[PATCH v8 5/9] drm/i915/gt: Clear compress metadata for Flat-ccs objects
Ramalingam C
ramalingam.c at intel.com
Tue Apr 5 14:34:50 UTC 2022
Xe-HP and latest devices support Flat CCS which reserved a portion of
the device memory to store compression metadata, during the clearing of
device memory buffer object we also need to clear the associated
CCS buffer.
XY_CTRL_SURF_COPY_BLT is a BLT cmd used for reading and writing the
ccs surface of a lmem memory. So on Flat-CCS capable platform we use
XY_CTRL_SURF_COPY_BLT to clear the CCS meta data.
v2: Fixed issues with platform naming [Lucas]
v3: Rebased [Ram]
Used the round_up funcs [Bob]
v4: Fixed ccs blk calculation [Ram]
Added Kdoc on flat-ccs.
v5: GENMASK is used [Matt]
mocs fix [Matt]
Comments Fix [Matt]
Flush address programming [Ram]
v6: FLUSH_DW is fixed
Few coding style fix
v7: Adopting the XY_FAST_COLOR_BLT (Thomas]
v8: XY_CTRL_SURF_COPY_BLT for ccs clearing.
v9: emit_copy_ccs is used.
v10: ctrl_surf cmds are filled in caller itself. [Thomas]
only one ctrl surf cmd is used as size of lmem is <=8M [Thomas]
Signed-off-by: Ramalingam C <ramalingam.c at intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui at intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom at linux.intel.com>
---
drivers/gpu/drm/i915/gt/intel_gpu_commands.h | 16 +++
drivers/gpu/drm/i915/gt/intel_migrate.c | 137 ++++++++++++++++++-
2 files changed, 152 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/gt/intel_gpu_commands.h b/drivers/gpu/drm/i915/gt/intel_gpu_commands.h
index d1b8c23f7a9e..724ab069ddb6 100644
--- a/drivers/gpu/drm/i915/gt/intel_gpu_commands.h
+++ b/drivers/gpu/drm/i915/gt/intel_gpu_commands.h
@@ -154,8 +154,10 @@
#define MI_FLUSH_DW_PROTECTED_MEM_EN (1 << 22)
#define MI_FLUSH_DW_STORE_INDEX (1<<21)
#define MI_INVALIDATE_TLB (1<<18)
+#define MI_FLUSH_DW_CCS (1<<16)
#define MI_FLUSH_DW_OP_STOREDW (1<<14)
#define MI_FLUSH_DW_OP_MASK (3<<14)
+#define MI_FLUSH_DW_LLC (1<<9)
#define MI_FLUSH_DW_NOTIFY (1<<8)
#define MI_INVALIDATE_BSD (1<<7)
#define MI_FLUSH_DW_USE_GTT (1<<2)
@@ -204,6 +206,20 @@
#define GFX_OP_DRAWRECT_INFO ((0x3<<29)|(0x1d<<24)|(0x80<<16)|(0x3))
#define GFX_OP_DRAWRECT_INFO_I965 ((0x7900<<16)|0x2)
+#define XY_CTRL_SURF_INSTR_SIZE 5
+#define MI_FLUSH_DW_SIZE 3
+#define XY_CTRL_SURF_COPY_BLT ((2 << 29) | (0x48 << 22) | 3)
+#define SRC_ACCESS_TYPE_SHIFT 21
+#define DST_ACCESS_TYPE_SHIFT 20
+#define CCS_SIZE_MASK 0x3FF
+#define CCS_SIZE_SHIFT 8
+#define XY_CTRL_SURF_MOCS_MASK GENMASK(31, 25)
+#define NUM_CCS_BYTES_PER_BLOCK 256
+#define NUM_BYTES_PER_CCS_BYTE 256
+#define NUM_CCS_BLKS_PER_XFER 1024
+#define INDIRECT_ACCESS 0
+#define DIRECT_ACCESS 1
+
#define COLOR_BLT_CMD (2 << 29 | 0x40 << 22 | (5 - 2))
#define XY_COLOR_BLT_CMD (2 << 29 | 0x50 << 22)
#define XY_FAST_COLOR_BLT_CMD (2 << 29 | 0x44 << 22)
diff --git a/drivers/gpu/drm/i915/gt/intel_migrate.c b/drivers/gpu/drm/i915/gt/intel_migrate.c
index f9f3b0e7ed87..2446ff70ce45 100644
--- a/drivers/gpu/drm/i915/gt/intel_migrate.c
+++ b/drivers/gpu/drm/i915/gt/intel_migrate.c
@@ -17,6 +17,8 @@ struct insert_pte_data {
#define CHUNK_SZ SZ_8M /* ~1ms at 8GiB/s preemption delay */
+#define GET_CCS_BYTES(i915, size) (HAS_FLAT_CCS(i915) ? \
+ DIV_ROUND_UP(size, NUM_BYTES_PER_CCS_BYTE) : 0)
static bool engine_supports_migration(struct intel_engine_cs *engine)
{
if (!engine)
@@ -467,6 +469,123 @@ static bool wa_1209644611_applies(int ver, u32 size)
return height % 4 == 3 && height <= 8;
}
+/**
+ * DOC: Flat-CCS - Memory compression for Local memory
+ *
+ * On Xe-HP and later devices, we use dedicated compression control state (CCS)
+ * stored in local memory for each surface, to support the 3D and media
+ * compression formats.
+ *
+ * The memory required for the CCS of the entire local memory is 1/256 of the
+ * local memory size. So before the kernel boot, the required memory is reserved
+ * for the CCS data and a secure register will be programmed with the CCS base
+ * address.
+ *
+ * Flat CCS data needs to be cleared when a lmem object is allocated.
+ * And CCS data can be copied in and out of CCS region through
+ * XY_CTRL_SURF_COPY_BLT. CPU can't access the CCS data directly.
+ *
+ * When we exhaust the lmem, if the object's placements support smem, then we can
+ * directly decompress the compressed lmem object into smem and start using it
+ * from smem itself.
+ *
+ * But when we need to swapout the compressed lmem object into a smem region
+ * though objects' placement doesn't support smem, then we copy the lmem content
+ * as it is into smem region along with ccs data (using XY_CTRL_SURF_COPY_BLT).
+ * When the object is referred, lmem content will be swaped in along with
+ * restoration of the CCS data (using XY_CTRL_SURF_COPY_BLT) at corresponding
+ * location.
+ */
+
+static inline u32 *i915_flush_dw(u32 *cmd, u32 flags)
+{
+ *cmd++ = MI_FLUSH_DW | flags;
+ *cmd++ = 0;
+ *cmd++ = 0;
+
+ return cmd;
+}
+
+static u32 calc_ctrl_surf_instr_size(struct drm_i915_private *i915, int size)
+{
+ u32 num_cmds, num_blks, total_size;
+
+ if (!GET_CCS_BYTES(i915, size))
+ return 0;
+
+ /*
+ * XY_CTRL_SURF_COPY_BLT transfers CCS in 256 byte
+ * blocks. one XY_CTRL_SURF_COPY_BLT command can
+ * transfer upto 1024 blocks.
+ */
+ num_blks = DIV_ROUND_UP(GET_CCS_BYTES(i915, size),
+ NUM_CCS_BYTES_PER_BLOCK);
+ num_cmds = DIV_ROUND_UP(num_blks, NUM_CCS_BLKS_PER_XFER);
+ total_size = XY_CTRL_SURF_INSTR_SIZE * num_cmds;
+
+ /*
+ * Adding a flush before and after XY_CTRL_SURF_COPY_BLT
+ */
+ total_size += 2 * MI_FLUSH_DW_SIZE;
+
+ return total_size;
+}
+
+static int emit_copy_ccs(struct i915_request *rq,
+ u32 dst_offset, u8 dst_access,
+ u32 src_offset, u8 src_access, int size)
+{
+ struct drm_i915_private *i915 = rq->engine->i915;
+ int mocs = rq->engine->gt->mocs.uc_index << 1;
+ u32 num_ccs_blks, ccs_ring_size;
+ u32 *cs;
+
+ ccs_ring_size = calc_ctrl_surf_instr_size(i915, size);
+ WARN_ON(!ccs_ring_size);
+
+ cs = intel_ring_begin(rq, round_up(ccs_ring_size, 2));
+ if (IS_ERR(cs))
+ return PTR_ERR(cs);
+
+ num_ccs_blks = DIV_ROUND_UP(GET_CCS_BYTES(i915, size),
+ NUM_CCS_BYTES_PER_BLOCK);
+ GEM_BUG_ON(num_ccs_blks > NUM_CCS_BLKS_PER_XFER);
+ cs = i915_flush_dw(cs, MI_FLUSH_DW_LLC | MI_FLUSH_DW_CCS);
+
+ /*
+ * The XY_CTRL_SURF_COPY_BLT instruction is used to copy the CCS
+ * data in and out of the CCS region.
+ *
+ * We can copy at most 1024 blocks of 256 bytes using one
+ * XY_CTRL_SURF_COPY_BLT instruction.
+ *
+ * In case we need to copy more than 1024 blocks, we need to add
+ * another instruction to the same batch buffer.
+ *
+ * 1024 blocks of 256 bytes of CCS represent a total 256KB of CCS.
+ *
+ * 256 KB of CCS represents 256 * 256 KB = 64 MB of LMEM.
+ */
+ *cs++ = XY_CTRL_SURF_COPY_BLT |
+ src_access << SRC_ACCESS_TYPE_SHIFT |
+ dst_access << DST_ACCESS_TYPE_SHIFT |
+ ((num_ccs_blks - 1) & CCS_SIZE_MASK) << CCS_SIZE_SHIFT;
+ *cs++ = src_offset;
+ *cs++ = rq->engine->instance |
+ FIELD_PREP(XY_CTRL_SURF_MOCS_MASK, mocs);
+ *cs++ = dst_offset;
+ *cs++ = rq->engine->instance |
+ FIELD_PREP(XY_CTRL_SURF_MOCS_MASK, mocs);
+
+ cs = i915_flush_dw(cs, MI_FLUSH_DW_LLC | MI_FLUSH_DW_CCS);
+ if (ccs_ring_size & 1)
+ *cs++ = MI_NOOP;
+
+ intel_ring_advance(rq, cs);
+
+ return 0;
+}
+
static int emit_copy(struct i915_request *rq,
u32 dst_offset, u32 src_offset, int size)
{
@@ -690,6 +809,7 @@ intel_context_migrate_clear(struct intel_context *ce,
u32 value,
struct i915_request **out)
{
+ struct drm_i915_private *i915 = ce->engine->i915;
struct sgt_dma it = sg_sgt(sg);
struct i915_request *rq;
u32 offset;
@@ -701,7 +821,7 @@ intel_context_migrate_clear(struct intel_context *ce,
GEM_BUG_ON(ce->ring->size < SZ_64K);
offset = 0;
- if (HAS_64K_PAGES(ce->engine->i915) && is_lmem)
+ if (HAS_64K_PAGES(i915) && is_lmem)
offset = CHUNK_SZ;
do {
@@ -743,6 +863,21 @@ intel_context_migrate_clear(struct intel_context *ce,
goto out_rq;
err = emit_clear(rq, offset, len, value, is_lmem);
+ if (err)
+ goto out_rq;
+
+ if (HAS_FLAT_CCS(i915) && is_lmem && !value) {
+ /*
+ * copy the content of memory into corresponding
+ * ccs surface
+ */
+ err = emit_copy_ccs(rq, offset, INDIRECT_ACCESS, offset,
+ DIRECT_ACCESS, len);
+ if (err)
+ goto out_rq;
+ }
+
+ err = rq->engine->emit_flush(rq, EMIT_INVALIDATE);
/* Arbitration is re-enabled between requests. */
out_rq:
--
2.20.1
More information about the dri-devel
mailing list