plane_setup_scaler3(pdpu, pstate,
- drm_rect_width(&pdpu->pipe_cfg.src_rect),
- drm_rect_height(&pdpu->pipe_cfg.src_rect),
- drm_rect_width(&pdpu->pipe_cfg.dst_rect),
- drm_rect_height(&pdpu->pipe_cfg.dst_rect),
+ drm_rect_width(&pipe_cfg->src_rect),
+ drm_rect_height(&pipe_cfg->src_rect),
+ drm_rect_width(&pipe_cfg->dst_rect),
+ drm_rect_height(&pipe_cfg->dst_rect),
&pstate->scaler3_cfg, fmt,
info->hsub, info->vsub);
}
@@ -679,6 +685,7 @@ static int _dpu_plane_color_fill(struct dpu_plane *pdpu,
const struct dpu_format *fmt;
const struct drm_plane *plane = &pdpu->base;
struct dpu_plane_state *pstate = to_dpu_plane_state(plane->state);
+ struct dpu_hw_pipe_cfg pipe_cfg;
DPU_DEBUG_PLANE(pdpu, "\n");
@@ -695,13 +702,15 @@ static int _dpu_plane_color_fill(struct dpu_plane *pdpu,
pstate->multirect_index);
/* override scaler/decimation if solid fill */
- pdpu->pipe_cfg.src_rect.x1 = 0;
- pdpu->pipe_cfg.src_rect.y1 = 0;
- pdpu->pipe_cfg.src_rect.x2 =
- drm_rect_width(&pdpu->pipe_cfg.dst_rect);
- pdpu->pipe_cfg.src_rect.y2 =
- drm_rect_height(&pdpu->pipe_cfg.dst_rect);
- _dpu_plane_setup_scaler(pdpu, pstate, fmt, true);
+ pipe_cfg.dst_rect = pstate->base.dst;
+
+ pipe_cfg.src_rect.x1 = 0;
+ pipe_cfg.src_rect.y1 = 0;
+ pipe_cfg.src_rect.x2 =
+ drm_rect_width(&pipe_cfg.dst_rect);
+ pipe_cfg.src_rect.y2 =
+ drm_rect_height(&pipe_cfg.dst_rect);
+ _dpu_plane_setup_scaler(pdpu, pstate, fmt, true, &pipe_cfg);
if (pdpu->pipe_hw->ops.setup_format)
pdpu->pipe_hw->ops.setup_format(pdpu->pipe_hw,
@@ -710,7 +719,7 @@ static int _dpu_plane_color_fill(struct dpu_plane *pdpu,
if (pdpu->pipe_hw->ops.setup_rects)
pdpu->pipe_hw->ops.setup_rects(pdpu->pipe_hw,
- &pdpu->pipe_cfg,
+ &pipe_cfg,
pstate->multirect_index);
if (pdpu->pipe_hw->ops.setup_pe)
@@ -720,7 +729,7 @@ static int _dpu_plane_color_fill(struct dpu_plane *pdpu,
if (pdpu->pipe_hw->ops.setup_scaler &&
pstate->multirect_index != DPU_SSPP_RECT_1)
pdpu->pipe_hw->ops.setup_scaler(pdpu->pipe_hw,
- &pdpu->pipe_cfg, &pstate->pixel_ext,
+ &pipe_cfg, &pstate->pixel_ext,
&pstate->scaler3_cfg);
}
@@ -1087,10 +1096,11 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
bool is_rt_pipe, update_qos_remap;
const struct dpu_format *fmt =
to_dpu_format(msm_framebuffer_format(fb));
+ struct dpu_hw_pipe_cfg pipe_cfg;
- memset(&(pdpu->pipe_cfg), 0, sizeof(struct dpu_hw_pipe_cfg));
+ memset(&pipe_cfg, 0, sizeof(struct dpu_hw_pipe_cfg));
- _dpu_plane_set_scanout(plane, pstate, &pdpu->pipe_cfg, fb);
+ _dpu_plane_set_scanout(plane, pstate, &pipe_cfg, fb);
pstate->pending = true;
@@ -1102,17 +1112,17 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
crtc->base.id, DRM_RECT_ARG(&state->dst),
(char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt));
- pdpu->pipe_cfg.src_rect = state->src;
+ pipe_cfg.src_rect = state->src;
/* state->src is 16.16, src_rect is not */
- pdpu->pipe_cfg.src_rect.x1 >>= 16;
- pdpu->pipe_cfg.src_rect.x2 >>= 16;
- pdpu->pipe_cfg.src_rect.y1 >>= 16;
- pdpu->pipe_cfg.src_rect.y2 >>= 16;
+ pipe_cfg.src_rect.x1 >>= 16;
+ pipe_cfg.src_rect.x2 >>= 16;
+ pipe_cfg.src_rect.y1 >>= 16;
+ pipe_cfg.src_rect.y2 >>= 16;
- pdpu->pipe_cfg.dst_rect = state->dst;
+ pipe_cfg.dst_rect = state->dst;
- _dpu_plane_setup_scaler(pdpu, pstate, fmt, false);
+ _dpu_plane_setup_scaler(pdpu, pstate, fmt, false, &pipe_cfg);
/* override for color fill */
if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG) {
@@ -1122,7 +1132,7 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
if (pdpu->pipe_hw->ops.setup_rects) {
pdpu->pipe_hw->ops.setup_rects(pdpu->pipe_hw,
- &pdpu->pipe_cfg,
+ &pipe_cfg,
pstate->multirect_index);
}
@@ -1139,7 +1149,7 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
if (pdpu->pipe_hw->ops.setup_scaler &&
pstate->multirect_index != DPU_SSPP_RECT_1)
pdpu->pipe_hw->ops.setup_scaler(pdpu->pipe_hw,
- &pdpu->pipe_cfg, &pstate->pixel_ext,
+ &pipe_cfg, &pstate->pixel_ext,
&pstate->scaler3_cfg);
if (pdpu->pipe_hw->ops.setup_multirect)
@@ -1192,12 +1202,12 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
pdpu->csc_ptr = 0;
}
- _dpu_plane_set_qos_lut(plane, fb);
+ _dpu_plane_set_qos_lut(plane, fb, &pipe_cfg);
_dpu_plane_set_danger_lut(plane, fb);
if (plane->type != DRM_PLANE_TYPE_CURSOR) {
_dpu_plane_set_qos_ctrl(plane, true, DPU_PLANE_QOS_PANIC_CTRL);
- _dpu_plane_set_ot_limit(plane, crtc);
+ _dpu_plane_set_ot_limit(plane, crtc, &pipe_cfg);
}
update_qos_remap = (is_rt_pipe != pdpu->is_rt_pipe) ||
@@ -1211,9 +1221,9 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
_dpu_plane_set_qos_remap(plane);
}
- _dpu_plane_calc_bw(plane, fb);
+ _dpu_plane_calc_bw(plane, fb, &pipe_cfg);
- _dpu_plane_calc_clk(plane);
+ _dpu_plane_calc_clk(plane, &pipe_cfg);
}
static void _dpu_plane_atomic_disable(struct drm_plane *plane)
--
2.33.0
More information about the dri-devel
mailing list